Philips 28PW6516/01 Manuel utilisateur

Introduction

Table of Contents

Thank you for purchasing this television set.

This handbook has been designed to help you install and operate your TV set.

We would strongly recommend that you read it thoroughly.

We hope our technology meets entirely with your satisfaction.

Installation

Installing your television set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

The keys on the TV set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

The remote control keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Quick installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Sorting programmes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Using other menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Choosing a language and country . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Automatic tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Manual tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Programme name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Operation

Adjusting the picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Rotating the picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

EasyLink function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Adjusting the sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Adjusting the sound level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Surround modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Timer function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Locking the set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Teletext . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

16:9 Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Peripherals

Video recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Other equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

To select connected equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Connecting other appliances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

TV / VCR / DVD mode selector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Wireless surround speaker system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Installation of the wireless system Philips AD902W . . . . . . . . . . . . . . . . . . . . . . .16

Adjusting the surround speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Practical information

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Information for users in the UK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

FrançaisMagyar EnglishPyccÍËÈPolskiČeštinaSlovenčinaT rkçe

The television set has keys which are

located on the front or the top of the set

depending on the model.

The VOLUME - + (- ”+) keys are used to

adjust sound levels.

The PROGRAM - + (- P +) keys are used to

select the required programmes.

To access the menus, simultaneously hold

down the ”- and ”+ keys.The

PROGRAM - + keys may then be used to

select an adjustment and the - ”+ keys to

make that adjustment.

To exit from the menus, hold down the 2 ”

- and ”+ keys.

Note: when the CHILD LOCK function is activated,

these keys are unavailable (refer to EATURES

menu on page 8).

&Positioning the television set

Place your TV on a solid, stable surface, leaving

a space of at least 5 cm around the appliance.

To avoid accidents, do not put anything on the

set such as a cloth or cover, a container full of

liquid (vase) or a heat source (lamp).The set

must not be exposed to water.

éConnections

• Insert the aerial plug into the :socket at

the rear of the set.

• Insert the mains plug into a wall socket (220-

2 0 V / 50 Hz).

Optional Surround loudspeakers

To connect the optional surround loudspeakers

see the detailed informations, on page 16.

“Remote control

Insert the two R6-type batteries (supplied)

making sure that they are the right way round.

Check that the mode selector is set to TV.

The batteries supplied with this appliance do not

contain mercury or nickel cadmium. If you have

access to a recycling facility, please do not discard

your used batteries (if in doubt, consult your dealer).

When the batteries are replaced, use the same type.

‘Switching on

To switch on the set, press the on/off key.

A red indicator comes on and the screen

lights up. Go straight to the chapter Quick

installation on page .

If the television remains in standby mode,

press P #on the remote control.

The indicator will flashe when you use the remote

control.

5 cm

5 cm 5 cm

Installing your television set

The keys on the TV set

The remote control keys

List of programmes

To display/clear the list of programmes.

Use the keys IJ to select a

programme and the key Lto display it.

The symbol +is displayed alongside

all programmes which are locked (p.10)

or ?if they are not locked.

key not used

Mode selector (p. 15)

To activate the remote control

in TV,VCR (video recorder) or

DVD mode.

Select EXT sockets

Press several times to select

EXT1, EXT2 and EXT3, S-VHS2

and S-VHS3.

Smart sound controls

To access a series of settings:

VOICE, MUSIC,THEATRE and

return to PERSONAL

To display or exit from the menus

Cursor

These keys are used to move

within the menus or to have

direct access to the 16:9 formats

(p 12).

Mute

To disable or enable the sound.

Volume

To adjust the sound level

Sound mode

To switch from STEREO to

MONO or to choose between

Dual I and Dual II for

bilingual transmissions.

For TV sets fitted with NICAM

reception, depending on the

transmission, you can switch

from NICAM STEREO to

MONO or choose between

NICAM DUAL I, NICAM

DUAL II and MONO.

When the sound mode is switched

to MONO, the indication is

displayed in red.

Contrast +

To activate / de-activate the

automatic contrast adjustment

system (the dark areas are made

darker whilst maintaining the detail).

Standby

To set the TV to standby mode.

To switch the TV set on again,

press P @#or 09.

Numerical keys

For direct access to programmes.

For a 2 digit programme number,

the 2nd digit must be entered

before the dash disappears.

