Pepperl+Fuchs ECOM Ident-Ex 01 Manuel utilisateur

Bluetooth Scanner Ident-Ex®01

Operating instructions

Zone 1/21 |/ DIV 1

Note:

The current safety instructions, operating instructions, EC Declaration of Con-

formity and the Certicates of Conformity can be downloaded from the relevant

product page at www.ecom ex.com, or alternatively they can be requested direct-

ly from the manufacturer.

Content

1. Application ...........................................................................................................3

2. Specications.......................................................................................................3

3. Functional Description / Operating Instructions ................................................3

4. Scope of Delivery .................................................................................................3

5. Charging...............................................................................................................3

6. Battery indicator of the Ident-Ex.........................................................................4

7. Description of Buttons and LEDs .......................................................................4

8. Switching Ident-Ex On and Off with Power Button ............................................5

9. Turning off Ident-Ex through time setting ..........................................................5

10. Restart the Ident-Ex ..........................................................................................5

11. Hardware reset ..................................................................................................5

12. Settings of the Ident-Ex .....................................................................................5

13. Reset settings ....................................................................................................5

14. Reading with a head module .............................................................................6

15. Bluetooth pairing of Ident-Ex ............................................................................6

16. Connection with HID-Prole .............................................................................6

17. Connection with SPP-Prole ............................................................................7

18. Batch Mode ........................................................................................................8

19. CamScan Keyboard APP ...................................................................................9

20. Firmware update ...............................................................................................9

21. NFC-TAG ..........................................................................................................10

1. Application

The intrinsically safe RFID and Barcode Scanner Ident-Ex 01 can be connected

via Bluetooth to an input device (Smartphone, Tablet, etc.) or used as stand-alo-

ne-device.

2. Specications

Operating temperature: -20°C … +50°C

Storage temperature: Storage temperature for shipping is -20° C ... +35° C.

Recommended temperature around 23° C

for long term storage.

Dimensions: 221 x 84 x 58mm;

235 x 84 x 58mm (Ex-25 head module)

Weight: 425-560 g (depends on head module)

3. Functional Description / Operating Instructions

Please read this manual carefully before use so that you are familiar with, and

are able to use, all of the functions of your Ident-Ex. For your own safety and

information please read through the instructions on the following pages.

4. Scope of Delivery

- Ident-Ex 01

- Desired head module according to customer requirements

- Charging cable

- Travel charger

5. Charging

The Ident-Ex 01 must be charged at regular intervals. Independent of the moun-

ted head module, the Ident-Ex 01 must be charged every 6 months at least once

50 percent.

When you connect a discharged Ident-Ex 01, it can take several minutes until the

charging function is visualized. Insert the charger plug into a power outlet. The

charging port is located at the end of the handle. Insert the charging plug to the

charging port. The LEDs indicate the charging status as described in chapter

Battery indicator of the Ident-Ex.

6. Battery indicator of the Ident-Ex

Description of the LED status of the battery indicator (running on battery)

LED Battery level

The green LED illuminates permanently Ident-Ex battery status by 100-60%

The yellow LED illuminates permanently Ident-Ex battery status by 59-30%

The red LED illuminates permanently Ident-Ex battery status by 29-6%

The red LED blinks Ident-Ex battery status by 5-0%

Description of the LED status of the battery indicator (while charging)

LED Battery level

The green LED illuminates permanently Ident-Ex is fully charged; battery status by 100%

The red and yellow LEDs illuminate

permanently and the green LED blinks

Charging process of Ident-Ex by 99-60%

The red LED illuminates permanently

and the yellow LED blinks

Charging process of Ident-Ex by 59-30%

The red LED blinks Charging process of Ident-Ex by 29-0%

7. Description of Buttons and LEDs

SPP

Button

Bluetooth

LED

Trigger

Button

Battery

indicator

Power

Button

Power

LED

Scan

LED

SPP

LED

6. Battery indicator of the Ident-Ex

Description of the LED status of the battery indicator (running on battery)

