Perreaux SX25i Manuel utilisateur

SX25i

SX25iSX25i

SX25i

25W Integrated Amplifier

Owners Manual

Perreaux Industries Limited makes no warranty for the use of its products, other

than those expressly contained in the warranty detailed herein. The Company

assumes no responsibility for any errors which may appear in this document,

reserves the right to change products or specifications detailed herein at any time

without notice, and does not make any commitment to update the information

contained herein. No licenses to patents or other intellectual property of Perreaux

are granted by the Company in connection with the sale of Perreaux products,

expressly or by implication.

mboob^ru®is a registered trademark of Perreaux Industries Ltd.

Terms and product names in this document may be trademarks of others.

This page has intentionally been left blank.

iii Introducing the

Perreaux Silhouette Series

Designed as a range of high quality, yet affordable modules; the

‘Silhouette’ series will compliment and enhance your existing

system.

Drawing on our extensive knowledge gained from more than a

quarter of a century of developing highest quality audio products,

the ‘Silhouette’ concentrates our legendary design and build

quality into a compact package without sacrificing performance.

The Perreaux ‘Silhouette’ series provides performance levels

never before seen in its class.

Key Features  Class A signal stages

 Highest quality internal power supply featuring a custom

designed, fully shielded toroidal transformer and 13200µF

of smoothing capacitance

 Optimal internal layout incorporating total separation

between channels

 Enhanced audio design featuring highest quality PCB and

minimal internal wiring

 Line-out connections

 High current drive

 Compact

 Stylish

The Perreaux “Silhouette” series takes you even closer to the

elusive goal of “The Perfect Re-Creation of a Musical

Event”.

From all of us at Perreaux Industries Limited, thank you for

choosing the Perreaux Silhouette Series SX25i Integrated

Amplifier.

iiii

ii Important Safety Instructions

Note: Please read all instructions carefully before attempting to

operate your Perreaux “Silhouette” SX25i Integrated

Amplifier.

ALWAYS switch off power to your system before attempting to

connect or disconnect cables.

ALWAYS disconnect your system from the mains before

attempting to clean your unit.

ALWAYS keep electrical equipment out of reach of children.

ALWAYS unplug sensitive electronic equipment during

electrical storms.

NEVER disconnect the mains earth from the system.

NEVER operate the SX25i with the cover removed.

NEVER use any liquid inside the SX25i.

NEVER bypass any fuse.

NEVER attempt to repair the SX25i. In the event of a problem,

please contact your Perreaux dealer.

NEVER expose the SX25i to extremely high or low

temperatures.

NEVER operate this product in an explosive atmosphere.

iii

iiiiii

iii Table of Contents

iiiIntroducing the Perreaux Silhouette Series .................................... 3

iiii

ii Important Safety Instructions ............................................................. 4

iii

iiiiii

iii Table of Contents .................................................................................. 5

1Unpacking and Placement .................................................................. 6

2Instant Install .......................................................................................... 7

3Front Panel Functions .......................................................................... 9

4Rear Panel Functions ..........................................................................10

5Special Design Philosophies..............................................................12

6Special Design Features .....................................................................14

7Care and Maintenance .......................................................................16

8Warranty Information ........................................................................17

9Extended Warranty Registration Form ..........................................18

1010

10 Troubleshooting Guide ......................................................................19

1111

11 Specifications........................................................................................21

1212

12 Physical Dimensions............................................................................24

1313

13 Contact Details .....................................................................................25

1 Unpacking and Placement

Unpacking

Procedure

The SX25i is packaged for maximum protection. To open, sit the

box upright and cut the reinforced tape at the top of the box. The

product can now be removed.

Pull the foam protecting end-caps off either side of the unit and

remove the black material covering.

The SX25i Integrated amplifier is now unpacked and ready for

further installation.

Note: Please retain all packaging material for future transport.

Box

Contents

1 x SX25i Integrated amplifier

1 x Product manual

3 x Performance analysis charts

1 x Detachable AC power cord

Placing Your

SX25i

The SX25i should generally be placed close to your source

equipment, thus keeping interconnect cabling between the SX25i

and associated components as short as practical. This will reduce

the systems susceptibility to radio frequency interference and the

negative effects associated with long cables.

Ventilation

Requirements

The SX25i is a convection cooled amplifier. For optimal

performance, the unit MUST receive adequate ventilation.

 Please do not cover the product with a cloth or similar.

 Please do not mount the SX25i directly onto carpeted

surfaces.

In the event that the SX25i is to be incorporated into custom

cabinetry, please refer to the dimensional information provided in

the Physical Dimensions section of the manual (Chapter 12).

Note: Please take all necessary steps to ensure that the unit

receives adequate ventilation

2 Instant Install

If you are like us, the first thing you will want to do is to play

your favourite piece of music through your new SX25i. The

following instructions are written to enable you to achieve this as

quickly as possible. These are not comprehensive instructions,

but are designed to enable you to play music now!

