Pelpro PPC90 Manuel utilisateur

PelPro Cast Iron Pellet Stove

Please read this entire manual before installation and use of this pellet fuel-burning room heater, and save for future refer-

ence. Failure to follow these instructions could result in property damage, bodily injury or even death. Contact local building or

re ofcials about restrictions and installation inspection requirements in your area.

Note: To obtain a French translation of this manual, please contact your dealer or visit www.pelprostoves.com. Pour obtenir

une traduction francaise de ce manuel, s’il vous plait contracter votre revendeur ou visitez www.pelprostoves.com

WARNING!

PelPro Cast Pellet Stove • 7093-600 • 07/13/16 pelprostoves.com2

Get to Know Your PelPro®Stove

Vacuum SwitchDigital Control

Ambient Probe

Convection Blower

Outside Air

Connection

Optional External

Thermonstat Connection

Vacuum Switch

Exhaust Blower

Exhaust Probe

Exhaust

Connection

Snap Disc

Drop Tube

Firepot

Igniter

(Behind Firepot)

Baffles (3)

Safety First!

Safety Alert Key: It is important to pay attention to alerts you will see throughout this manual to ensure your safety.

• DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury.

•WARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury.

• CAUTION! Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

• Notice: Indicates practices which may cause damage to the appliance or to property.

• Pro Tip: Indicates additional information to help you better understand your stove and optimize its performance.

Notice: Fire Risk

Pelpro disclaims any responsibility, and the warranty and agency listing will be voided, by the below actions.

DO NOT:

• Install or operate damaged appliance

• Modify appliance

• Install other than as instructed by the manufacturer

• Operate the appliance without fully assembling all components

• Over re (burning at higher temperatures than recommended causing permanent damage to the stove)

• Install any component not approved by the manufacturer

• Install parts or components not listed or approved

• Disable safety switches

Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. For assistance

or additional information, consult a qualied installer, service agency or your dealer.

DANGER! HOT SURFACES!

Glass and other surfaces are hot during operation AND cool down.

Hot glass will cause burns.

• Do not touch glass until it is cooled

• NEVER allow children to touch glass

• Keep children away; if you expect that children may come into contact with this appliance, we recommend a barrier

such as a decorative screen (see your retailer for suggestions)

• CAREFULLY SUPERVISE children in same room as stove

• Alert children and adults to hazards of high temperatures

High temperatures may ignite clothing or other ammable materials.

• Keep clothing, furniture, draperies and other ammable materials away

PelPro Cast Pellet Stove • 7093-600 • 07/13/16pelprostoves.com 3

Table of Contents

Getting Started........................................................4

• Pallet removal

• What’s included

• What you’ll need

Installing Your Stove...............................................6

• Getting ready

• Placing your stove

• Venting your stove

Using Your Stove..................................................13

• Starting your stove

• What to expect

• Comfort settings

• Turning your stove off

Maintaining Your Stove........................................18

• What you may need

• Where, when and how

Troubleshooting....................................................22

• Power related

• Blockage related

Support...................................................................27

• Contact information

• Ordering Parts

Listings and Certications...................................28

• Mobile home approval

• Glass specication

• Efciencies

• Stove dimensions

• Warranty

PelPro Cast Pellet Stove • 7093-600 • 07/13/16 pelprostoves.com4

Getting Started

WARNING!

Inspect appliance and components for damage.

Damaged parts may impair safe operation.

• Do NOT install damaged components.

• Do NOT install incomplete components.

• Do NOT install substitute components.

Report damaged parts to consumer care.

Getting Started

Pallet Removal

There are bolts holding your PelPro stove in place

on the pallet. To remove your stove from the pallet:

What’s Included

1 2

Using a 3/8” wrench,

remove each bolt by

reaching under your

stove. Tip your stove

to opposite side and

push bracket inward;

set stove down and

repeat on other side.

Using a 7/16” wrench,

remove all four bolts

attaching the shipping

bracket to pallet.

Owner’s

manual

Door handleCleaning tool Power cord

Pallet Removal

Visit pelprostoves.com

or scan this code.

Outside air kit

components:

2” Flex hose Termination Cap Hose clamp Screws (4)

CAUTION!

Risk of cuts, abrasions or ying debris. Wear

protective gloves & safety glasses during install.

Metal edges are sharp.

Online Installation &

Trouble Shooting Videos

PelPro Cast Pellet Stove • 7093-600 • 07/13/16pelprostoves.com 5

Getting Started

What You’ll Need

Tools & Supplies

• High temperature silicone

(500°F+)

• Level

• Phillips screwdriver

• Plumb line

• Tape measure

• Framing square

• Reciprocating saw

• Electric drill & bits

• Caulking gun

• Stud nder

• Utility knife

• Pliers

• Flashlight

• Hammer

Safety Equipment

Recommended for all installation and maintenance steps.

Pellet Vent Pipe

Must be an approved 3” or 4” diameter Type “L” or “PL” vent. Use 4” diameter vent if ue height

is over 15’ or if installation is over 3,000 ft. above sea level.

Floor Protection

Non-combustible material

(such as a hearth pad) is

required underneath your

stove.

Surge Protector

Protect the electrical

components of your stove

by using a surge protector.

Pellet Fuel

Use only wood pellets

in your stove. For best

performance, use

premium, low-ash pellets

(<1%) less than 1.5” in

length and avoid the dusty

bits and pieces of pellets

in the bottom of the bag.

WARNING!

Fire Risk. NO OTHER vent components may be used. Substitute or damaged vent components may

impair safe operation.

Gloves Safety Glasses Close-toed shoes

PelPro Cast Pellet Stove • 7093-600 • 07/13/16 pelprostoves.com6

Installing Your Stove

Your Home Acts Like a Chimney

We recommend that you help your home by:

1. Using a minimum of 5 feet of vertical venting

2. Use the supplied outside air kit

3. Install your stove on a main oor location

This will:

• Help your stove breathe

• Minimize smoke leakage in the house

• Enhance performance

Clearance to Combustibles

The space between your stove and the items in

your home that could burn. Materials such as:

• Wood

• Sheet rock (drywall)

• Carpet

Pro Tip

We highly recommend your stove and pellet vent pipe be installed by a professional installer. Your

retailer can make recommendations for you.

Installation MUST comply with local, regional, state and national codes and regulations.

Consult insurance carrier, local building inspector, re ofcials or authorities having jurisdic-

tion over restrictions, installation inspection and permits.

WARNING!

Asphyxiation Risk.

DO NOT INSTALL IN A SLEEPING ROOM. Consumes oxygen in the room.

For Canada, the installation must conform to CAN/CSA-B365

Placement

Where you place your stove can signicantly affect its performance and safety.

Getting Ready

PelPro Cast Pellet Stove • 7093-600 • 07/13/16pelprostoves.com 7

Installing Your Stove

REQUIRED:

Use only 3” or 4” type “L” or “PL” pellet pipe.

CAUTION

• Do not connect to any air distribution duct or system

• Do not install a ue damper in the exhaust venting system of this

stove

• Do not connect this stove to a chimney ue serving another

appliance

• The structural integrity of the manufactured home oor, wall and

ceiling/roof must be maintained

Installation Video

Visit pelprostoves.com or scan this code:

Pro Tip

This unit can be installed with a 3 to 6 inch (76-152mm) Top Vent Offset Adapter Kit. The 3

to 6 inch (76-152mm) Top Vent Offset Adapter are tested to use 24 gauge single wall ue

connector or Listed double wall ue connector to Class A Listed metal chimneys, or masonry

chimneys meeting International Conference of Building Ofcials (ICBO) standards for solid

fuel appliances.

Getting Ready (Continued)

Pellet Venting

Adding bends in the exhaust path restricts air ow,

reduces performance and provides a collection point

for ash deposits requiring more frequent cleaning.

