PerfectVision PV-SFA Manuel utilisateur
INSTALLATION INSTRUCTIONS
UNPACKING INSTRUCTIONS
Carefully open the packaging, remove contents and lay out parts on a protective surface to avoid damage.
•
Check package contents against the Supplied Parts List in the next page(s) to assure that all components were received
•
undamaged. Do not use damaged or defective parts.
Carefully read all instructions before attempting installation.
•
IMPORTANT SAFETY INFORMATION
Install mount with care. Please read these instructions before beginning this installation, and carefully follow all
instructions contained herein. Use proper safety equipment and protocol during installation.
Please consult PerfectVision for help if you:
Don't understand these directions or have any doubts about the safety of the installation.
•
Are uncertain or unfamiliar with the nature of the existing structure to be reinforced.
•
For questions and consulting please call PerfectVision at 1-800-205-8620. Ask for Wireless Sales & Product Support.
Note: Please leave instructions in shelter or cabinet on site for future reference.
NOTE: SEE PAGE 16 & 17 FOR
SAFETY CLIMB ROUTING
INFORMATION
NOTE: SEE PAGE 18, 19, & 20
FOR MOUNT CLASSIFICATION
AND ANTENNA REFERENCE
Do not use this product for any purpose or in any configuration not explicitly stated in this instruction. We hereby disclaim
any and all liability for injury or damage arising from incorrect assembly, incorrect mounting, or incorrect use of this product.
DJN
DRAWN BY
PART #: PV-SFA
6
PAGE NUMBER
REVISION
L.I.F.E. MOUNT™ SECTOR FRAME
1 OF 20
4/16/2021
DATE
3/8"
3/8"
4 1/2"
1"
1. Supplied Parts List
.........................................................................................................
PV-SFA-B Configurations & Part list
.........................................................................3
PV-SFA-B Single Sector Parts List
............................................................................4
PV-SFA-B Single Sector Parts List Cont'....................................................................5
Additional Parts List................................................................................................6
Optional Stiff Arm Leg Bracket Parts list (For Single Sector installation)......................7
2. Installation Steps
...........................................................................................................
Pre-Assembling Sector Frame..................................................................................8
Pre-Assembling Sector Frame cont'..........................................................................9
Pre-Assembling Sector Frame & Installing Frame to Tower Leg..................................10
Pre-Assembling Sector Frame & Installing Frame to Tower Leg cont'..........................11
Installing Tie Back Pipes (3 Sector Installation).........................................................12
Installing Tie Back Pipes (Single Sector Installation)..................................................13
Installing Horizontal Angle Kit & Anchors..................................................................14
Installing Antenna Pipe
...........................................................................................15
3. Reference Pages
.............................................................................................................
Safety Climb Routing
..............................................................................................16
Safety Climb Routing cont'
......................................................................................17
Mount Classification Identification............................................................................18
Mount Classification Identification Cont'
...................................................................19