Note: Please take the time to read the SX25i manual thoroughly

as it incorporates many features, which will enhance its

operation.

Placement

The SX25i is a convection cooled amplifier and best results will

be achieved when placed on a solid surface with adequate

ventilation. DO NOT place on a carpeted floor or cover the

amplifier!

Place the SX25i close or near the source component in order to

make as short a connection as possible.

Turn off associated components

This minimises the potential to damage any other components

when connecting your SX25i into the system.

Connect source to SX25i

Connect the audio output from the source component to the

inputs at the rear of the SX25i. Refer to Chapter 4 for Rear Panel

information.

Connect loud speaker cables to SX25i

Connect your left and right channel loudspeaker leads to the

bindng posts at the rear of the amplifier. Refer to Chapter 4 for

Rear Panel information.

Note: Make sure the nominal impedance of the loudspeakers is

not lower than 2Ω.

Switch on SX25i

Caution! Prior to connecting the AC mains, please check the voltage

label on the rear panel to ensure that your unit conforms to

the power supply in your area. Never attempt to connect

the unit to the incorrect voltage.

Insert the power cord supplied into the rear of the SX25i and into

the wall. Switch on the socket at the wall and turn on the power

of the SX25i by setting the power switch down.

Switch on source component

Power up your source component and start your favourite

recording. Slowly increase the SX25i volume to achieve a

comfortable listening level.

CONGRATULATIONS!

Now that you have achieved your first objective, sit back, relax

and please read the rest of the manual at your own pace in your

favourite armchair whilst sipping a hot cup of coffee. You’ll find

the whole experience much more pleasurable whilst listening to

music.

3 Front Panel Functions

Power LED

This blue LED indicates the power status of your SX25i

integrated amplifier.

Volume Control

The high-quality, machined aluminium knob is the sole user

interface, reminding the user at every touch of the superior build

quality designed into the SX25i. Volume control motion is

smooth and accurate, providing absolute control with near

infinite gain resolution.

Autres manuels pour SX25i

Table des matières

Autres manuels Perreaux Amplificateur

Perreaux

Perreaux Audiant 80i Manuel utilisateur

Perreaux

Perreaux 6200B Manuel utilisateur

Perreaux

Perreaux Audiant 80i Manuel utilisateur

Perreaux

Perreaux SA3 Manuel utilisateur

Perreaux

Perreaux SM6 MKII Manuel utilisateur

Perreaux

Perreaux APV1P Manuel utilisateur

Perreaux

Perreaux 3370 Manuel utilisateur

Perreaux

Perreaux E110 Manuel utilisateur

Perreaux

Perreaux E1 Manuel utilisateur

Perreaux

Perreaux 4004A Manuel utilisateur

Perreaux

Perreaux SXP2 Manuel utilisateur

Perreaux

Perreaux PMF2000 Manuel utilisateur

Perreaux

Perreaux Audiant DP32 Manuel utilisateur

Perreaux

Perreaux PMF1070 Manuel utilisateur

Perreaux

Perreaux eloquence 250i Manuel utilisateur

Perreaux

Perreaux SP100 Manuel utilisateur

Perreaux

Perreaux VP4 Manuel utilisateur

Perreaux

Perreaux GS2002 Manuel utilisateur

Perreaux

Perreaux Silhouette SXV2 Manuel utilisateur

Perreaux

Perreaux PMF1150B Manuel utilisateur

Perreaux

Perreaux EP Manuel utilisateur

Perreaux

Perreaux 200i Manuel utilisateur

Perreaux

Perreaux Silhouette SXH2 Manuel utilisateur

Perreaux

Perreaux SM5 Manuel utilisateur

Manuels Amplificateur populaires d'autres marques

ASTRO

ASTRO HVO V40 P Manuel utilisateur

Marantz

Marantz SUPERSCOPE BLA-545 Instructions de montage

NAD

NAD CI980 Manuel utilisateur

Technics

Technics SE-CH770 Manuel utilisateur

Harman Kardon

Harman Kardon HK6300 Manuel utilisateur

NAD

NAD T975 Manuel utilisateur

McIntosh

McIntosh MA6850 Manuel utilisateur

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manuel utilisateur

Viatron

Viatron Autrix Manuel utilisateur

GME

GME GA9800 Manuel utilisateur

Atlas

Atlas CP700 Manuel utilisateur

Roland

Roland KC-1000 Manuel utilisateur

Pyle

Pyle PFMRA350BW Manuel utilisateur

Advantage

Advantage S-250 Manuel utilisateur

IRT Electronics

IRT Electronics DVA-3007 Manuel utilisateur

Dimavery

Dimavery BA-100 Series Manuel utilisateur

Sony

Sony XM-S400D Manuel utilisateur

Schertler

Schertler ROY X Manuel utilisateur