Philips QT4015 Manuel utilisateur

Always here to help you

www.philips.com/welcome

User manual

QT4015

QT4015
ENGLISH 4
 11
 18
EESTI 25
 32
 39
 46
 53
 60
 67
 74
 81
 88
 95
 102
 109

Introduction

Congratulations on your purchase and welcome to Philips!To fully



www.philips.com/welcome.

General description (Fig. 1)

1 Trimming comb

2 Cutting unit

3 Precision Zoom Lock™ adjustment ring

4 On/off slide with battery indicator

5 Socket for appliance plug

6 Pouch

7 Brush

8 Appliance plug

9 Adapter

Important

Read this user manual carefully before you use the appliance and save it for

future reference.

Danger

- Make sure the adapter does not get wet.

Warning

- The adapter contains a transformer. Do not cut off the adapter to



- This appliance is not intended for use by persons (including children) with





concerning use of the appliance by a person responsible for their safety.

- Children should be supervised to ensure that they do not play with the

appliance.

Caution

- Never immerse the appliance in water or rinse it under the tap.

Only the cutting unit can be rinsed under the tap.

- 



- Only use the adapter supplied.

- 



- This appliance is only intended for trimming the human beard. Do not

use it for any other purpose.

- Do not use the appliance if the cutting unit or the trimming comb is





This Philips appliance complies with all standards regarding electromagnetic





available today.

ENGLISH

General

- The appliance is equipped with an automatic voltage selector and is

suitable for mains voltages from 100 to 240 volts.

- The adapter transforms 100-240 volts to a safe low voltage of less than

24 volts.

Charging







to 60 minutes.

Note:You can use the appliance cordless as well as connected to the mains.

1 Make sure the appliance is switched off.

2 Insert the appliance plug into the appliance.

3 Put the adapter in the wall socket.

,

is charging.

,When the battery is fully charged, the charging light lights up green

continuously.After 30 minutes, the charging light goes out.

4 After charging, remove the adapter from the wall socket and pull the

appliance plug out of the appliance.

Battery low

When the battery is almost empty (when there are only 5 or fewer



Optimising the lifetime of the rechargeable battery



use it until the battery is completely empty. Continue to use the appliance

until the motor almost stops running during a session.Then recharge the



Using the appliance



start trimming.



too fast. Make smooth and gentle movements.

ENGLISH 5

Trimming with comb

1 Turn the Precision Zoom Lock™adjustment ring to the

desired setting.The selected setting is the setting in the centre of the

adjustment ring.

See the table below for an overview of the settings and the resulting hair

lengths.

Setting Resulting hair length Setting Resulting hair length

. 0.5mm . 5.5mm

1 1mm 6 6mm

. 1.5mm . 6.5mm

2 2mm 7 7mm

. 2.5mm . 7.5mm

3 3mm 8 8mm

. 3.5mm . 8.5mm

4 4mm 9 9mm

. 4.5mm . 9.5mm

5 5mm 10 10mm



familiarise yourself with the appliance.

2 Switch on the appliance.

3 To trim most effectively, move the trimmer against the hair growth

direction. Make sure the surface of the comb always stays in contact

with the skin.

4 If a lot of hair has accumulated in the beard trimming comb,

remove the comb and blow and/or shake the hair out of it.

The selected setting does not change when you do this.

3•4••1

ENGLISH6

Trimming at the unique ‘stubble look’ setting

1 To create a ‘stubble look’, trim with the beard trimming comb set

to setting 1.

Trimming without comb

Use the trimmer without beard trimming comb to trim full beards and

single hairs.

Be careful when you trim without comb because the cutting

element removes every hair it touches.

1 

2 Switch on the appliance.

3 Make well-controlled movements.Touch the hair lightly with the

trimmer.

Corded trimming



1 Switch off the appliance, insert the adapter in the wall socket and

wait a few seconds before you switch on the appliance.

Cleaning

Never use scouring pads, abrasive cleaning agents or aggressive liquids

such as alcohol, petrol or acetone to clean the appliance.

1 Make sure the appliance is switched off and disconnected from the

mains.

2 Wipe the housing of the appliance with a dry cloth.

Never immerse the appliance in water or rinse it under the tap.