LED Battery level

The green LED illuminates permanently Ident-Ex battery status by 100-60%

The yellow LED illuminates permanently Ident-Ex battery status by 59-30%

The red LED illuminates permanently Ident-Ex battery status by 29-6%

The red LED blinks Ident-Ex battery status by 5-0%

Description of the LED status of the battery indicator (while charging)

LED Battery level

The green LED illuminates permanently Ident-Ex is fully charged; battery status by 100%

The red and yellow LEDs illuminate

permanently and the green LED blinks

Charging process of Ident-Ex by 99-60%

The red LED illuminates permanently

and the yellow LED blinks

Charging process of Ident-Ex by 59-30%

The red LED blinks Charging process of Ident-Ex by 29-0%

7. Description of Buttons and LEDs

SPP

Button

Bluetooth

LED

Trigger

Button

Battery

indicator

Power

Button

Power

LED

Scan

LED

SPP

LED

There is only one button on the bottom side of the Ident-Ex. The main trigger.

8. Switching Ident-Ex On and Off with Power Button

To turn on the Ident-Ex, you have to keep the Power Button pressed for 3

seconds. Please note that the Ident-Ex can only be turned off, if the device is in

battery operation.

9. Turning off Ident-Ex through time setting

The Ident-Ex has a setting which allows the device to automatically turn off after

a dened timer period (see “Switch off time” setting in Software Manual DOCT-

7016).

If no Bluetooth connection could be found, the predened time to automatically

turn the device off will start. If a scan with Trigger or Main Trigger Button will be

started in this time, the predened time will be resetted and starts again. As long

as the device doesn’t get connected via Bluetooth or a scan will be made during

the predened time, it will automatically turn off. Again, the Ident-Ex can only be

turned off if it is in battery operation. Turning off the Ident- Ex 01 through time

setting can be disabled by setting the Switch off time = 0.

10. Restart the Ident-Ex

During the charging process, the Ident-Ex 01 will be automatically switched on.

It is not possible to switch off the Ident-Ex 01 during the charging process. To

restart the Ident-Ex 01 during the charging process, press the Power Button for

approx. 10 seconds until the Power LED goes out. Release the Power Button and

the Ident-Ex 01 will start again.

11. Hardware reset

Press the Power Button for approx. 10 seconds and the Ident-Ex 01 is doing a

hardware reset.

12. Settings of the Ident-Ex

The Ident-Ex 01 can be adjusted with the “eSETUP Ident-Ex” App. This App can

be downloaded from the ecom App Library https://www.ecom-ex.com/nc/apps/ .

13. Reset settings

The rmware of the Ident-Ex allows to reset the settings to the factory settings.

Therefore, the buttons Main Trigger, Trigger and SPP have to be pressed simul-

taneously for 2 seconds while starting the Ident-Ex.

Settings, such as the selection of the head module and the selection of the

module which reacts by pressing the Main Trigger or Trigger, will not be part of

the reset.

14. Reading with a head module

The head module which shall be used for reading can be chosen through the

settings. Also, the button which starts the reading of the head module can be

selected. The selected button starts the reading and sends the data with the

Bluetooth connected device.

While reading, the Scan LED blinks. When the reading was successful, the Scan

LED lights up for a dened timeperiod “setting in the Software Manual DOCT-

7016” and an accustic signal rings. (Can be deactivated through settings of

Ident-Ex => “Enable Beep”)

15. Bluetooth pairing of Ident-Ex

Switch on the Ident-Ex 01 to pair it with a device. The SPP and Bluetooth LED

must not illuminate. If the Bluetooth LED is illuminating, press the SPP Button

for approx. 2 seconds until the Bluetooth LED goes off.

Pairing with a PC:

Chose the Bluetooth name of the Ident-Ex 01 through “Start” -> “System control”

-> “Hardware and sound” -> “add Bluetooth device”

Pairing with a Smartphone or Tablet:

Chose the Bluetooth name of the Ident-Ex 01 through “Settings” → “Bluetooth”

Now, the device is paired with the Ident-Ex.