PelPro Cast Pellet Stove • 7093-600 • 07/13/16 pelprostoves.com8

Installing Your Stove

Vent Termination Clearances

Installing Your Stove

Clearances

A 12” Clearance above grade, veranda porch, deck or balcony (Including vegetation and mulch)

12” with outside air kit

48” no outside air kit Clearance beside or below any windows or doors that open

12”* Clearance above any window or door that opens

C 18” Vertical clearance to ventilated soft located above the terminal within a horizontal distance of 2 feet from

the center line of the terminal

D 12” Clearance to an outside corner wall

F12” with outside air kit

48” no outside air kit

Clearance to a non-mechanical air supply inlet to the building or a combustion air inlet to any other

appliance

G 36” Clearance to a mechanical air supply inlet

H 84”** Clearance above a paved sidewalk or paved driveway located on public property

I 12”** Clearance under a veranda, porch, deck or balcony

J 12” Clearance above the roof

K 24” Clearance from an adjacent wall including neighboring buildings

36” within a height of 15

feet above the meter /

regulator assembly

Clearance to each side of center line extended above natural gas or propane meter / regulator assembly

or mechanical vent

Notice:

Do NOT terminate vent:

• In any location that will allow ue gases or soot from

entering or staining the building

• In any location which could create a nuisance or hazard

• In any enclosed or semi-enclosed area such as a

carport, garage, attic, crawl space, under a sun deck or

porch or narrow walkway

• Closely fenced area, or any location that can build up

a concentration of fumes such as a stairwell, covered

breezeway, etc.

Notice:

Do NOT terminate below an air inlet.

• It is recommended that at least 60” (1.52m) of vertical

pipe be installed when appliance is vented directly

through a wall—this will create a natural draft, which

will help prevent the possibility of smoke or odor

venting into the home during a power outage

• It will also keep exhaust from causing a nuisance

or hazard by exposing people or shrubs to high

temperatures

• The safest and preferred venting method is to extend

the vent vertically through the roof or above the roof

*Recommended to prevent condensation on windows and thermal breakage. **This is a recommended distance. For additional requirements check local codes.

PelPro Cast Pellet Stove • 7093-600 • 07/13/16pelprostoves.com 9

Installing Your Stove

Conrm required clearances to combustibles:

Notice: Be careful to protect the bottom of the stove

and oor surfaces when moving the stove. Bottom

edges of stove are sharp and can scratch surfaces.

Vertical Installations (Interior Flue)

Straight back against wall Inches mm

D Back wall to pellet pipe 3 76

E Side wall to stove 13 330

USA Hearth Pad Requirements Inches mm

A Sides 2 51

B Back 2 51

C Front 6 152

Horizontal Installations

Straight back against wall Inches mm

G Back wall to stove 2 51

E Side wall to stove 13 330

H Clearance to top of stove 7 178

J Clearance to front of stove 48 1219

Corner Installation

Straight back against wall Inches mm

F Walls to stove 3 76

Placing Your Stove

Stove must be installed on a non-combustible oor.

If needed, place oor protection (such as a hearth

pad) beneath the stove. Move stove from pallet onto

your non-combustible surface. Do not operate the

stove while it sits on the pallet.

Hearth pad minimum requirements:

Notice: Clearances may only be reduced by means

approved by the regulatory authority having jurisdiction.

Non-combustible oor protection extending beneath the ue pipe is required

with horizontal venting or under the top vent adapter with vertical installation.

*Non-combustible oor protection must extend 2 inches (51mm) beneath the

ue pipe when installed horizontal venting or under the top vent adapter with

vertical installation. CANADA REQUIRED, USA RECOMMENDED.

Canada Hearth Pad Requirements Inches mm

A Sides 8 203

B Back 2 51

C Front 6 152

PelPro Cast Pellet Stove • 7093-600 • 07/13/16 pelprostoves.com10

Installing Your Stove

Pro Tips

• See venting manufacturer’s required clearances to combustibles

• For horizontal installations, the minimum clearance from exterior to termination cap is 6”—you

may want to increase to 18” clearance to minimize soot blow back on home exterior.

Install venting. (For additional installation options visit pelprostoves.com)

Install wall thimble (sold separately) per manufacturer requirements.