Smart picture controls

To access a series of settings: RICH,

NATURAL, SOFT, MULTIMEDIA

and return to PERSONAL.

Surround sound

To select the different surround

modes (see p.9)

Selecting TV programmes

To move up or down a programme.

The number, (the name) and the sound

mode are displayed for a few seconds.

or some TV programmes the title of

the programme appears at the

bottom of the screen.

Teletext features (p. 11)

Previous programme

To access the previously viewed

programme.

16:9 formats (p. 12)

Screen information

To display / remove the programme

number, the name (if it exists), the

time, the sound mode and the time

remaining on the timer. Hold down

for 5 seconds to permanently

display the programme number on

the screen.The volume level and the

smart control adjustments are then

displayed each time they are used.

Sleeptimer

To select the length of time

before the set automatically

switches to standby (from 0 to

2 0 minutes)

Quick installation

Sorting programmes

The first time you switch on the television, a

menu appears on the screen.This menu asks

you to choose the language of the menus :

If the menu does not appear, hold down the ”-

and ”+ keys on the set for 5 seconds to bring

it up.

&Use the IJ keys on the remote control to

choose your language then confirm with L.

éThen select your country using the IJ keys

and confirm with L.

If your country does not appear in the list, select “. . .”

“Tuning starts automatically.

The operation takes several minutes.

A display shows the search status and the

number of programmes found.When it has

finished the menu disappears.

To exit or interrupt the search, press the Hkey.

If no programmes are found, refer to the chapter

entitled Tips on p. 18.

‘If the transmitter or the cable network

broadcasts the automatic sort signal, the

programmes will be correctly numbered.

(If not, the programmes found will be

numbered in descending order starting at 99,

98, 97, etc.

Use the SORT menu to renumber them.

Some transmitters or cable networks broadcast

their own sort parameters (region, language, etc.).

Where this is the case, make your choice using the

IJ keys and confirm with L.. See also: EasyLink

function, page 7.

&Press the Hkey.The main menu is displayed.

éSelect INSTALL (J), then press L.

The INSTALL menu appears.

“Using the Jkey, select SORT then press L.

The SORT menu appears.The FROM option is

activated.

Note: this menu works as follows:

• Change " ROM" (enter the current programme

number),

• "TO" (enter the new number),

• EXCHANGE numbers" (the operation is carried out).

‘Select the programme you wish to renumber

using KL keys or 0to 9.

Example: to renumber programme 78 as 2

press 78.

(Select TO (using Jkey) and enter the new

number with KL keys or 0to 9(for the

example given, enter 2).

§Select EXCHANGE (Jkey) and press L.

The message EXCHANGED appears, the

exchange takes place. In our example,

programme 78 is renumbered as 2 (and

programme 2 as 78).

èSelect the option FROM (Ikey) and repeat

stages ‘to §as many times as there are

programmes to renumber.

See also: EasyLink function, page 7.

!To exit from the menus, press R.

• PICTURE

• SOUND

• FEATURES

• INSTALL

INSTALL

• LANGUAGE

• COUNTRY

• AUTO STORE

• MANUAL STORE

• SORT

• NAME

FROM

EXCHANGE

SELECT LANGUAGE

LANGUAGE

•

ENGLISH

DANSK

NEDERLANDS

FINNISH

FRANCAIS

COUNTRY

AUSTRIA

BELGIUM

SWITZERLAND

GERMANY

DENMARK

SEARCHING

PLEASE WAIT

PROG. NO. 2

215.18 MHZ

MENU MENU MENU

Using other menus

Choosing a language and country

Automatic tuning

&Press the Hkey to display the main menu.

éSelect INSTALL (J), then press L.

The INSTALL menu appears.

The LANGUAGE option is activated.

“Press Lto go into the LANGUAGE menu.

‘Select your language with the IJ keys.

The menus will appear in the chosen language.

(Press Kto exit the LANGUAGE menu.

§Select the option COUNTRY and press L.

èSelect your country with IJ keys.

If your country does not appear in the list, select

OTHER.

!Press Kto exit the COUNTRY menu.

çTo exit from the menus, press R.

See also: EasyLink function, page 7.

This menu allows you to automatically search

for all the programmes available in your region

(or on your cable network).

