Phil & Teds Evolution BS01-B Manuel utilisateur
evolution
Group 0+I (0-25kg)
™
The product has been approved according to the strictest
European safety standards (ECE R 44/04) and is suitable
for Group 0+I+11(0-25KG).
SUITABLE FOR
BS01-B/S
BS01-BE/SE
BS01-BC/SC
BS01-BCE/SCE
Please register your purchase through our online warranty registration
by visiting: www.philandteds.com/register
For rights & remedies, refer www.philandteds.com/warranty
The evolution™complies with requirements applicable in market
of sale
philandteds.com
Introduction
Dear parents
Thank you very much for purchasing our product.
The function and design of this seat delivers the highest
levels of safety and comfort when your child is in this child
restraint.
In order to achieve the best function, please adjust the
child restraint to be suitable for your child’s stature and
weight before using our product.
Research shows that a high number of car safety seats
are incorrectly installed. Therefore, please take the time to
read through the instruction manual carefully. Our product
offers maximum safety only when it is used in accordance
with the instructions.
Continuous research by our development team, user tests
and consumer reactions ensure that we are kept fully up to
date in the field of child safety. Therefore, if you have any
questions concerning the use of the our product, please do
not hesitate to contact us.
You can see our contact information in the service card.
Content
Introduction 2
Important 3-4
Know your car seat 5-6
1. Suitability 7
1.1 Certification 7
2. Use in the vehicle 8-9
2.1 Use in the vehicle 8
2.2 With the vehicle's 3-point seatbelt 9
3. Securing your baby 10-14
3.1 Securing your baby using the baby insert 10
3.2 Five positions of the car seat 11
3.3 How to adjust the belts, headrest and seat
positions 11-12
3.4 Securing your baby using the harness 13
3.5 Tightening the harness 14
3.6 Checklist to ensure that your baby is buckle
up correctly 14
3.7 Removing the CuddleMe Baby Insert for
children over 5.5 kg 14
4. Installation in the vehicle 15-18
4.1 Installation of Group 0+ and it is for the
children weight between 0-13kg 16
4.2 Installation of Group I and it is for the
children weight between 9-18kg 17
4.3 Installation of Group II and it is for the
children weight between 15-25kg 18
5. Care instructions
19-22
5.1 Removing the 5-point harness system and
cover 19
5.2 Refitting the 5-point harness system and
cover 20
5.3 Cleaning 21
5.4 Checklist 21
5.5 Warranty 22
6. Additional instruction 22
Important /03
Important
WARNING: Read this instruction manual carefully.
WARNING: The correct fitting of the seat belt,
along the red marking between the shell and
the base of the seat, is of vital importance for the
safety of your child. See figure 4-D and 4-G or the
sticker on the side of the product.
WARNING: For the future use of the seat, it is
important that you keep the instruction manual
carefully.
WARNING: Never leave your child unattended in
the car.
WARNING: Do not use a child safety seat if the
vehicle seat is equipped with a front airbag. This
can be dangerous. This does not apply to so-
called side airbags.
Before use our product, please read the instruction
manual carefully, the product is a safety product
and is only safe when used in accordance with the
instruction manual.
The product must only be used on a forward
facing seat that is fitted with an automatic 3-point
safety belt which is approved according to ECE
R16 or an equivalent standard.
The product may be used on either the front or
the back seat.
However, we recommend that it is fitted on the
back seat.
The product has been approved according to the
strictest European safety standards (ECE R44/04)
and is suitable for Group 0+ (0-13kg) and Group I
(9-18kg) and Group II (15-25kg).
After an accident the seat may become unsafe
due to damage that is not be noticeable
immediately. It should therefore be replaced.
The safety of the seat can only be guaranteed by
the manufacturer if used by the original owner.
We advise you strongly not to use a second-hand
product, because you are not sure what has
happened to it.
The belt pads are important for the safety of your
child, therefore use them all the time.
Ensure that all luggage and objects likely to cause
injury in the event of an accident are properly
secured.
Important /04
It is recommended that the car seat should not
be used more than 5 years from the date of
production. The properties of the products may
deteriorate due to, for example, ageing of the
plastic and this may not be visible.
The moving parts of the car seat should not be
lubricated in any way.
The baby car seat must not be used without the
cover. Please use an original cover, as the cover
contributes to the safety of the seat.
The seat must be secured with a seat belt, even
when not in use. An unsecured seat may injure
other passengers in the car in an urgent stop.
Ensure that the seat is not damaged by the
webbing between or underneath heavy luggage,
adjustable seats or slamming the car door etc.
No alterations may be made to the product as this
could affect part or the overall safety of the seat.
