Philips DCR 2020 Manuel utilisateur

DCR 2020

Benutzerhandbuch

User manual

Handleiding

DCR 2020_indice1 1/09/05 15:26 Page 1

Meaning of symbols

Important information:

Must be read and understood.

Your product has been designed and manufactured with high quality materials and

components, which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product or his

packaging, it means the product is covered by European Directive 2002/96/EC.

Please inform yourself about the local separate collection system for electronic

products.

Please act according to your local rules and do not dispose of your old products

with your normal household waste.The correct disposal of your old product will

help prevent potential negative consequences for the environment and human

health.

The “Material recyclability symbol” affixed on package cardboard and user manual

means these parts are recyclable.

So do not dispose of them with your normal household waste.

The “Material recyclability symbol” affixed on plastic packaging parts means these

parts are recyclable.

So do not dispose of them with your normal household waste.

The “Green Dot” affixed on cardboard means PHILIPS pays a financial duty to the

“Avoidance and Recovery of Packaging Waste” organization.

DCR 2020_indice1 1/09/05 15:26 Page 36

Your receiver has been manufactured to meet the appropriate safety

standards, but the instructions below must be followed to operate it safely.

These instructions must be kept for future reference.

-Before connecting the receiver to the mains, check that the mains supply voltage

corresponds to the voltage printed on the rear of the receiver. If the mains voltage

is different, consult the dealer.

-The receiver does not contain any user-serviceable parts.All maintenance work

must be carried out by qualified personnel.

-If you disconnect the receiver from the mains, make sure to unplug it from the wall

socket and not just from the AC socket at the back of the unit. Children could

seriously injure themselves, as the free end of the cable is still alive.

-Unplug the receiver during lightning storms.

-To prevent fire or shock hazard, do not expose this equipment to rain or moisture.

-The receiver should be placed on a firm surface, and the ventilation openings must

not be covered with items, such as newspapers, table clothes, curtains, etc.

-Do not install the receiver near any heat sources such as radiators, stoves or other

apparatus that produce heat. Protect it from direct sunlight.

-When installing the receiver, ensure there is a gap of approximately 2.5 cm around

the receiver to enable air to circulate freely and prevent overheating.

-Leave accessible the mains connector at the back of the unit in case emergency

shutdown is required.

-Do not place anycombustible objects on the receiver (candles, etc.).

-No objects filled with liquids, such as vases, shall be placed on the unit.The receiver

shall not be exposed to dripping or splashing. Should this happen, disconnect your

receiver from the mains and consult your dealer.

-Makesurethat children do not place any foreign objects in any of the openings.

-For cleaning, use a soft, damp (not wet) cloth. Never use any abrasive cloth and

aerosol cleaners.

Safety instructions

DCR 2020_indice1 1/09/05 15:26 Page 37

EN As you unpack your terminal, make sure the following accessories are included:

-1xRemote Control Unit

-2xAA batteries

-1xSCART Cable

-1xPower Cord

-1xAntenna Cord type F-IEC

-1xAdapter F male-IEC female

-1xSticker to be put on your smart card

-1xLeaflet explaining what to do with the adapter and sticker mentioned above

-1xUser Manual

-1xWorldwide Warranty booklet

Plastic bags can be dangerous.To avoid suffocation keep the bag away from

babies and children.

Refer to the safety section before connecting your terminal.

1Disconnect your TV set and recorder from the mains.

2Screw the adapter supplied with your receiver on the “RF IN” connector of the

rear panel.

3Integrate your terminal in your existing installation as shown on the diagram.

Unpacking the receiver

Quick installation guide

to AC outlet

PHILIPSPHILIPS

TV set

VCR/DVD

Cable Receiver

IN FROM ANT

OUT TO ANT

EXT 1

EXT 1 EXT 2

EXT 2

Cable Wall socket

For optimumconfiguration

DCR 2020_indice1 1/09/05 15:26 Page 38

4To avoid incorrect insertion of the smart card in the

slot, make sure you affix the reminder sticker

supplied with your receiver on the smart card so as

to cover the following text:“Deze zijde boven” (on

the side that has no chip).