Vertical - Interior, Preferred Installation

6 in.

(152mm)

Min.

Clean-out T

Firestop

Flashing

Rain Cap

Non-combustible Hearth Pad

12 in. (305mm) Minimum

Ceiling Support

Follow pipe manufacturer

listed clearance

Exterior - Optional Installations

Non-combustible

Hearth Pad

Wall Thimble

Horizontal

Termination Cap

Termination

Cap

6 in. (152 mm)

Minimum

6 in.

(152 mm)

Minimum

Clean Out T

Wall Thimble

6 in.

(152 mm)

Minimum

Venting Your Stove

CAUTION!

Take appropriate precautions to locate utilities within the wall and avoid contact.

WARNING!

Do not terminate venting in any enclosed or semi-enclosed area

such as: a carport, garage, attic, crawl space, under a sun deck

or porch, narrow walkway or closely fenced area, or any location

that can build up a concentration of fumes such as a stairwell,

covered breezeway, etc.

CAUTION!

Ensure that your stove venting terminates above

your stove. The following may occur:

• Your stove appliance will not draft properly

• Smoke may seep in your house

• Excessive sooting

Install vent at clearances specied by the manufacturer

Use silicone to create an effective vapor barrier at the location where the chimney or

other component penetrates to the exterior of the structure.

NOTE: In Canada when using a factory-built chimney it must be safety listed, Type UL103 HT (2100

F) CLASS “A” or

conforming to CAN/ULC-S629M, STANDARD FOR 650oC FACTORY-BUILT CHIMNEYS.

Mark and cut wall for venting penetration on exterior wall (if needed).

Autres manuels pour PPC90

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Pelpro Poêle à granulés

Pelpro

Pelpro Pelpro Series Manuel utilisateur

Pelpro

Pelpro FPP Step Top Freestanding Manuel utilisateur

Pelpro

Pelpro PP130-B Manuel utilisateur

Pelpro

Pelpro PP60 Manuel

Pelpro

Pelpro PP60 Manuel utilisateur

Pelpro

Pelpro PP60 Manuel utilisateur

Pelpro

Pelpro Freestanding Manuel utilisateur

Pelpro

Pelpro PP60 Manuel utilisateur

Pelpro

Pelpro FPP Manuel utilisateur

Pelpro

Pelpro PP130 Manuel utilisateur

Pelpro

Pelpro HHPP2 Manuel utilisateur

Pelpro

Pelpro PP130 Manuel utilisateur

Pelpro

Pelpro PP60 Manuel utilisateur

Pelpro

Pelpro PP130 Manuel utilisateur

Manuels Poêle à granulés populaires d'autres marques

SMG

SMG Comfort Bilt HP50GC Manuel utilisateur

Quadra-Fire

Quadra-Fire MTVI-E2-MBK Manuel utilisateur

Quadra-Fire

Quadra-Fire MTV-E2-CSB Manuel utilisateur

Palazzetti

Palazzetti JP Series Guide d'installation

Travis Industries

Travis Industries Avalon 900 PS Manuel utilisateur

Flame

Flame FP-45 Manuel utilisateur

Astra

Astra P-7 Manuel utilisateur

Heatilator

Heatilator ECO-ADV-PS35 Manuel utilisateur

Cadel

Cadel aquos 24 h2O Manuel utilisateur

vicenza

vicenza V4.5 Manuel utilisateur

MCZ

MCZ VIVO 90 COMFORT AIR 9 M1 Manuel technique

Quadra-Fire

Quadra-Fire 1000 Gold Manuel du propriétaire

Ferroli

Ferroli GEMMA Manuel utilisateur

pleasant hearth

pleasant hearth PH35PS Series Manuel utilisateur

Breckwell

Breckwell Tradition P24FS Manuel utilisateur

Quadra-Fire

Quadra-Fire CB1200M-MBK Manuel utilisateur

England's Stove Works

England's Stove Works 25-EP Manuel utilisateur

Avalon

Avalon Astoria Manuel utilisateur