&First carry out operations &to !above, then:

éPress Jonce to select AUTO STORE then

press L.The search begins.

After several minutes, the INSTALL menu

reappears automatically.

“If the transmitter or the cable network

broadcasts the automatic sort signal, the

programmes will be correctly numbered.

‘If not, the programmes found will be

numbered in descending order starting at 99,

98, 97, etc.

Use the SORT menu to renumber them.

Some transmitters or cable networks broadcast

their own sort parameters (region, language, etc.).

Where this is the case, make your choice using the

IJ keys and confirm with L.

To exit or interrupt the search, press the Hkey. If

no picture is found, refer to the chapter entitled

Tips on p. 16.

See also: EasyLink function, page 7.

(To exit from the menus, press R.

PICTURE

• BRIGHTNESS

• COLOUR

• CONTRAST --I------ 9

• SHARPNESS

• STORE

• PICTURE

• SOUND

• FEATURES

• INSTALL

INSTALL

• LANGUAGE

• COUNTRY

• AUTO STORE

• MANUAL STORE

• SORT

•

NAME

ENGLISH

DANSK

NEDERLANDS

INSTALL

• LANGUAGE

• COUNTRY

• AUTO STORE

• MANUAL STORE

• SORT

•

NAME

SEARCHING

PLEASE WAIT

PROG. NO. 2

215.18 MHZ

Manual tuning

Programme name

This menu allows you to store the

programmes one by one.

&Press H.

éSelect INSTALL (J), then press L.

The INSTALL menu appears.

“Select MANUAL STORE (J) then press L.

The menu appears :

‘Press Lto go to the SYSTEM menu.

Use IJ to choose EUROPE (automatic

detection*) or manual detection with WEST

EUR (standard BG reception), EAST EUR

(standard DK reception), UK (standard I

reception) or FRANCE (standard LL').

Then press Kto exit from the menu.

* Except for rance (standard LL'): select the

option RANCE.

(Select SEARCH and press L.

The search begins.As soon as a programme is

found, the search will stop. If you know the

frequency of the programme required, enter

its number directly using the 09keys and

go to step è.

If no programme is found, refer to the Tips chapter

on page 18).

§If reception is un-satisfactory, select FINE

TUNE and hold down Kor Lkey.

èSelect PROG. NO (programme number) and

use the KLor 0to 9keys to enter the

desired number.

!Select STORE and press L.The message

STORED appears.The programme is stored.

See also: EasyLink function, page 7.

çRepeat steps (to !for each programme to

be stored.

To exit: press the Rkey.

You may, if you wish, give a name to the first

0 programmes (from 1 to 0).

&Press H.

éSelect INSTALL (J), then press L.

The INSTALL menu appears.

“Press J5 times to select NAME (concealed

at the bottom of the screen), then press L.

The menu appears :

‘Select the programme you wish to name using

the keys 09or @P#.

Note: at the time of installation, the programmes

are automatically named when the identification

signal is transmitted.

(Use the keys KL to move within the name

display area (5 characters).

§Use keys IJ to choose the characters.

èPress Hwhen the name has been entered.

The programme name is stored.

See also: EasyLink function, page 7.

!Repeat steps ‘to èfor each programme to

be named.

çTo exit from the menus, press R.

• PICTURE

• SOUND

• FEATURES

• INSTALL

INSTALL

MANUAL STORE

• SYSTEM

• SEARCH

• PROG. NO.

• FINE TUNE

• STORE

EUROPE

WEST EUR

EAST EUR

FRANCE

INSTALL

• LANGUAGE

• COUNTRY

• AUTO STORE

• MANUAL STORE

• SORT

•

NAME

BBC_1

Adjusting the picture

&Press Hthen L.

The PICTURE menu appears :

éUse IJ keys to select a setting and KL

keys to adjust.

Note: the menu is a scroll-down menu.

Keep the key Jheld down to access the settings

hidden at the bottom of the screen.

“Once the necessary adjustments have been

made, select the option STORE and press L

to store them.

‘To exit from the menus, press R.

Description of the settings:

• BRIGHTNESS: alters the brightness of the

image.

• COLOUR: alters the colour intensity.

• CONTRAST: alters the variation between

light and dark tones.

•

SHARPNESS: alters the crispness of the image.

• STORE: stores the picture settings.

• COLOUR TEMP (colour temperature):

adjusts the colour temperature of the

picture.Three options are available here:

COOL (blue white), NORMAL (balanced) or

WARM (red white).

• NR (Noise Reduction): alleviates fuzziness

(snowy picture).This setting is useful when

reception is difficult

EasyLink function

Rotating the picture

If the set is connected (by the EXT2 socket)

to a video equipped with the EasyLink

function, the language, country and channels

found are automatically transmitted to the

video recorder at the time of installation.

A message is displayed on-screen during

loading.The list of video recorder channels is

then the same as those of the set.

You must first check in the menus that the

Easylink function is activated:

&Press Hkey.

éSelect OPTIONS (J) and press L.The

OPTIONS menu is displayed.

“Use Jkey to select EASY LINK and press L

to set it to ON. If your video recorder is not

equipped with this function, set to OFF.

‘Press Rto exit the menus.

The EASY LINK setting is set to ON by default.

Larger screens are sensitive to variations in

the earth's magnetic field.This setting makes it

possible to compensate for this phenomenon.

&Press H.

éSelect FEATURES (J) and press L.

The FEATURES menu appears.

“Use Jkey to select ROTATION and use

KL keys to alter the angle of the image.

‘Press Rto exit from the menus.

(only available on certain versions)

• PICTURE

• SOUND

• FEATURES

• INSTALL

PICTURE

• BRIGHTNESS

• COLOUR

• CONTRAST

• SHARPNESS

• STORE

• COLOUR TEMP.

• NR

--I------ 9

This menu allows you to balance the sound

between the different speakers.

&Press H, select SOUND (J) and press L.

The SOUND menu appears :

éSelect TEST and press Lto set it to ON.

A continuous sound is emitted in turn from

each channel : left, right, centre and rear

(depending on the selected surround mode).

Remark : the rear channel only appears if surround

speakers are connected to the TV set.To change

the surround mode, press the )key.

“Select BALANCE, CENTRE or REAR and use

the KL keys to adjust the level of each

channel independently.The sequence stops

while the level is being changed and then

automatically starts up again.

‘To stop the test, press H.

Levels may also be adjusted without using the test

signal.

(To exit from the menus, press R.

Adjusting the sound level

Adjusting the sound

&Press H, select the SOUND option (J) and

press L.The SOUND menu appears :

éUse IJ keys to select a setting and keys

KL to adjust.

Note: to access the AVL, CORDLESS and DELAY

settings (hidden at the bottom of the screen) hold

down Jkey.The CORDLESS and DELAY settings

are only availables if surround loudspeakers are

connected to the TV set.The DELAY setting only

appears in DOLBY PRO LOGIC and HALL

SURROUND modes.

“Once the necessary adjustments have been

made, select the option STORE and press L

to store them.

‘To exit from the menus, press R.

Description of the settings:

• LEVEL: to balance the sound between the

different speakers (see below).

• EQUALIZER: to adjust the sound tone (from

bass: 120 Hz to treble: 10 kHz).

• SURROUND MODE: to select the different

surround modes (see next page).

• DELTA VOLUME (volume difference): allows

you to compensate for the volume differences

between the different programmes or the EXT

sockets.This setting is available for

programmes 1 - 0 and the EXT sockets.

• STORE: stores the sound settings.

• AVL (Automatic Volume Leveller): automatic

volume control used to avoid sudden

increases in volume, particularly when

changing programmes or during

advertisements.

• CORDLESS: to adjust the different parameters

of the cordless surround speakers (see p. 17).

• DELAY: to adjust the delay of surround effect

on the rear loudspedakers (31 is the default

value).

• PICTURE

• SOUND

• FEATURES

• INSTALL

SOUND

• LEVEL

• EQUALIZER

•

SURROUND MODE

• DELTA VOLUME

• STORE

• AVL

• CORDLESS

• DELAY

120 HZ

500 HZ

1500 HZ

5 KHZ

10 KHZ

• PICTURE

• SOUND

• FEATURES

• INSTALL

SOUND

• LEVEL

• EQUALIZER

•

SURROUND MODE

• DELTA VOLUME

• STORE

• AVL

• CORDLESS

DELAY

TEST

BALANCE

CENTRE

REAR

Stereo

Dolby

Pro Logic

Dolby

3 Stereo

Hall

Surround

3D Surround

”Dolby” and the double-D symbol £are trademarks of Dolby Laboratories Licensing

Corporation. Manufactured under license from Dolby Laboratories Licensing Corporation.

You have a direct access to the surround modes with the ) key

Stereo

The sound is reproduced on the left and right loudspeakers of the TV

set.

Dolby 3 Stereo (with stereo source)

The sound is distributed over the left, right and centre loudspeakers.

This mode is not recommended for mono transmissions (only the centre

channel will be used).

3D Surround (optimal with Dolby Surround source)

This mode enables you to experience the effect of Dolby Pro Logic

without the need of having rear speakers connected or activated.The

sound is reproduced on the left, right and centre loudspeakers giving

the impression of a rear surround effect.

Hall Surround (with mono or stereo source)

The sound is reproduced on the left, right and rear loudspeakers,

creating a "Hall Surround" ambient effect.This mode is recommended for

broadcasts that are not encoded in Dolby Surround, but where you wish

to have a rear surround effect.

This mode is only available when surround loudspeakers are connected to

the TV set.

Dolby Pro Logic * (with Dolby Surround sound source)

The left, right, centre and rear speakers reproduce the Dolby Pro Logic

sound.This mode is used when a film or programme has been recorded

or encoded in Dolby Surround sound.These films or programmes are

always indicated by the symbol : £ DOLBY SURROUND.

The DOLBY PRO LOGIC mode is only available when surround loudspeakers

are connected to the TV set.This mode is not recommended for mono

transmissions (only the centre channel will be used).

Description of the different surround modes

Surround modes

This menu allows you to select the different

surround modes.

&Press H, select SOUND (J) and press L.

The SOUND menu appears.

éSelect SURROUND MODE and press L.The

menu appears :

“Use the IJ keys to select the relevant

surround mode : STEREO, DOLBY 3 STEREO,

3D SURROUND, HALL SURROUND and

DOLBY PROLOGIC. For each setting, the

active loudspeakers are displayed on screen.

Remark: the DOLBY PRO LOGIC and HALL

SURROUND modes are only availables if surround

loudspeakers are connected to the TV set..

‘To exit from the menus, press R.

This TV set is also equipped with automatic

switching which will select the correct surround

mode, provided the specific signals are transmitted

with the programmes.This automatic format can

also be modified manually with the )key.

• PICTURE

• SOUND

• FEATURES

• INSTALL

SOUND

• LEVEL

• EQUALIZER

• SURROUND MODE

• DELTA VOLUME

• STORE

• AVL

• CORDLESS

• DELAY

D SURROUND

HALL SURROUND

DOLBY PRO LOGIC

STEREO

DOLBY STEREO

Timer function

Locking the set

This menu allows you to use your TV as an

alarm clock.

&Press H.

éSelect FEATURES (J) and press Ltwice.

The TIMER menu appears :

“Press Lto enter and exit the sub-menus and

use keys IJ to adjust:

‘TIME: enter current time.

Note: the time is updated automatically each time

the set is switched on using teletext information

taken from programme 1. If programme 1 does

not have teletext, the update will not take place.

(START TIME: enter the start time.

§STOP TIME: enter the stop time.

èPROG; NO;: enter the number of the

programme required.

!ACTIVATE: you can set the alarm to be

activated:

• ONCE ONLY for a one-off alarm,

• DAILY for a daily alarm or

• STOP to cancel.

çPress Rto set the TV to standby. It will

automatically switch on at the time

programmed. If you leave the TV switched on,

it will only change programme at the time

indicated.

The combination of the CHILD LOCK and TIMER

functions may be used to limit the length of time

your television is in use, for example, by your

children.

You can bar access to certain programmes or

completely lock the set by locking the keys.

Locking programmes

&Press H.

éSelect FEATURES (J) and press L.

“Select PARENTAL. CONT. (J) and press L.

‘Enter your confidential access code.The first

time, enter the code 0711 then confirm by

re-entering 0711.The menu appears.

(Press Lto go into the menu.

§Use keys IJ to select the required

programme and confirm with L.The symbol

+is displayed alongside the programmes or

sockets that have been locked.

èPress Rto exit.

To watch a programme which has been locked

you will now need to enter the confidential

code; otherwise the screen will remain blank.

The INSTALL menu access is also locked.