5Insert your smart card in your receiver with the

golden or silver contacts facing up.

6Insert the two batteries supplied in your remote

control.

Batteries are removable from the remote using

common household tools (like a screwdriver,…).

The batteries supplied do not contain hazardous

substances such as Mercury, Cadmium, or Lead.

However, they must not be disposed of with your

household waste but to a local separate collection

system.

7Reconnect your TV set and recorder to the mains.

Do not connect your receiver yet!

8Switch on your TV set and select a channel.

9Plug the receiver’s power cord to the mains.The

welcome screen appears, then the First installation

screen.

10 Set your favourite menu language and press OK.

11 Set appropriate values for the following:

•Network ID: applicable network ID as indicated

by your operator. Please see operator booklet for

the right decimal value to be entered for your

region.

•Frequency: broadcast frequency predefined or

entered manually as indicated by your operator

(please see operator booklet).

•Symbol Rate: predefined value, which should not

be modified unless requested by your operator

•Modulation: predefined modulation type, which

should not be modified unless requested by your

operator

Symbol rate and modulation may be modified

manually upon request by your operator.

12 Press OK to start scanning for channels.

When scanning has been successfully completed, a

completion message is displayed, and then the receiver

tunes to the first channel in the list.

DCR 2020_indice1 1/09/05 15:26 Page 39

EN 36 Meaning of symbols

37 Safety instructions

38 Quick installation guide

38 Unpacking the receiver

42 Introduction

43 Product description

43 Front panel

44 Rear panel

45 Remote control

46 Inserting your Smart Card

47 Connecting your receiver

47 Connecting to TV and VCR/DVD player using

SCART Support

48 Connecting to your audio equipment

49 First installation

49 First installation settings

49 Channel scanning

50 Scanning failure

51 General Viewing Functions

51 Receiver wakeup

51 Channel selection

52 Channel banner

52 Channel Lists

52 TV or Radio mode selection

53 Volume & Audio Control

53 Recording timers

55 Guide (Electronic Programme Guide)

Contents

DCR 2020_indice1 1/09/05 15:26 Page 40

56 Settings

56 Menu

56 Favourites lists

59 Conditional access

60 User preferences

61 Setup

62 System information

63 Menu Tree

64 More about recording

(VCR or DVD control)

64 Connection for Easy Recording

65 Digital receiver and VCR or DVD settings

65 Recording with the VCR control feature

66 Troubleshooting

68 Technical specifications

DCR 2020_indice1 1/09/05 15:26 Page 41

EN Welcome to digital television!

The Philips Digital Cable Receiver DCR 2020 allows you to view a wide variety of

free-to-air and scrambled channels with the best digital picture and sound quality.

With this product you can enjoy advanced functions and features including:

-Digital picture and sound quality

-Wide screen format

-TV SCART and VCR/DVD SCART connector

-Up to 500 presets for TV and Radio channels

-Easy installation and use through the well-tested Euphoria User Interface

-Personal channel list and favourite lists

-Electronic Programme Guide

This user manual covers the installation of your receiver and the necessary steps to

use the various functions, so you can optimally enjoy every feature.

Lucas Covers, CEO BLC Digital Video STB

Paris, July 2005

Introduction

DCR 2020_indice1 1/09/05 15:26 Page 42

Front panel

1Smart Card slot: .......................see chapter Inserting your Smart Card

2U........................................... channel +

3I........................................... channel -

4........................................... mute/demute

5........................................... ON/”low power”

The front panel button hides the remote control receiver window and includes

twoLEDs indicating the receiver status. One of the LEDs blinks at remote control

command reception.

If the red LED is blinking continuously, it indicates that an upgrade of your terminal

software is taking place. Do not interrupt this operation.Wait for the green LED to

light up, indicating successful upgrade, and then continue as normal.

Receiver operating mode LED1LED2

Low Power red off

Standby off red

Running in TV mode off green

Running in Radio mode off orange

TV recording in progress red green

Radio recording in progress red orange

Recording ongoing during standby red red

Download in progress blinking red off

Product description

Q T

W RE

DCR 2020_indice1 1/09/05 15:26 Page 43

Rear panel

1230V~50Hz 10W max (**): ........ Socket used to connect the power cord.

