Pegasus H400E Series Manuel utilisateur
i
H500B/C/ H400B/ H500E/C /
H400E Series
THERMAL TRANSFER/
DIRECT THERMAL
BARCODE PRINTER
USER’S MANUAL
Copyright Information
©2016 Zhuhai Hengquan Barcode equipment Co., