Philips DCM105 Manuel utilisateur
Version 1.3
DCM105
3141 785 34483
Dock for iPod Cube micro music system
-/98/05/12/61
Published by LX 1039 Service Audio Subject to modification
©Copyright 2010 Philips Consumer Electronics B.V. Eindhoven, The Netherlands
All rights reserved. No part of this publication may be reproduced, stored in a retrieval
system or transmitted, in any form or by any means, electronic, mechanical, photocopying,
or otherwise without the prior permission of Philips.
CONTENTS
Technical specification and version variation.................................1-2
Service measurement setup..........................................................1-3
Service aids .................................................................................1-4
Instructions on CD playability ................................................2-1..2-2
Block diagram................................................................................3-1
Wiring diagram...............................................................................4-1
Disassembly diagram............ ........................................................5-1
Main board
Circuit diagram ..................................................................6-1..6-2
Layout diagram..................................................................6-3..6-4
Display/Mcu board
Circuit diagram .........................................................................7-1
Layout diagram..................................................................7-2..7-3
Power ECO/ iPod docking board
Circuit diagram .........................................................................8-1
Layout diagram..................................................................8-2..8-3
Exploded view diagram .................................................................9-1
Mechanical parts list......................................................................9-2
Electrical parts list...............................................................10-1..10-2
Revision list...................................................................................11-1
Tuner
Tuning Range FM: 87.5 - 108 MHz
Tuning Grid 50 KHz
Sensitivity
- Mono, 26 dB S/N
Ratio
< 22 dBf
Search Selectivity < 36 dBu
Total Harmonic
Distortion < 3%
Signal to Noise Ratio > 45 dBu
Speakers
Speaker Impedance 4ohm
Speaker Driver 3.5”
Sensitivity >82dB/m/W
General information
AC power 110 - 127/220-240 V,
50/60 Hz
Operation Power
Consumption 20 W
Standby Power
Consumption < 4 W
Dimensions
- Main Unit
(W x H x D)
- Speaker Box
(W x H x D)
150 x 152 x 250 mm
150 x 152 x 197 mm
Weight
- With Packing
- Main Unit
- Speaker Box
5.07 kg
2.02 kg
2 x 0.895 kg
Rated Output Power 2X5W RMS
Frequency Response 60 - 16kHz, ±3dB
Signal to Noise Ratio >65dB
Aux Input 0.5 V RMS 20kohm
Disc
Laser Type Semiconductor
Disc Diameter 12cm/8cm
Support Disc CD-DA, CD-R,
CD-RW
Audio DAC 24Bits / 44.1kHz
Total Harmonic
Distortion
<1%
Frequency Response 60Hz -16kHz
(44.1kHz)
S/N Ratio >65dBA
TECHNICAL SPECIFICATION
1 - 2
Type /Versions:
Features
Board in used:
DCM105
Service policy
POWER/ECO BOARD
MAIN BOARD
* TIPS : C -- Component Lever Repair.
M -- Module Lever Repair
√
-- Used
Feature diffrence
RDS & DAB
VOLTAGE SELECTOR
ECO STANDBY - DARK
Type /Versions:
/12
05/
VERSION VARIATION
C
√
/05
DIS/MCU BOARD
DCM105
C
C
/12 /98
IPOD BOARD
M/C
M/C
M/C
C
C
/98
√
√
C
C
C
C
√
/61
M/C
M/C
M/C
C
/61
1-3
LF Generator
e.g. PM5110
Recorder
Use Universal Test Cassette CrO2 SBC419 4822 397 30069
LEVEL METER
e.g. Sennheiser UPM550
with FF-filter
S/N and distortion met
e
e.g. Sound Technology ST170
L
R
DUT
or Universal Test Cassette Fe SBC420 4822 397 30071
LEVEL METER
e.g. Sennheiser UPM550
with FF
-
filter
S/N and distortion meter
e.g. Sound Technology ST1700B
L
R
DUT
CD
Use Audio Signal Disc
(replaces test disc 3)
SBC429 4822 397 30184
Bandpass
250Hz-15kHz
e.g. 7122 707 48001
LF Voltmeter
e.g. PM2534
DUT
S/N and distortion meter
e.g. Sound Technology ST1700B
Frame aerial
e.g. 7122 707 89001
Tuner AM (MW,LW)
To avoid atmospheric interference all AM-measurements have to be carried out in a Faraday´s cage.
Use a bandpass filter (or at least a high pass filter with 250Hz) to eliminate hum (50Hz, 100Hz).
RF Generator
e.g. PM5326
Ri=50:
Bandpass
250Hz-15kHz
e.g. 7122 707 48001
LF Voltmeter
e.g. PM2534
DUT
RF Generator
e.g. PM5326
S/N and distortion meter
e.g. Sound Technology ST1700B
Use a bandpass filter to eliminate hum (50Hz, 100Hz) and disturbance from the pilottone (19kHz, 38kHz).
Ri=50:
Tuner FM
MEASUREMENT SETUP
1-4
SERVICE AIDS
GB WARNING
All ICs and many other semi-conductors are
susceptible to electrostatic discharges (ESD).
Careless handling during repair can reduce life
drastically.
When repairing, make sure that you are
connected with the same potential as the mass
of the set via a wrist wrap with resistance.
Keep components and tools also at this
potential.