No pairing password is required because of the SSP-Mode

(Secure Simple Pairing) of the Ident-Ex 01.

16. Connection with HID-Prole

Autoconnect:

After switching on the Ident-Ex 01, the Ident-Ex 01 will automatically try to

connect with the last connected device with HID-Prole. The automatically

connecting process after start-up can be switched on/off in the settings (see

“HID autoconnect” setting in the Software Manual DOCT-7016).

Lost connection:

If the Ident-Ex 01 has lost the connection (e.g. out of range), the Ident-Ex 01 will

try to connect to the device approx. every 5 seconds until the connection was

made or the Ident-Ex 01 was switched off.

Disconnect / start new connection:

The connection of the Ident-Ex and the device (Bluetooth LED illuminating) can

be terminated by pressing the SPP Button for approx. 2 seconds.

If the Ident-Ex 01 is not connected with a device (Bluetooth LED off) and the SPP

Button is pressed for approx. 2 seconds, the Ident-Ex 01 tries to connect to the

last connected device. If no connection can be established and the SPP Button

is pressed further, the Ident-Ex 01 tries to connect to the next of the 5 saved

connection every 5 seconds (only if SPP Button pressed).

Advice:

If you are using the Ident-Ex 01 with a Android device in HID-Prole, it is possible

that the Soft-Keyboard of the operating system can’t be activated, for further

information’s see„19 CamScan Keyboard APP“.

17. Connection with SPP-Prole

To start a connection with SPP-Prole, the connection has to be established

from the input device. The connection will be shown as COM-PORT on the PC.

Use this COM-PORT to communicate with the Ident-Ex 01. To start a connection

with SPP-Prole, the SPP and Bluetooth LED have to be off, otherwise no suc-

cessful connection can be established.

Connecting:

To connect in SPP-Prole, the input device has to start a connection inquiry

(open connection with COM-PORT). The SPP and Bluetooth LED will illuminate if

a successful connection was established. If only the Bluetooth LED is illumina-

ting, disconnect (see “Disconnect”) and start a new connection. See Software

Manual (DOCT-7016) for more detailed information’s.

Disconnect:

The connection of the Ident-Ex and the device can be terminated by pressing the

SPP Button for approx. 2 seconds until the SPP and Bluetooth LED goes out. Af-

ter disconnect the SPP connection, the Ident-Ex 01 tries to connect in HID-Pro-

le with the last device. The Bluetooth LED will illuminate if the HID connection

was successful.

Lost connection:

If the Ident-Ex 01 lost the SPP connection (e.g. out of range), the SPP and Blue-

tooth LED goes out and a new connection with SPP-Prole must be established

(if the Ident-Ex 01 is in range).

Generic:

If the Ident-Ex 01 is connected with SPP-Prole with a input device, data can be

transferred to or from the Ident-Ex 01.

Functions:

• Use of the serial protocol

Data can be transferred to or from the Ident-Ex 01 with the serial protocol,

e.g. read rmware version, Bluetooth-address or change each settings point

directly at the Ident-Ex 01

• Transfer settings (XML-File)

All settings for the Ident-Ex 01 will be saved in a XML-File and can be transfer-

red to the Ident-Ex 01 via Bluetooth and XModem1k transfer

• Use a Keyboard Wedge

• Firmware update

18. Batch Mode

If the Ident-Ex is not connected via Bluetooth (HID or SPP mode) to a device, all

scans will be stored in the internal storage. It can store up to 511 scans. These

stored scans can be readout from the Ident-Ex 01 if connected via SPP-Prole.

If the internal storage is full, no new scan can be made until the memory was

readout and erased. See Software Manual (DOCT-7016) for further information’s.

