Philips DS3600/12 Manuel utilisateur

www.philips.com/welcome

DS3600

EN User manual

2EN

Contents

1 Important 3

2 Your Docking Speaker 4

Introduction 4

What’s in the box 4

Overview of the main unit 5

Overview of the remote control 6

3 Get started 6

Prepare the remote control 6

Connect power 6

Turn on 7

4 Play 7

Play from iPod/iPhone/iPad 7

Play from Bluetooth deivces 9

Play from an external audio device 10

Adjust volume 10

Mute sound 10

  

 

Bluetooth 11

General information 11

6 Troubleshooting 11

About Bluetooth device 12

7 Notice 12

3EN

1 Important

 Read these instructions.

 Heed all warnings.

 Follow all instructions.

 Do not use this apparatus near water.

 Do not block any ventilation openings.

Install in accordance with the

manufacturer’s instructions.

 Do not install near any heat sources such

as radiators, heat registers, stoves, or



produce heat.

 Protect the power cord from being

walked on or pinched, particularly at plugs,

convenience receptacles, and the point

where they exit from the apparatus.

 

by the manufacturer.

 Unplug this apparatus during lightning

storms or when unused for long periods

of time.

 

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as power-supply cord or plug

is damaged, liquid has been spilled or

objects have fallen into the apparatus, the

apparatus has been exposed to rain or

moisture, does not operate normally, or

has been dropped.

 Keep the battery away from heat, sunshine



 Replace the battery with the same or

equivalent type only.

 The battery contains chemical substances,

so it should be disposed of properly.

 The button cell battery cannot be

swallowed. Keep children away from the

battery.

 Apparatus shall not be exposed to

dripping or splashing.

 Do not place any sources of danger on the





 The USB socket is for data transmission

only.

 Where the plug of the Direct Plug-in

Adapter is used as the disconnect device,

the disconnect device shall remain readily

operable.

Warning

 

 

equipment.

 Ensure that you always have easy access to the power

cord, plug or adaptor to disconnect the apparatus from

the power.

4EN

2 Your Docking

Speaker

Congratulations on your purchase, and



support that Philips offers, register your product

at www.philips.com/welcome.

If you contact Philips, you will be asked for the

model and serial number of this apparatus.The

model number and serial number are on the

bottom of the apparatus.Write the numbers

here:





Introduction

With this docking speaker, you can

 enjoy audio from the iPod/iPhone/iPad,

Bluetooth devices and other external

audio devices; and

 synchronize the iPod/iPhone/iPad with your

computer through USB socket.

What’s in the box

Check and identify the contents of your

package:

 Main unit

 

 1 x AC power adaptor

 Quick start guide

 Safety sheet

5EN

Overview of the main unit

a Dock for the iPod/iPhone/iPad

b /

 Adjust volume.

 As LED indicators, show system status.

 Select Bluetooth mode.

 Turn the docking speaker on.

 Switch to standby mode.

d Power supply socket

 Connect AC power.

 Sync with PC through a USB cable.

f MP3-LINK

 Connect an external audio device.

6EN

Overview of the remote

control

 Select iPod/iPhone/iPad mode.

b /

 Skip to a track.

 Search within play.

 Mute volume.

 Start or pause play.

e /

 Adjust volume.

 Select MP3 link mode.

3 Get started

Always follow the instructions in this chapter in

sequence.

Prepare the remote control



Remove the protective tab to activate the

remote control battery.



1 Open the battery tray.

2 Insert one CR2025 battery with correct



3 Close the battery tray.

Connect power

Caution

 Risk of product damage! Make sure that the power

supply voltage matches the voltage printed on the

bottom of the docking speaker.

 Risk of electric shock! When you unplug the AC



pull the cord.

Note

 The type plate is located at the back of the docking

speaker.

CR2025

7EN

Connect the AC power adaptor to:

 the DC IN socket at the back of the

docking speaker.

 the wall outlet.

Turn on

Press and hold on the main unit for 2 seconds.

» The / LED indicators light up.

Switch to standby mode

In the following situation, the docking speaker

switches to standby mode:

 Press and hold for 2 seconds again; or

 The system is idle for 15 minutes.

» In standby mode, the LED indicators light

off.

Note

 In standby mode, if you press on the main unit or

/ on the remote control, the docking speaker

switches to the corresponding selected source.

4 Play

Play from iPod/iPhone/iPad

You can enjoy audio from iPod/iPhone/iPad

through this docking speaker.

Compatible iPod/iPhone/iPad

The docking speaker supports the following

iPod/iPhone/iPad models:

Made for.

 iPod touch (1st, 2nd, 3rd, and 4th



 iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th



 iPhone 4S

 iPhone 4

 iPhone 3GS

 iPhone 3G

 iPhone

 iPad 2

 iPad

Listen to the iPod/iPhone/iPad

Philips DockStudio app brings a suite of new

features to your docking speaker.To enjoy more

features, you are recommended to install this

free application.

1 Insert your iPod/iPhone/iPad into the dock.

» The docking system switches to Dock

source automatically.

» The orange LED indicators light up.

8EN

2 

install DockStudio app on your iPod/

iPhone/iPad.

3 Tap [Yes] 

request.

4 Follow the on-screen instructions to

complete the installation.

5 Launch the app after the installation.

6 Play audio on your iPod/iPhone/iPad.

» Audio comes out through this docking

speaker.