ESD
CLASS 1
LASER PRODUCT
GB
Safety regulations require that the set be restored to its original
condition and that parts which are identical with those specified,
be used
Safety components are marked by the symbol !.
Lead free
Set remains closed!
N
Y
Play a CD
for at least 10 minutes
Y
playability
ok ?
N
playability
ok ?
add Info for customer
"SET OK"
check playability
N
Y
playability
ok ?
check playability
check playability
return set
Customer complaint
"CD related problem"
"fast" lens cleaning
1
2
3For flap loaders (= access to CD drive possible)
cleaning method 4is recommended
INSTRUCTIONS ON CD PLAYABILITY
2 - 1
Exchange CDM
1-4For description - see following pages
1
PLAYABILITY CHECK
For sets which are compatible with CD-RW discs
use CD-RW Printed Audio Disc....................7104 099 96611
TR 3 (Fingerprint)
TR 8 (600µ Black dot) maximum at 01:00
• playback of these two tracks without audible disturbance
playing time for: Fingerprint 10seconds
Black dot from 00:50 to 01:10
• jump forward/backward (search) within a reasonable time
For all other sets
use CD-DA SBC 444A..................................4822 397 30245
TR 14 (600µ Black dot) maximum at 01:15
TR 19 (Fingerprint)
TR 10 (1000µ wedge)
• playback of all these tracks without audible disturbance
playing time for: 1000µ wedge 10seconds
Fingerprint 10seconds
Black dot from 01:05 to 01:25
• jump forward/backward (search) within a reasonable time
2
CUSTOMER INFORMATION
It is proposed to add an addendum sheet to the set which
informs the customer that the set has been checked
carefully - but no fault was found.
The problem was obviously caused by a scratched, dirty or
copy-protected CD. In case problems remain, the customer
is requested to contact the workshop directly.
The lens cleaning (method 3) should be mentioned in the
addendum sheet.
The final wording in national language as well as the printing
is under responsibility of the Regional Service Organizations.
4
LIQUID LENS CLEANING
Because the material of the lens is synthetic and coated
with a special anti-reflectivity layer, cleaning must be done
with a non-aggressive cleaning fluid. It is advised to use
“Cleaning Solvent
The actuator is a very precise mechanical component and
may not be damaged in order to guarantee its full function.
Clean the lens gently (don’t press too hard) with a soft and
clean cotton bud moistened with the special lens cleaner.
The direction of cleaning must be in the way as indicated in
the picture below.
Before touching the lens it is advised to clean the
surface of the lens by blowing clean air over it.
This to avoid that little particles make scratches on
the lens.
INSTRUCTIONS ON CD PLAYABILITY
2 - 2
SET BLOCK DIAGRAM
3 - 1 3 - 1
ECO POWER BOARD
MAIN BOARD
DISPLAY MCU
BOARD
SET WIRING DIAGRAM
4 - 1 4- 1
ECO+POWER BOARD
DISPLAY/MCU BOARD
MAIN BOARD
iPod DOCKING BOARD
SPEAKERS JACK
CON12
CON105
CON102
CON4 CON107
CN3
CON9
J3
CON7
CON2
J2
CON6
CON11
CON3
CN6
CON1
FM-ANT IN
H2
CD DOOR SWITCH
5-1 5-1
DISASSEMBLY DIAGRAM
BOTTOM CAB.
Dismantling of the Bottom Cabinet
Dismantling of the Front Cabinet and PCB Board.
1)Remove 2 screws E as indicated to loosen the Front Cabinet.
2)Remove 9 screws F as indicated to loosen the Front Board.
3)Remove 2 screw G as indicated to loosen the Main Board.
A
B
E
F
G
C
D
1)Remove 2 screws A as indicated.
2)Remove 2 screws B as indicated to loosen the Speaker Socket Board.
3)Remove 2 foot rubbers first and then remove 2 screws C as indicated.
4)Remove 4 screws D as indicated to loosen the Bottom Cabinet.
CIRCUIT DIAGRAM-MAIN BOARD
PART 1
6-1 6-1
Autres manuels pour DCM105
1
Ce manuel convient aux modèles suivants
4
Table des matières
Autres manuels Philips Station d'accueil
Philips
Philips DC291/98 Manuel utilisateur
Philips
Philips SGP6031BB/27 Manuel utilisateur
Philips
Philips Fidelio AD7000W Manuel utilisateur
Philips
Philips DCM230 Manuel utilisateur
Philips
Philips DCB291/12 Manuel utilisateur
Philips
Philips DCB242 Manuel utilisateur
Philips
Philips DC315 - Docking Entertainment System Clock... Manuel utilisateur
Philips
Philips DC190 Manuel utilisateur
Philips
Philips DC910W/37 Manuel utilisateur
Philips
Philips AJ5350D Manuel utilisateur
Philips
Philips ORD2105B Manuel utilisateur
Philips
Philips DC6210/37 Manuel utilisateur
Philips
Philips LFH 9160 Manuel utilisateur
Philips
Philips AZD1755 Manuel utilisateur
Philips
Philips DC-390 Manuel utilisateur
Philips
Philips DCM230/55 Manuel utilisateur
Philips
Philips DC315 - Docking Entertainment System Clock... Manuel utilisateur
Philips
Philips Fidelio AS351 Manuel utilisateur
Philips
Philips DC290/05 Manuel utilisateur
Philips
Philips DC200/05 Manuel utilisateur