3 Remove the trimming comb and clean it with the brush.

ENGLISH 7

4 Remove the cutting unit by pushing against the teeth of the cutting

unit and clean it with the brush or rinse it under the tap.

5 Shake off excess water and place the cutting unit back by inserting

the lug of the cutting unit into the guiding slot.

6 Push the cutting unit back onto the appliance (‘click’).

Replacement

Only replace a worn or damaged cutting unit with an original Philips cutting



1 Open the cutting unit.

2 Remove the old cutting unit by pushing against the teeth of the

cutting unit.

3 Insert the lug of the new cutting unit into the guiding slot.

4 Push the cutting unit back onto the appliance (‘click’).

ENGLISH8

Ordering accessories



www.shop.philips.com/service. If the online shop is not available in









Environment

- Do not throw away the appliance with the normal household waste





- The built-in rechargeable battery contains substances that may pollute

the environment.Always remove the battery before you discard and







service centre.The staff of this centre will remove the battery for you

and will dispose of it in an environmentally safe way.

Removing the rechargeable batteries

Only remove the rechargeable batteries if they are completely empty.

1 

until the motor stops.

2 Insert a screwdriver in the hair chamber to separate the housing

part.

3 Cut the wires close to the batteries with a pair of household

scissors.

ENGLISH 9

4 Remove the printed circuit board with the rechargeable batteries.

5 Cut the battery tabs with a pair of scissors and separate the

batteries from the printed circuit board.



Guarantee and service



the Philips website at www.philips.com/support or contact the Philips







ENGLISH10

Autres manuels pour QT4015

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Philips tondeuse à cheveux

Philips

Philips QC5560 Manuel utilisateur

Philips

Philips QC5170/03 Manuel utilisateur

Philips

Philips HC9450 Manuel utilisateur

Philips

Philips QC5002 Manuel utilisateur

Philips

Philips QC5580/13 Manuel utilisateur

Philips

Philips Norelco QC5055 Manuel utilisateur

Philips

Philips QC5390 Manuel utilisateur

Philips

Philips T800 Manuel utilisateur

Philips

Philips QC5770/80 Manuel utilisateur

Philips

Philips HQC483 Manuel utilisateur

Philips

Philips QC5550/40 Manuel utilisateur

Philips

Philips HC5691 Manuel utilisateur

Philips

Philips QC5170 Manuel utilisateur

Philips

Philips HC5440/80 Manuel utilisateur

Philips

Philips BT5275 Manuel utilisateur

Philips

Philips QC5530 Manuel utilisateur

Philips

Philips Norelco QC5130 Manuel utilisateur

Philips

Philips QC5040 Manuel utilisateur

Philips

Philips HC3100 Manuel utilisateur

Philips

Philips NORELCO QC5340 Important s Manuel utilisateur

Philips

Philips HQC281/60 Manuel utilisateur

Philips

Philips HQC482 Manuel utilisateur

Philips

Philips HQC486/00 Manuel

Philips

Philips QC5390/15 Manuel utilisateur

Manuels tondeuse à cheveux populaires d'autres marques

Clatronic

Clatronic HSM 800 Manuel utilisateur

Mellerware

Mellerware MACRO ALDANY MA20001 Manuel utilisateur

Create

Create CLIPPER EASY Manuel utilisateur

VALERA

VALERA X-Master 652 Manuel utilisateur

Wahl

Wahl 1870Li Manuel utilisateur

Remington

Remington HC5780 Manuel utilisateur

Lister

Lister Legend Manuel utilisateur

Andis

Andis MBA 23125 Manuel utilisateur

Shear Magic

Shear Magic Nifty 1800 Manuel utilisateur

Andis

Andis US-1 Guide de référence rapide

Panasonic

Panasonic EH-KA81 Manuel utilisateur

Andis

Andis US-1 Instructions d'installation

Remington

Remington Classic HC450 Manuel utilisateur

Andis

Andis ML Instructions d'installation

O'Barber

O'Barber MINI SLIDE Manuel utilisateur

Oster

Oster 76110 Manuel utilisateur

Hyundai

Hyundai HC 420 Manuel utilisateur

Panasonic

Panasonic ER-GP80 Manuel utilisateur