Tip

 You can press to select Dock source.

 With the DockStudio app, you can enjoy music, set



and so on.

 To pause or resume play, press .

 To skip to a track, press / .

 To search during play, press and hold / ,

then release to resume normal play.



DockStudio

app will search for it automatically and ask you

to download it.

Note

 Make sure that your iPod/iPhone/iPad is inserted in the

docking speaker and connected to the Internet.

1 OK.

2 Follow the on-screen instructions to



9EN

Note

 Do not disconnect power or undock the iPod/iPhone/

iPad during the updating process.

Charge the iPod/iPhone/iPad

When the docking speaker is connected to

power, the docked iPod/iPhone/iPad begins to

charge automatically.

Sync iPod/iPhone/iPad with PC

Note

 

in your PC.

1 Insert the iPod/iPhone/iPad in the dock.

2 Press and hold for 2 seconds to switch

the docking speaker to standby mode.

» The LED indicators light off.

3 Connect your docking speaker and PC

with a USB cable.

4 Launch iTunes to synchronize your docking

speaker with PC.

» The docked iPod/iPhone/iPad is

synchronized with PC successfully

through the iTunes.

Note

 Due to different materials and product techniques,

some USB cables may not work with this device.

Play from Bluetooth deivces

Note

 Before you connect a Bluetooth device to this docking

speaker, familiarize yourself with the Bluetooth

capabilities of the device.

 Keep this docking speaker away from other electronic

devices that may cause interference.

 The effective operation range between the docking

speaker and the paired device is approximately 10



 Any obstacle between the speaker and the device can

reduce the operational range.

1 Press to select Bluetooth source.

» 

slowly.

2 Turn on Bluetooth function on your device.

 Different devices may have different

way to activate Bluetooth.

10EN

3 Scan Bluetooth devices that can pair with

your device.

4 When “PHILIPS DS3600” is displayed on

your device, select it to start connection.

» 

heard and the Bluetooth indicator light

up stably if connection is successful.

5 Play music in your device.

» Music comes through the docking

speaker.

Tip

 If your Bluetooth device has been paired with DS3600







 Press on the docking speaker again, or

 Deactivate Bluetooth function on

your device or move it beyond the

communication range.

Play from an external audio

device

1 If no iPod/iPhone/iPad is docked, connect



 the MP3-LINK socket at the back of

the docking speaker.

 the headphone socket on an external

device.

2 Play music on the device (see the device’s



Tip

 You can select MP3 link source by pressing on the

remote control.

Adjust volume

!"

 Press +/- on your docking speaker; or

 Adjust the volume control of your iPod/

iPhone/iPad, Bluetooth device, or other

external device.

Mute sound

During play, press to mute or unmute sound.

Autres manuels pour DS3600/12

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Philips Station d'accueil pour haut-parleurs

Philips

Philips AD712/12 Manuel utilisateur

Philips

Philips DS8530/37 Manuel utilisateur

Philips

Philips SBD6020 Manuel utilisateur

Philips

Philips DS9800W/10 Manuel utilisateur

Philips

Philips AS111/12 Manuel utilisateur

Philips

Philips DS1155 Fiche d'information produit

Philips

Philips DS6100/37 Manuel utilisateur

Philips

Philips DS1150/12 Manuel utilisateur

Philips

Philips DS7880/37 Manuel utilisateur

Philips

Philips Fidelio DS1200 Manuel utilisateur

Philips

Philips DCM129/12 Manuel utilisateur

Philips

Philips DS8530/37 Manuel utilisateur

Philips

Philips DS7600/05 Manuel utilisateur

Philips

Philips DCB210 Manuel utilisateur

Philips

Philips AD530/05 Manuel utilisateur

Philips

Philips DS6600/37 Manuel utilisateur

Philips

Philips AD305 Manuel utilisateur

Philips

Philips DS3500/37 Manuel utilisateur

Philips

Philips AS111 Manuel utilisateur

Philips

Philips DCB242 Manuel utilisateur

Philips

Philips DS6200/10 Manuel utilisateur

Philips

Philips DS1600/77 Manuel utilisateur

Philips

Philips AD300/12 Manuel utilisateur

Philips

Philips AD330/37 Manuel utilisateur

Manuels Station d'accueil pour haut-parleurs populaires d'autres marques

LG PA36 Manuel utilisateur

PURE

PURE Contour Manuel utilisateur

LG ND8520 Manuel utilisateur

Maxell

Maxell BT3100 Manuel utilisateur

Boston

Boston i-DS3 plus Manuel utilisateur

aqprox!

aqprox! APPSP06X Manuel utilisateur

iLive

iLive ISD291B Manuel utilisateur

JBL

JBL on stager III WM Manuel utilisateur

JAMO

JAMO i200 FM Manuel utilisateur

AUVIO

AUVIO Auvio 40-294 Manuel utilisateur

Insignia

Insignia NS-IPSD1 Guide de démarrage rapide

Pioneer

Pioneer XW-NAS3 Manuel utilisateur

Amethyst

Amethyst A9 iExecutive Manuel utilisateur

Memorex

Memorex Mi2032 - Portable Speakers With Digital Player... Manuel utilisateur

Dok

Dok CR11 Manuel utilisateur

LENCO

LENCO IPD-4100/2 Series Manuel utilisateur

LG ND5520 Manuel utilisateur

Boston

Boston i-DS3 plus Manuel utilisateur