Caution: in the case of encrypted programmes

which use an external decoder, it is necessary to

lock the corresponding EXT socket.

To unlock all programmes

Repeat stages &to ‘above, then select

CLEAR ALL and press L.

To change the confidential code

Repeat stages &to ‘above, then:

(Select CHANGE CODE and enter your own

-digit number.

§Confirm by entering it again.

Your new code will be stored.

èPress Rto exit from the menus.

If you have forgotten your confidential code, enter

the universal code 0711 twice.

Locking the keys

&Press H, select FEATURES (J) and press L.

éSelect CHILD LOCK (J) and press Lto set

the lock to ON.

“Switch off the set and put the remote control

out of sight.

The set cannot be used (it can only be

switched on using the remote control).

‘To cancel: switch CHILD LOCK to OFF.

• PICTURE

• SOUND

• FEATURES

• INSTALL

FEATURES

TIMER

• TIME

• START TIME

• STOP TIME

• PROG; NO;

• ACTIVATE

10:56

• PICTURE

• SOUND

• FEATURES

• INSTALL

FEATURES

• TIMER

• CHILD LOCK

• PARENTAL CONT

• ROTATION

ACCES CODE

- - - -

Autres manuels pour 28PW6516/01

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Philips Téléviseur à écran plat

Philips

Philips 26HF7874 - annexe 3 Manuel utilisateur

Philips

Philips Cineos 32PF9641D Manuel utilisateur

Philips

Philips 23PFL5322/01 Manuel utilisateur

Philips

Philips 50PF9956 Manuel utilisateur

Philips

Philips 107FP4 Manuel utilisateur

Philips

Philips 42PF5421D Manuel utilisateur

Philips

Philips 32PF5321D Manuel utilisateur

Philips

Philips 42PFL3403D - annexe 1 Manuel utilisateur

Philips

Philips 32PF7521D Manuel utilisateur

Philips

Philips 26PF3302 Manuel utilisateur

Philips

Philips 32PW8807 Manuel utilisateur

Philips

Philips 37PFL5522D - annexe 2 Manuel utilisateur

Philips

Philips 30HW9100D Manuel utilisateur

Philips

Philips 32PFL3409/98 Manuel utilisateur

Philips

Philips 26HF5443/28 Manuel utilisateur

Philips

Philips Matchline 30PF9946/12 Manuel utilisateur

Philips

Philips 20PF4110 Manuel utilisateur

Philips

Philips 29PT9008 Manuel utilisateur

Philips

Philips 32-LCD DIGITAL CABLE READY FLAT HDTV PIXEL PLUS... Manuel utilisateur

Philips

Philips 15PF5121 Manuel utilisateur

Philips

Philips 42PFL9632D Manuel utilisateur

Philips

Philips 40PFL5706 Manuel utilisateur

Philips

Philips 42FD9934 Manuel utilisateur

Philips

Philips 37HF7543-37B Manuel utilisateur

Manuels Téléviseur à écran plat populaires d'autres marques

Samsung

Samsung LT-P326W Mode d’emploi

Sony

Sony WEGA KE-50XBR900, KE-42XBR900 Manuel utilisateur

JVC

JVC LT-26DX7BFN Manuel utilisateur

Samsung

Samsung CT2Z45 Manuel utilisateur

Samsung

Samsung LNR1550X Manuel utilisateur

Westinghouse

Westinghouse TX-42F970Z Manuel utilisateur

Toshiba

Toshiba 32BV500B Manuel utilisateur

Samsung

Samsung Smart TV UN55D6000 Mode d’emploi

RCA

RCA MR53R400 Manuel utilisateur

JVC

JVC GGT0362-001A-H Manuel utilisateur

Sanyo

Sanyo FVM4212 Manuel utilisateur

JVC

JVC LT-32Z48 Manuel utilisateur

Sony

Sony KE-42XBR900 - 42" Xbr Plasma Wega™ Integrated... Instructions d'utilisation

Vizio

Vizio M190MV Manuel d'utilisation et d'entretien

Samsung

Samsung UN55F7050AF Manuel utilisateur

RCA

RCA TruFlat F20TF30 Manuel utilisateur

Samsung

Samsung LW32A33W Guide de démarrage rapide

Sony

Sony FD Trinitron Wega KV-30HS420 Manuel utilisateur