Mount Classification Identification for Dual Collars
....................................................20
TABLE OF CONTENTS
www.perfect-vision.com
PV-SFA-INS-01-R6
1-844-887-6723
2 OF 20
PV-SFA-B
L.I.F.E. MOUNT™ - SECTOR FRAME
SEE TABLE 1
PV-SFA-ANGLE##-HD
FACE ANGLE
QTY: 2
WEIGHT: SEE TABLE 1
P520-015-01
X-BRACE FRAME
QTY: 2
WEIGHT: 50 LBS EACH
Table 1: PV-SFA-B Configurations
Part Number
Mount Width
Face Angle
Total Weight
PV-SFA7-B
7' 6"
PV-SFA-ANGLE7-HD
510 lbs
PV-SFA10-B
10' 6"
PV-SFA-ANGLE10-HD
560 lbs
PV-SFA12-B
12' 6"
PV-SFA-ANGLE12-HD
592 lbs
PV-SFA14-B
14' 6"
PV-SFA-ANGLE14-HD
624 lbs
NOTE:
DRAWINGS NTS
Supplied Parts List
3 OF 20
1-844-887-6723
PV-SFA-INS-01-R6
www.perfect-vision.com
W097-098-01
LEG ATTACHMENT OUTER PLATE
QTY: 2
WEIGHT: 25 LBS EACH
P520-018-03
LEG ATTACHMENT INNER PLATE
QTY: 2
WEIGHT: 20 LBS EACH
P520-010-01
SWIVEL PLATE
QTY: 2
WEIGHT: 12 LBS EACH
P520-017-01
TOP ADJUSTMENT PLATE
QTY: 1
WEIGHT: 17 LBS
P520-011-10
WASHER PLATE
QTY: 4
WEIGHT: 1 LBS EACH
P520-019-01
STIFF ARM END PLATE
QTY: 2
WEIGHT: 1 LBS EACH
P597-223-01
STIFF ARM CROSSOVER
QTY: 2
WEIGHT: 5 LBS EACH
HK6-4025-04
1/2" X 2-9/16" U-BOLT KIT
QTY: 16
WEIGHT: 0.84 LBS EACH
150"
PV-SA-PIPE-150
TIE BACK PIPE
QTY: 2
WEIGHT: 46 LBS EACH
NOTE: IF USING 2-7/8" OR 3-1/2" ANTENNA PIPE, PURCHASE U-BOLTS SEPARATELY
NOTE:
DRAWINGS NTS
Supplied Parts List
4 OF 20
1-844-887-6723
PV-SFA-INS-01-R6
www.perfect-vision.com
H10-1016-10
5/8" X 16" A36 ALL THREAD
QTY: 8
WEIGHT: 1.57 LBS EACH
H02-0010-11
5/8" DIA NUT
QTY: 16
WEIGHT: 0.13 LBS EACH
H03-0010-02
5/8" DIA FLAT WASHER
QTY: 20
WEIGHT: 0.06 LBS EACH
H04-0010-01
5/8" DIA LOCK WASHER
QTY: 20
WEIGHT: 0.06 LBS EACH
HK1-0815-10
1/2" X 1-1/2" BOLT KIT
QTY: 10
WEIGHT: 0.24 LBS EACH
HK1-0817-10
1/2" X 1-3/4" BOLT KIT
QTY: 8
WEIGHT: 0.23 LBS EACH
HK1-1020-12
5/8" X 2" A325 BOLT KIT
QTY: 14
WEIGHT: 0.35 LBS EACH
HK1-1025-12
5/8" X 2-1/2" BOLT KIT
QTY: 6
WEIGHT: 0.52 LBS EACH
HK1-1040-12
5/8" X 4" BOLT KIT
QTY: 2
WEIGHT: 0.64 LBS EACH
NOTE:
DRAWINGS NTS
Supplied Parts List
5 OF 20
1-844-887-6723
PV-SFA-INS-01-R6
www.perfect-vision.com
PV-HSK
L.I.F.E. MOUNT™ - SECTOR FRAME HORIZONTAL ANGLE KIT
WEIGHT: 300 LBS
120"
P297-019-01
BRACE ANGLE
QTY: 6
WEIGHT: 50 LBS EACH
NOTE:
DRAWINGS NTS
Supplied Parts List
6 OF 20
1-844-887-6723
PV-SFA-INS-01-R6
www.perfect-vision.com
PV-SAM-U
STIFF ARM LEG BRACKET
WEIGHT: 20 LBS
W033-005-01
LEG BRACKET
QTY: 2
WEIGHT: 2.5 LBS EACH
P597-019-01
CROSSOVER PLATE
QTY: 2
WEIGHT: 5 LBS EACH
P597-026-03
BENT BACKING PLATE
QTY: 1
WEIGHT: 1 LBS
HK1-0860-60
1/2" X 6" BOLT KIT
QTY: 2
WEIGHT: LBS EACH
HK1-1017-12
5/8" X 1-3/4" BOLT KIT
QTY: 2
WEIGHT: 0.24 LBS EACH
HK1-1017-12
5/8" X 2-3/4" BOLT KIT
QTY: 2
WEIGHT: 0.53 LBS EACH
H10-1012-08
1/2" X 12" ALL THREAD
QTY: 2
WEIGHT: 0.63 LBS EACH
H02-0008-13
1/2" A63DH NUT
QTY: 4
WEIGHT: 0.07 LBS EACH
H03-0008-02
1/2" F436 FLAT WASHER
QTY: 4
WEIGHT: 0.02 LBS EACH
H04-0008-01
1/2" LOCK WASHER
QTY: 4
WEIGHT: 0.02 LBS EACH
OPTIONAL STIFF ARM
ATTACHMENT KIT REQUIRED
FOR SINGLE SECTOR MOUNT
SETUP. (1) REQUIRED PER PIPE
ARM. SEE STEP 6B FOR DETAILS.
NOTE:
DRAWINGS NTS
Supplied Parts List
7 OF 20
1-844-887-6723
PV-SFA-INS-01-R6
www.perfect-vision.com
3/8"
3/8"
4 1/2"
1"
B
C
D
DETAIL A
FRAME ASSEMBLY
FACE ANGLE
X-FRAME
ROTATION PLATE
NOTE: DO NOT TIGHTEN
HARDWARE UNTIL FRAME
IS CONSTRUCTED
DETAIL B
SCALE 1 : 7
DETAIL B
TOP PLATE ATTACHMENT
1/2" X 1-3/4" BOLT
1/2" FLAT WASHER
1/2" LOCK WASHER
1/2" NUT
DETAIL C
SCALE 1 : 6
DETAIL C
BOTTOM PLATE ATTACHMENT
1/2" X 1-3/4" BOLT
1/2" FLAT WASHER
1/2" LOCK WASHER
1/2" NUT
DETAIL D
SCALE 1 : 8
DETAIL D
FACE ANGLE ATTACHMENT
1/2" X 1-1/2" BOLT
1/2" FLAT WASHER
1/2" LOCK WASHER
1/2" NUT
PRE-ASSEMBLING SECTOR FRAME
Pre-assemble the Sector Frame as shown at the ground level. Connect (2) Rotation Plates to the (2) X-Frames using (8) 1/2"
x 1-3/4" Bolt Kits. Connect (2) Face Angles to the Frame using (8) 1/2" x 1-1/2" Bolt Kits.
