2
Phase 3 Connectors Ltd
www.p3connectors.com
Tel: + 44 (0) 1592 775995
Turning this lock does two things:
a) It locks the L3 connector in place to prevent accidental
disconnection under load and prevents further access to
the unit.
b) It switches an integral micro switch, which can be used
as a signal path for electrical protection device. A 3 pin
connector plug is available which will plug onto the 3 pin
connector on the rear of the unit, to allow for connection of
such devices.
How to Disconnect Cables from the Unit
The disconnect sequence is reversed. Therefore the connectors have
to be removed from Right to Left starting with the L3 connector.
1. Turn L3 key lock anticlockwise to release the L3 connector.
2. Now turn the L3 connector fully anticlockwise and pull out of the
port. Push the cover down.
The cover will not fully close at this point, however with the cover raised it will not be possible to
remove the next connector.
4. Now turn the L2 connector fully anticlockwise and unplug
(Note the L3 cover will automatically fully close during this action).
5. Once all connectors are removed, turn the Earth key lock anticlockwise.
This locks the Earth cover preventing access to the unit.
Product Features
800A Capacity
Phase 3’s level of Quality
is unmatched, Our
Distribution Boxes have a
high current rating of 800A,
Max Capacity.
M12 Cable Lug
Universal Connections,
like M12’s, make the
Distribution box so
versatile. Compatibility for
everyone.
Remote Control
Each Distribution Box
has a connection to allow
remote control, for your
convenience.
Locking Key System
Keep the box secure with
a Key locking system,
ensuring only authorised
individuals can operate.