In hot weather the plastic and metal parts of the
product will be hot. You should cover the seat
when the car parked under the sun. In order to
prevent damage to the cover, do not remove the
product’s logo.
Use the seat even in a short journey, as this is
when most accidents occur.
Before the purchase, please check that the seat is
properly in your car.
Take a short break in long journey. So that your
child has some time for relaxation.
Set a good example yourself and always wear
your seat belt. Tell your child that he/she should
be never play with the belt buckle.
Questions
Contact your supplier or importer if you wish
to make a warranty claim or have any other
questions.
The seat belt
The product should be used with an automatic
3-point safety belt provided that this has been
approved according to ECE R16 or an equivalent
standard. Under no circumstances should an
automatic 2-point safety belt be used.
Your car seat can be fixed safely on almost seats
of the cars. However, on some seats the belts are
fixed so that proper installation is not possible.
If this is the case, try another seat.
Know your car seat /05
1. Cover
2. Group II guide hook
3. Shell
4. Belt guard door
5. Hole
6. Base
7. Belt Yoke
8. Hooks for lap belt
9. Lock-off device
10. Upper shaft and lock
11. Shoulder strap connector
12. Lower shaft and lock
13. Group 0+ blue guide hook
14. Flip out leg support
15. Group 0+ metal guide hook
Know your car seat /06
16. Head pillow
17. Belt pads
18. Shoulder belt
19. Cushion
20. Adjusting cover
21. Adjuster belt
22. Positioning handle
23. Adjusting device
24. Buckle pad
25. Buckle
26. Belt slots
27. Belt clip
28. Belt clip slot
29. Buckle clip
30. Buckle clip slot
Suitability /07
1. Suitability
1.1 Certification
The child safety seat has been designed, tested
and certified according to the requirements of the
European Standard for Child Safety Equipment
(ECE R 44/04).
The seal of approval E (in a circle) and the
approval number are located on the approval label
(sticker on the child safety seat).
This approval will be invalidated if you make any
modifications to the child safety seat. Only the
manufacturer is permitted to make modifications
to the child safety seat.
This approval will be invalidated if
you make any modifications to the
child safety seat. Only the
manufacturer is permitted to make
modifications to the child safety
seat.
*ECE = European Standard for Safety Equipment
Child Safety Seat
Tested and certified
according to ECE* R 44/04
Body Weight
Group
0+1+2 Up to 25kg
BS01
as a child safety seat installed
in a vehicle
Use in the vehicle /08
Danger! An airbag hitting a child safety seat can
cause serious injuries to your child, possibly
resulting in death.
Please observe the instructions in your vehicle
manual for the use of child seats.
Please observe the regulations applicable to your
particular country.
Do not use with 2-point belt.
The safety belt must be approved to ECE R 16 or a
comparable standard .
Do not use on passenger seats with a front airbag!
Can be used if the vehicle seat is equipped with a
3-point belt.
2. Use in the vehicle
DO NOT use on a passenger
seat with a front airbag!
DO NOT use with a 2-point belt -
use with a vehicle’s 3-point seatbelt.
Use in the vehicle /09
2.1 With the vehicle's 3-point
seatbelt
against the direction of travel yes5)
with 2-point belt no1)
with 3-point belt yes2)
on front passenger seat yes3)
on outer rear seat yes
on centre rear seat no4)
on seats facing backwards no
in the direction of travel yes6)
You can use your child safety seat as follows:
(Please observe the regulations applicable to your
particular country).
1. The use of a 2-point belt substantially
increases the risk of injury to your
child in the event of an accident.
2. The safety belt must be approved to
ECE R 16 or a comparable standard
(see test label on belt with an "E" or
"e" in a circle).
3. Do not use on passenger seats with
a front airbag!
4. Can be used if the vehicle seat is
equipped with a 3-point belt.
5. Only if seat in rear facing mode (birth-
13kg)
6. Only if seat in forward facing mode
(9-25kg)
Ce manuel convient aux modèles suivants
5
Table des matières
Autres manuels Phil & Teds siège auto
Phil & Teds
Phil & Teds Discovery 2015+ Manuel utilisateur
Phil & Teds
Phil & Teds Alpha PT CS 01 Manuel utilisateur
Phil & Teds
Phil & Teds LATCH BASE Manuel utilisateur
Phil & Teds
Phil & Teds columbus Manuel utilisateur
Phil & Teds
Phil & Teds alpha Manuel utilisateur
Phil & Teds
Phil & Teds columbus Manuel utilisateur
Phil & Teds
Phil & Teds alpha Series Manuel de service
