Philips AVENT SCF355 Manuel utilisateur

www.philips.com/avent

Philips Consumer Lifestyle BV

Tussendiepen 4, 9206 AD Drachten, Netherlands

Philips Personal Health

A division of Philips North America LLC,

P.O. Box 10313, Stamford, CT 06904, USA

Trademarks owned by the Philips Group.

Les marques de commerce sont la propriété du Groupe Philips.

SCF355

www.philips.com 4213 342 20547

User manual

2 3 4 5

67 8 9

10 11 12 13

14 15 16

SCF355

ENGLISH 6

ESPAÑOL MÉXICO 17

FRANÇAIS CANADA 30

General description (Fig. 1)

1. Bottle warmer

2. Light

3. Settings knob

4. O setting

5. Defrost setting

6. Keep warm setting

7. Express milk warming setting for contents up to

180ml/6oz

8. Food warming setting

9. Express milk warming setting for contents over and

including 180ml/6oz

IMPORTANT

SAFEGUARDS

When using electrical appliances, basic safety precautions

should always be followed including the following:

Danger

- To protect against re, electric shock and injury to persons

do not immerse the cord, plug or appliance in water or

other liquid.

Warning

- Read all instructions.

- Do not use outdoors.

- Do not let cord hang over the edge of table or counter, or

touch hot surfaces. Excess cord can be stored in the base

of the bottle warmer.

- This appliance has a polarized plug (one blade is wider

than the other). To reduce the risk of electric shock, this

ENGLISH

plug is intended to t into a polarized outlet only one way.

If the plug does not t fully into the outlet, reverse the

plug. If it still does not t, contact a qualied electrician.

Do not attempt to modify the plug in any way.

- Check if the voltage indicated on the appliance

corresponds to the local mains voltage before you

connect the appliance.

- A short power-supply cord should be used to reduce the

risk resulting from becoming entangled in or tripping over a

longer cord. Extension cords are available and may be used

if care is exercised in their use. If an extension cord is used,

the marked electrical rating of the extension cord should

be at least 13 amperes and the cord should be arranged

so that it will not drape over the countertop or tabletop

where it can be pulled on by children or tripped over

unintentionally.

- Do not operate any appliance with a damaged cord or

plug or after the appliance malfunctions, or has been

damaged in any manner. Return appliance to the nearest

authorized service facility for examination, repair or

adjustment.

- The use of accessory attachments not recommended by

the appliance manufacturer may cause injuries.

- Do not place the appliance on or near a hot gas or electric

burner, or in a heated oven.

- Close supervision is necessary when any appliance is used

by or near children.

- This appliance is not intended for use by persons

(including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction

concerning use of the appliance by a person responsible

for their safety.

- Children should be supervised to ensure that they do not

play with the appliance.

ENGLISH

- Keep the appliance and its cord out of the reach of

children.

- Do not spill water on the appliance plug.

- Only use the appliance as described in the user manual to

avoid potential injury due to misuse.

- Do not preheat the appliance.

- Always place a fully assembled bottle with cap in the

bottle warmer before you add water.

- Make sure you add water before you switch on the bottle

warmer.

- Hot water can cause serious burns. Be careful when the

bottle warmer contains hot water.

- Extreme caution must be used when moving an appliance

containing hot oil or other hot liquids.

- Do not touch hot surfaces. Use handles or knobs. The

accessible surfaces may become hot during use.

- Do not move the appliance when it contains hot water.

- When the food or milk has reached the required

temperature, remove the bottle or container from the

bottle warmer. If you leave food or milk in the bottle

warmer, the temperature of the food or milk increases.

- Before serving be sure the food is at safe temperature.

- Before serving, unplug the cord from the wall outlet and

dish. Do not leave the cord within child’s reach.

- Always turn the knob to “o” before you remove the plug

from the wall outlet.

Caution

- This appliance is intended to be used in household and

similar applications such as farm houses, bed and breakfast

type environments, sta kitchen areas in shops, oces

and other working environments, and by clients in hotels,

motels and other residential type environments.

- Unplug from outlet when not in use and before cleaning.

Allow to cool before putting on or taking o parts, and

before cleaning the appliance.

ENGLISH

- The surface of the heating element is subject to residual

heat after use.

- Follow the descaling instructions to avoid irreparable

damage.