Note:
X-Frames can be oriented to allow equipment mounting on the inside or the outside of the frame.
NONE
685.29
---
STEP 1
www.perfect-vision.com
PV-SFA-INS-01-R6
1-844-887-6723
8 OF 20
3/8"
3/8"
4 1/2"
1"
F
G
DETAIL E
ADJUSTMENT PLATE INSTALLATION
DETAIL F
SCALE 1 : 10
DETAIL F
TOP ADJUSTMENT PLATE
TOP ADJUSTMENT
PLATE
DETAIL G
SCALE 1 : 10
DETAIL G
BOTTOM ADJUSTMENT PLATE
BOTTOM
ADJUSTMENT PLATE
TOWER SIDE
FRAME SIDE
3 2 1
FRAME SIDE
TOWER SIDE
A
B
PRE-ASSEMBLING SECTOR FRAME CONT'
Continue pre-assembly by attaching Top and Bottom Adjustment Plates to the frame using (3) 5/8" x 2-1/2" Bolt Kits each.
Note: Center Bolt location is determined by taper of tower leg at mount elevation. See Detail H for hole details. Reference
Table 2 for hole installation based on leg taper. Note: Leg taper is denoted as degrees from vertical.
DETAIL H
TAPER ADJUSTMENT DETAILS
5/8" X 2-1/2" BOLT
WASHER PLATE
5/8" FLAT WASHER
5/8" LOCK WASHER
5/8" NUT
Table 2: Leg Taper Installation Holes
Leg Taper Range
0
to 0.75
0.75
to 1.75
1.75
to 2.25
2.25
to 3.5
3.5
to 4.5
4.5
to 5.5
Upper Leg Hole
112233
Lower Leg Hole
B
A
B
A
B
A
NONE
685.54
---
STEP 2
www.perfect-vision.com
PV-SFA-INS-01-R6
1-844-887-6723
9 OF 20
3/8"
3/8"
4 1/2"
1"
J
DETAIL I
OUTER LEG ATTACHMENT PLATE
INSTALLATION
OUTER LEG ATTACHMENT PLATE
NOTE: IF SAFETY
CLIMB PRESENT
SEE PAGE 15 & 16!
DETAIL J
SCALE 1 : 8
DETAIL J
OUTER LEG ATTACHMENT PLATE
HARDWARE
5/8" NUT
5/8" LOCK WASHER
5/8" FLAT WASHER
5/8" X 2" BOLT
L
DETAIL K
TOWER ATTACHMENT
DETAIL L
SCALE 1 : 8
DETAIL L
TOWER ATTACHMENT HARDWARE
INNER LEG ATTACHMENT PLATE
5/8" NUT
5/8" LOCK WASHER
5/8" FLAT WASHER
5/8" X 18" ALL THREAD
PRE-ASSEMBLING SECTOR FRAME LEG BRACKETS
INSTALLING FRAME ONTO TOWER LEG
Continue pre-assembly by connecting (2) Outer Leg Attachment Plates using (4) 5/8" X 2" Bolt kits each. Note location of flat
washers on slotted holes. See Reference Pages R-1 & R-2 for the option to install Safety Climb Routing (sold separately).
Install the Sector Frame onto the tower at the required elevation using (2) Inner Leg Attachment Plates and (8) 5/8" x 18" All
Thread Rods with Hardware. Install Leg Brackets to be parallel with the centerline of the tower.
Note: If desired, Antenna Pipe may be installed prior to attaching frame to tower leg. See Step 8.
NONE
685.54
---
STEP 4
STEP 3
www.perfect-vision.com
PV-SFA-INS-01-R6
1-844-887-6723
10 OF 20
Table des matières
Manuels Aide à la mobilité populaires d'autres marques
Rhythm Healthcare
Rhythm Healthcare B3800F Manuel utilisateur
AMF-BRUNS
AMF-BRUNS PROTEKTOR Manuel utilisateur
Drive DeVilbiss Healthcare
Drive DeVilbiss Healthcare OTTER Manuel utilisateur
Rhythm Healthcare
Rhythm Healthcare C500U Manuel utilisateur
Lumex
Lumex RJ4200A Manuel utilisateur
Rebotec
Rebotec Jumbo Manuel utilisateur