Philips D150 Manuel utilisateur
D150
Register your product and get support at
www.philips.com/welcome
User manual
Important safety
instructions
Warning
•The Electrical network is classified as hazardous.
The only way to power down the charger is to
unplug the power supply from the electrical outlet.
Ensure that the electrical outlet is always easily
accessible.
•Refer to safety information before using the
product.
•This product complies with European R&TTE
directive 1999/5/EC
•Use only the power supply listed in the user
instructions.
•Use only the batteries listed in the user
instructions.
•Do not allow the product to come into contact
with liquids.
•Risk of explosion if battery is replaced by an
incorrect type.
•Dispose of used batteries according to the
instrucions.
•When the handset rings or when the handsfree is
activated, keep the handset away from your ear to
avoid hearing damage.
1Overview
Display icons
It displays the connection between the handset
and the base.The more the bars are shown, the
better the connection is.
It remains steadily on when browsing incoming
calls in the call log.
It indicates an outgoing call in the redial list.
Itasheswhenthereisanewmissedcallor
when browsing new missed calls. It remains
steadily on when browsing the missed calls in
call log that are already read.
Itasheswhenreceivingincomingcall.Itremains
steadily on during a call.
The ringer is off.
Voicemessagesindicator:ashesfornew
messages, is steady for reviewed messages.
* This is network dependent
It displays when you scroll up/down a list or
increase and decrease the volume.
There are more digits on the right. Press to
read.
In call
Phonebook
Adjust the volume
End calls
Mute/unmute the
microphone
Enter a pause
Recall key
(network
dependent)
Standby
Access the main
menu
Phonebook
Call log
Make and receive
calls
Make intercom call
Lock/unlock the
keypad
In menu
Conrm/Enter
the option menu /
Select
Cancel
Up / down
Exit menu
In text input
Delete text
Enter a space
Microphone
Earpiece
/
/
Find handset
Display icons
1 2 3
2Connect
Multi-handset version
only.
3Get started
Insert batteries Charge your phone
Charge 8 hours
Congure your phone
1 Whenusingyourphoneforthersttime,youseea
welcome message (country dependent).
2 Set the country and language if prompted.
3 Set the date and time.
•If the time is in 12-hour format, press / key to
select [am] or [pm] (country dependent).
> 70%
40% - 70%
10% - 40%
< 10%
Flashing: low battery
Scrolling: charging in progress
4Enjoy
Phonebook
Add record
1 Press .
2 Select [phonebook] > [add new].
3 Follow on-screen instructions.
Call from the phonebook
1 Press .
2 Select a record and press .
Direct access memory
You have 2 direct access memories (Keys 1 and 2).
To dial the saved phone number automatically, press
and hold on the keys in standby mode.
Depending on your country, keys 1 and 2 are preset
to [1_voicemail] (voice mail number) and
[2_info svc] (information service number)
of your network operator respectively (network
dependent).
Call log
Call from the call log
1 Press .
2 Select a record and press .
Add record
1 Press > > [save number].
2 Follow on-screen instructions.
Delete record
1 Press > > [delete].
2 Follow on-screen instructions.
Redial list
Call from the redial list
1 Press .
2 Select a record and press .
Add record
1 Press > > [save number].
2 Follow on-screen instructions.
Delete record
1 Press > > [delete].
2 Follow on-screen instructions.
Register additional handsets
You can register additional handsets to the base station.
1 Press and hold on the base station for 5 seconds.
2 Press .
3 Select [services] > [register], then press
toconrm.
4 Enter the system PIN/passcode (0000).
5 Press toconrmthePIN/passcode.
» Registration is complete in less than 2 minutes.
Restore default settings
You can reset your phone settings to the original
factory settings.
1 Press .
2 Select [services] > [reset], then press
toconrm.
3 Follow on-screen instructions.
Note
•You may recall the original PIN/Passcode by
following this procedure.
Technical data
Battery
•Philips: 2 x AAA NiMH 1.2 V Rechargeable
550 mAh batteries
Use only the supplied batteries.
Adapter
Phonebook with 50 entries
Call log with 20 entries
Talk time: 16 hours
Standby time: 250 hours
Note
•YoucaninstallaDSL(digitalsubscriberline)lter
to prevent noise and caller ID problems caused by
the DSL interference.
•YoucanndtheDeclarationofConformityon
www.p4c.philips.com.
Frequently asked questions
No signal bar is displayed on the screen.
•The handset is out of range. Move it closer to the
base station.
•If the handset displays [unregistered],
register your handset.
If I fail to pair (register) the additional handsets to
the base station, what do I do?
Your base memory is full. Access >
[services] > [unregister] to unregister
the unused handsets and try again.
My handset is in searching status, what do I do?
•Make sure that the base station has power supply.
•Register the handset to the base station.
•Move the handset closer to the base station.
I cannot change the settings of my voice mail, what
do I do?
The voice mail service is managed by your service
provider but not the phone itself. Contact your
service provider to change the settings.
No display
•Make sure the batteries are charged.
•Make sure there are power and phone
connections.
The handset on the charger does not charge.
•Make sure the batteries are inserted correctly.
•Make sure the handset is placed properly on the
charger.The battery icon animates when charging.
•Make sure the docking tone setting is turned on.
When the handset is placed correctly on the
charger, you can hear a docking tone.
•The charging contacts are dirty. Disconnect the
powersupplyrstandcleanthecontactswitha
damp cloth.
•Purchasenewoneswiththesamespecications.
Bad audio (crackles, echo, etc.)
•The handset is nearly out of range. Move it closer
to the base station.
•The phone receives interference from the nearby
electrical appliances. Move the base station away
from them.
•The phone is at a location with thick walls. Move
the base away from them.
The handset does not ring.
Make sure the handset ringtone is turned on.
The caller ID does not display.
•The service is not activated. Check with your
service provider.
•The caller’s information is withheld or unavailable.
www.philips.com/support
For information, refer to the extended user
documentation online.
Autres manuels pour D150
2
Table des matières
Autres manuels Philips Téléphone sans fil
Philips
Philips CD4552B Manuel utilisateur
Philips
Philips S10 Manuel utilisateur
Philips
Philips DECT5150S/00 Manuel utilisateur
Philips
Philips CD6452B/37 Manuel utilisateur
Philips
Philips DECT5113L Manuel utilisateur
Philips
Philips CD 245 Manuel utilisateur
Philips
Philips CD3652S/90 Manuel utilisateur
Philips
Philips CD1901WR Manuel utilisateur
Philips
Philips D1211B Manuel de l'opérateur
Philips
Philips SE7401B/51 Manuel utilisateur
Philips
Philips D200 Fiche d'information produit
Philips
Philips SE2752B/51 Manuel utilisateur
Philips
Philips SE4353S Manuel utilisateur
Philips
Philips SE1711B/90 Manuel utilisateur
Philips
Philips CD360 Manuel utilisateur
Philips
Philips CD2752S/90 Manuel utilisateur
Philips
Philips CD1504B Manuel utilisateur
Philips
Philips CD5301S/73 Manuel utilisateur
Philips
Philips SE735 Manuel utilisateur
Philips
Philips CD1551B/37 Guide de l'utilisateur