- Do not try to open or repair the appliance yourself. You

can contact the Philips Consumer Care Centre in your

country (see www.philips.com/support).

- Do not use appliance for other than intended use.

SAVE THESE

INSTRUCTIONS

You can nd the production date code in the cord storage

compartment in the base of the bottle warmer.

Using the bottle warmer

With this bottle warmer, you can quickly warm Philips Avent

feeding bottles and milk/baby food in containers and other

baby food jars.

Note: Philips Avent breast milk bags and Philips Avent

2oz/60ml bottles cannot be used in this bottle warmer.

Explanation of settings

O setting: The bottle warmer is switched o and the light

is o. On every other setting, the appliance is switched on

and the light is lit (Fig. 2).

Express milk warming setting for contents up to 180ml/6oz:

Select this setting when you want to quickly warm a bottle of

milk with a content up to 180ml/6oz.

The bottle has to be taken out immediately after warming to

the right temperature, otherwise the milk will be overheated.

- Food warming setting: Select this setting when you want

to warm a container/jar of baby food.

ENGLISH

- Express milk warming setting for contents over and

including 180ml/6oz:

Select this setting when you want to quickly warm a bottle

of milk with a content over and including 180ml/6oz.

The bottle needs to be taken out immediately after

warming to the right temperature, otherwise the milk will be

overheated.

- Keep warm setting: Milk is warmed at a slower speed and

be kept at right temperature.

- Defrost setting: Defrost a bottle/container of milk/baby

food to liquid state. No warming occurs.

Using the bottle warmer with express milk warming

setting

1 Put the appliance plug in the wall outlet (Fig. 3).

2Place a bottle in the bottle warmer (Fig. 4).

3Fill the bottle warmer with drinking water up to the level

of the milk in the bottle. In case of large amounts of milk,

the maximum level of water is approximately 1 cm below

the top of the bottle warmer. An accurate water level

ensures correct warming performance (Fig. 5).

4Select the desired setting based on the milk volume. See

the express warming reference table at the end of this

chapter to check how long the milk needs to be warmed

in the selected setting (Fig. 6).

Note: The speed of warming milk depends on the amount of

the milk warmed and on its initial temperature, i.e. room

temperature (70°F/20°C) or fridge temperature (40°F/5°C).

5The orange light goes on when you select a setting. This

indicates that the bottle warmer is on (Fig. 7).

Note: While warming the milk circulates and heats evenly.

6Check the express warming reference table for the time

required to warm the milk. Remove the bottle from the

ENGLISH

bottle warmer after the time indicated in the express

warming reference table has passed (Fig. 8).

Tip: When you find the milk is not warm enough, you can

place the bottle back into the appliance for a maximum of

30 seconds of extra warming. This will create a slightly

warmer result but without overheating.

Caution: If you leave the bottle in the bottle warmer longer

than the time indicated in the settings table, the milk may

become overheated.

Note: If you overheat breast milk, valuable nutrients and

vitamins may be lost.

7 Always check the temperature before you feed your baby.

Gently shake the bottle or milk storage container and check

the temperature of the milk by sprinkling a few drops on the

inside of your wrist (Fig. 9).

8 Turn the knob back to the ‘o’ position (Fig. 10).

Caution: If you do not turn the knob back to the ‘o’ position,

the water keeps warming.

Express warming reference table

ml/oz min min

5°C/40°F 20°C/70°F

60 ml/2 oz-90 ml/3 oz 4.5 3.0

90 ml/3 oz-110 ml/3.7 oz 5.5 3.0

125 ml/4 oz-150 ml/5 oz 3.5 3.0

180 ml/6 oz-210 ml/7 oz 5.5 4.0

240 ml/8 oz-260 ml/9 oz 7.0 4.5

290 ml/10 oz-330 ml/11 oz 7.5 5.0

ENGLISH

Note: The indicated warming times are based on Philips

Avent Classic and Natural PP bottle ranges. Be aware that

warming timings of Philips Avent standard bottles and

glass bottles deviate from these indications. The

characteristics of bottles such as material or thickness may

also impact the warming times, therefore it may take less time

to warm a larger volume of milk.

Note: The milk may feel cool to you, but for a newborn baby

its temperature is very pleasant.

Using the bottle warmer to warm baby food

1 Follow the same steps as indicated in the previous

paragraph.