Erase last scan with Trigger or Main-Trigger Button:

It is possible to delete the last scan with the Trigger or Main-Trigger Buttons

(see “Trigger” and “Main-Trigger” settings in the Software Manual DOCT-7016).

The last scan can only be erased if the Ident-Ex 01 is not connected to a input

device (SPP and Bluetooth LED off).

19. CamScan Keyboard APP

Because of the different operating systems it is possible to get deviations with

the Software-Keyboard of your mobile device.

Please install the “CamScan Keyboard” App. The App can be downloaded under

https://www.ecom-ex.com/nc/apps/ .

After installation, only one adjustment must made to use the Ident-Ex 01 as

external keyboard and the Software-Keyboard together.

Open the App and follow the instructions. The App will be closed after the rst

settings. Please open the App again.

Please activate “Show Soft Keyboard” in the “CamScan Keyboard Preferences”.

Close the App after this change and now it is possible to use the Ident-Ex01 as

external keyboard and the Software-Keyboard together.

20. Firmware update

The Ident-Ex 01 can be updated with the newest rmware if connected with

SPP-Prole. The rmware update can be made with the “Ident-Ex Setup” soft-

ware (Android and Windows) or “HyperTerminal”. See Software Manual (DOCT-

7016) for further information’s.

21. NFC-TAG

Behind the label of the Ident-Ex 01 is a NFC-Tag integrated. This TAG can be

used to pair the Ident-Ex 01 with a Smartphone/Tablet. Additionally the NFC-TAG

can be used as ID or for any other purpose. The mounted NFC-TAG is freely

programmable.

Data of the NFC-TAGs:

• Chip: NXP NTAG216

• Memory: 888 Byte

• Frequency: 13.56 MHz

Table des matières

Autres manuels Pepperl+Fuchs Lecteur de codes-barres

Pepperl+Fuchs

Pepperl+Fuchs OHV10-F228-R2 Guide de référence

Pepperl+Fuchs

Pepperl+Fuchs ODT-MAC400 Series Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs POWERSCAN PSCAN-D-1 Series Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs VB14A Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs Ex-DRAGON-D101 Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs PSCAN-D-1D-D2 Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs OHV100 Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs IDM-Z2-161-M-1D-J2-BT-N-N0 Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs OHV300 Mode d'emploi

Pepperl+Fuchs

Pepperl+Fuchs VB8-305 Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs VB14N Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs IDM-Z2-264-M-2D-J2-BT-N-N0 Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs OHV2000-F22-B15 Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs VISOLUX VB14 Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs OHV1000-series Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs VB14N Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs OHV110-F228-R2 Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs ODT-HH-MAH120 Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs VB10 Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs FUQ-B8 Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs VISIOLUX VB14 Series Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs Visolux VB12 Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs OHV10-F228-R2 Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs OHV210-F229-B15 Manuel utilisateur

Manuels Lecteur de codes-barres populaires d'autres marques

POSMicro

POSMicro Datalogic PowerScan D7100 Manuel utilisateur

Marson

Marson MT780 Guide de configuration rapide

NCR

NCR RealPOS Manuel utilisateur

Motorola

Motorola SE3300 Guide de configuration rapide

Element

Element P130BT Manuel utilisateur

Motorola

Motorola Symbol LS3008 Manuel d'installation et d'exploitation

Meec tools

Meec tools OBD-II / VAG Manuel utilisateur

SICK

SICK CLP 100 Manuel utilisateur

Royal Tag SA

Royal Tag SA I-Read Manuel utilisateur

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuel utilisateur

Meteor

Meteor 8310 Manuel utilisateur

Denso

Denso BHT-500B Manuel utilisateur

Datalogic

Datalogic Heron HD3130 Manuel utilisateur

Motorola

Motorola MP6000 Instructions de montage

Newland

Newland NLS-HR15-BT Manuel utilisateur

ARTDEV

ARTDEV AS-1310 Manuel utilisateur

Aopos

Aopos AS290 Manuel utilisateur

ENS

ENS 367-5455 Manuel utilisateur