2RF OUT (*): ............................ RF output used to connect your receiver to a

VCR/TV set to watch analogue channels only,

or to connect another receiver using the

adapter supplied with your receiver.

3RF IN (*): ............................... RF input used to connect the cable from the

wall socket. Refer to chapter Connecting your

receiver.

4TV (*): ................................... SCART (1)socket used to connect to your TV

set.

5VCR (*): ................................. SCART (1)socket used to connect your video

recorder or DVD player/recorder.

6L/R (*): ................................... Left/Right analogue audio cinch outputs used to

connect your HiFi/audio receiver system.

7SPDIF (*): ............................... Digital audio cinch output used to connect

your HiFi/audio receiver system.

8SERIAL (*): .............................. RS232 socket used for serial data transfer.

The label showing the type and serial number is underneath the receiver.

(1)SCART is also called Euroconnector or Peritel.

*Safety Extra Low Voltage

** Hazardous Voltage

Q E R

Y U I

DCR 2020_indice1 1/09/05 15:26 Page 44

Table des matières

Autres manuels Philips Lecteur DVD

Philips

Philips DVP3560K/F8 Manuel utilisateur

Philips

Philips DVP3560K Manuel utilisateur

Philips

Philips DVP3980K Manuel utilisateur

Philips

Philips DVD-722 Manuel utilisateur

Philips

Philips DVP2850 Manuel utilisateur

Philips

Philips DVP2850 Manuel utilisateur

Philips

Philips DVD 623 Manuel utilisateur

Philips

Philips DVP3015K/03 Manuel utilisateur

Philips

Philips DVDR5500/05B Manuel utilisateur

Philips

Philips DVP2880 Manuel utilisateur

Philips

Philips DVP3042/12 Manuel utilisateur

Philips

Philips DVP522 Manuel utilisateur

Philips

Philips DVP3002/93 Manuel utilisateur

Philips

Philips DVP3852K Manuel utilisateur

Philips

Philips PD7006 Fiche d'information produit

Philips

Philips DVDQ40 Manuel utilisateur

Philips

Philips DVP3828 Manuel utilisateur

Philips

Philips DVP3015K/03 Manuel utilisateur

Philips

Philips DVP3600X/77 Manuel utilisateur

Philips

Philips DVDR3305/02 Manuel utilisateur

Philips

Philips DVP3126K Manuel utilisateur

Philips

Philips DVP5100/04 Manuel utilisateur

Philips

Philips DVP3110K/56 Manuel utilisateur

Philips

Philips DVP3500K Manuel utilisateur

Manuels Lecteur DVD populaires d'autres marques

Sony

Sony DVP-F11 Manuel utilisateur

LENCO

LENCO DVP-740 X2 Manuel utilisateur

JVC

JVC XV-N650BEU Manuel utilisateur

Aiwa

Aiwa XD-DV370 Manuel utilisateur

MedeaWiz

MedeaWiz Sprite 4K DV-S4 Manuel utilisateur

Denon

Denon DVM-1805 - DVD Changer Manuel utilisateur

Toshiba

Toshiba SD-3815 Manuel utilisateur

Tevion

Tevion 44330 Manuel utilisateur

Samsung

Samsung DVD-HD860 Manuel utilisateur

Sylvania

Sylvania DP170SL8 Manuel utilisateur

Toshiba

Toshiba SD-P1200 Manuel utilisateur

JVC

JVC XV-D9000E Manuel utilisateur

Dolby Laboratories

Dolby Laboratories CP650 Manuel utilisateur

Denon

Denon DVD-5900 Manuel utilisateur

Sony

Sony DVP-SR201P Manuel utilisateur

Toshiba

Toshiba SD-V394SU Manuel utilisateur

Toshiba

Toshiba SD5300KC Manuel utilisateur

Impecca

Impecca DVHP-9109 Manuel utilisateur