2 Make sure to stir the baby food during warming as it does

not circulate automatically. Be careful not to burn your

ngers when holding the container/jar while stirring

(Fig. 11).

After warming test the baby food with a spoon to ensure it is

not too hot. If the baby food is not warm enough, put the

container back into the bottle warmer and warm the baby food

until it has the desired temperature.

Note: Due to the high variety of baby food consistencies, it

is not possible to indicate warming timings for baby food.

Therefore, it is strongly recommended to continuously stir

and check while you are warming the baby food for an

optimal result.

Using the keep warm setting to warm milk

1Put the appliance plug in the wall outlet (Fig. 3).

2Place the bottle or container in the bottle warmer (Fig. 4).

3 Fill the bottle warmer with drinking water up to the

level of the milk in the bottle/container. In case of

large amounts of milk, the maximum level of water

is approximately 1 cm below the top of the bottle

warmer (Fig. 5).

ENGLISH

Autres manuels pour SCF355

Table des matières

Langues :

Autres manuels Philips AVENT Chauffe-biberon

Philips AVENT

Philips AVENT iQ SCF260/22 Manuel utilisateur

Philips AVENT

Philips AVENT Naturally Express SCF255/11 Manuel utilisateur

Philips AVENT

Philips AVENT Avent SCF260/34 Manuel utilisateur

Philips AVENT

Philips AVENT Avent SCF260/15 Manuel utilisateur

Philips AVENT

Philips AVENT SCF260/35 Manuel utilisateur

Philips AVENT

Philips AVENT SCF355 Manuel utilisateur

Philips AVENT

Philips AVENT SCF260/37 Manuel utilisateur

Philips AVENT

Philips AVENT SCF255/60 Manuel utilisateur

Philips AVENT

Philips AVENT Electric Bottle and Baby Food Warmer Manuel utilisateur

Philips AVENT

Philips AVENT SCF260/33 Manuel utilisateur

Philips AVENT

Philips AVENT SCF260/23 Manuel utilisateur

Philips AVENT

Philips AVENT SCF260/37 Manuel utilisateur

Philips AVENT

Philips AVENT SCF355 Manuel utilisateur

Philips AVENT

Philips AVENT SCF255/54 Manuel utilisateur

Philips AVENT

Philips AVENT SCF355 Manuel utilisateur

Philips AVENT

Philips AVENT SCF255/55 Manuel utilisateur

Philips AVENT

Philips AVENT SCF255/57 Manuel utilisateur

Philips AVENT

Philips AVENT Naturally Express SCF255/11 Manuel utilisateur

Philips AVENT

Philips AVENT SCF255/53 Manuel utilisateur

Philips AVENT

Philips AVENT SCF355 Manuel utilisateur

Philips AVENT

Philips AVENT SCF355 Manuel utilisateur

Philips AVENT

Philips AVENT Avent SCF260/34 Manuel utilisateur

Philips AVENT

Philips AVENT EXPRESS IQ STEAM STERILISER Manuel utilisateur

Philips AVENT

Philips AVENT AVENT iQ SCF260/32 Manuel utilisateur

Manuels Chauffe-biberon populaires d'autres marques

Topcom

Topcom KD-4302 Manuel utilisateur

SEVERIN

SEVERIN BK-3177 Manuel utilisateur

Philips

Philips SCF355 Manuel utilisateur

SEVERIN

SEVERIN BK 3176 Manuel utilisateur

Chicco

Chicco 06867 MU Manuel utilisateur

Reer

Reer Multimax 2 in 1 -travel Manuel utilisateur

Lionelo

Lionelo Thermup Go Manuel utilisateur

TEFAL

TEFAL Disney Baby TD1100K0 Manuel utilisateur

TrueLife

TrueLife INVIO BW Single Manuel utilisateur

Gourmia

Gourmia JBW-250 Manuel utilisateur

König Electronic

König Electronic HC-BW10 Manuel utilisateur

Gourmia

Gourmia JBW-150 Manuel utilisateur

NUK

NUK MEDICPRO 10.256.467 Manuel utilisateur

Petra

Petra DI 6.00 Manuel utilisateur

babymoov

babymoov Auto Speed Bib Manuel utilisateur

Alecto

Alecto BW600 Manuel utilisateur

Lionelo

Lionelo Thermup Manuel utilisateur

Vinotemp

Vinotemp VT-Chiller Manuel utilisateur