Persistent Systems Wave Relay MPU5 Manuel utilisateur
MPU5
BASIC OPERATOR MANUAL
VERSION 2.5
03EN073
Rev. G
Copyright 2010 - 2018, Persistent Systems, LLC. All rights reserved. Wave Relay®is a registered trademark of Persistent Systems, LLC
(“Persistent”). This Basic Operator Manual (the “Manual”) contains information that is the sole property of Persistent Systems, LLC.
Therefore, the Manual may not be excerpted, summarized, copied, distributed, or otherwise published, in whole or in part, without
the prior written permission of Persistent Systems, LLC. All other product and service names, trademarks, logos, and brands are
property of their respective owners. All non-Persistent company, product, and service names and all non-Persistent trademarks used
in this Manual are for identification purposes only. Use of these non-Persistent names, trademarks, logos, and brands does not imply
endorsement.
Copyright 2010 - 2018 Persistent Systems, LLC
Issued: July, 2018
READ MANUAL BEFORE OPERATION
DO NOT SWAP RADIO MODULES WHILE UNIT IS POWERED ON!
DO NOT POWER ON UNIT WITHOUT ANTENNAS ATTACHED!
PERSISTENT SYSTEMS
Headquartered in New York City since 2007, Persistent Systems LLC is a global communications technology company
which develops, manufactures and integrates a patented and secure Mobile Ad Hoc Networking (MANET) system: Wave
Relay® . The company’s industry-leading R&D team has designed wireless networking protocols to support their cutting
edge Wave Relay®system and has designed MIMO radios to allow the Wave Relay®MANET to achieve its highest
potential. Wave Relay®is capable of running real-time data, video, voice and other applications under the most difficult
and unpredictable conditions. Their suite of products is field proven and utilized in Commercial, Military, Government,
Industrial, Agriculture, Mining, Oil and Gas, Robotics, and Unmanned System markets.
THE MPU5
The MPU5 is the Next Generation Wave Relay®platform. Leveraging multiple leading edge technologies such as MIMO
and Android™, the MPU5 is a smart radio that delivers increased performance, reliability, and capability to the end user
in a small, cost-efficient package. Stream multiple HD Video feeds, run commercial and custom apps, view situational
awareness, and communicate with high quality audio all with a single device and a minimal number of accessories.
WAVE RELAY®MANET
The Wave Relay®System is a peer-to-peer wireless MANET networking solution in which there is no master node. If any
device fails, the rest of the devices continue to communicate using any remaining connectivity. By eliminating master
nodes, gateways, access points, and central coordinators from the design, Wave Relay®delivers high levels of fault
tolerance regardless of which nodes might fail. The system is designed to maximize the capacity of the radio frequency
(RF) spectrum and to minimize the network overhead. While optimizing efficiency, Wave Relay®also implements tech-
niques that increase multicast reliability. The advanced multicast functionality allows the system to support both multicast
voice and video over IP.
Wave Relay®is designed to maintain high bandwidth connectivity among devices that are on the move. The system
is scalable, enabling it to incorporate unlimited meshed devices into the wireless network, where the devices
themselves form the communication infrastructure. Even in highly dynamic environments, the system is able to
maintain connectivity by rapidly re-routing data as necessary. Wave Relay®is a self-forming and self-healing network
where nodes can move freely within the network. Critical information flows reliably throughout the network while
individual data paths are able to adapt at sub-second intervals. This unique approach creates an ideal environment
for maximizing performance across the available communications medium. Customers leverage Wave Relay®’s
straight forward and effective architecture to enable a true “Plug and Play” capability. Deploying a Wave Relay®
network is as simple as connecting a standard Ethernet cable; customers are immediately connected to everything on
the network.
Wave Relay®is a seamless wireless networking system offering a dynamic and reliable solution for all mobile networking
needs. The MPU5 offers the Wave Relay®MANET combined with other leading edge technologies in a single smart radio.
CONTACT PERSISTENT SYSTEMS
Persistent Systems
Tel: (212) 561-5895 | www.persistentsystems.com
Persistent Systems Support
Persistent Systems RMA
Email: [email protected]
Persistent Systems Sales
Email: [email protected]
Persistent Systems Training
Email: [email protected]
© 2010 - 2018 Persistent Systems, LLC – All Rights Reserved
6
TABLE OF CONTENTS
Introduction 4
Persistent Systems 4
The MPU5 4
Wave Relay® MANET 4
Safety 12
Suggested Hardware 16
Part I: Physical Setup 17
Section A: RF Setup 17
Inserting the Radio Module 20
Connecting Antennas 22
Section B: Power 26
Connecting Power 28
Removing Power 30
Powering On the Unit 32
Section C: Side Connector Cables 34
© 2010 - 2018 Persistent Systems, LLC – All Rights Reserved 7
TABLE OF CONTENTS
Parts List 35
Connecting a Cable to a Side Connector 36
Part II: Software Setup 40
Section A: Configuring the Management Computer 40
Parts List 40
Configuring the Management Computer (Windows) 42
Configuring the Management Computer (Linux) 48
Section B: Connecting the MPU5 to the Management Computer 49
Parts List 49
Section C: Accessing the Web Management Interface 52
Parts List 52
Section D: Basic Network Setup 60
Security Key 60
Assigning IP Address and Interface Names 62
Rebooting an Individual Node 65
© 2010 - 2018 Persistent Systems, LLC – All Rights Reserved
8
TABLE OF CONTENTS
Network Node List 66
Part III: Testing Connectivity 70
Check Neighbor Node Status 70
Perform a Throughput Test 72
Throughput Test Logging 74
Part IV: Using the Web Management Interface 76
View Individual Node Information 76
Configuring Radio Settings for a Single Node 78
Upgrading Firmware 80
Creating a Configuration File 82
Loading Settings from a Configuration File 84
Reset Node to Factory Configuration 86
Check GPS Status 87
Network Status Tab 88
Network Visualization 90
© 2010 - 2018 Persistent Systems, LLC – All Rights Reserved 9
TABLE OF CONTENTS
Part V: Device Operation 94
Zeroize the Security Key 94
Connect a Camera to the MPU5 96
Configuring Video Settings 98
Video Kiosk Mode 108
Connect an EUD or Handheld Display to the MPU5 114
Connecting a Monitor or TV to the Wave Relay®MPU5 116
Connect USB Accessories to the MPU5 119
Install Android™ Apps on the MPU5 121
Using Android™ Screenshot 124
Network Configuration Tab 126
Connect a PTT Device to the MPU5 128
Configure PTT Settings 130
Enable Push-to-Talk 131
Set Earpiece Volume 131
Set Microphone Level 132
© 2010 - 2018 Persistent Systems, LLC – All Rights Reserved
10
TABLE OF CONTENTS
Set Transmit Mode 133
Set Transmit or Receive Audible Checktone 134
Enable/Disable Low Battery Audible Notification 135
Selecting Channels 136
Customize a PTT Channel 136
Using Wave Relay®Push-to-Talk 138
Using Flash Override 139
Professional Installer – Compliance 140
Attachments 148
Autres manuels pour Wave Relay MPU5
1
Table des matières
Autres manuels Persistent Systems Radio
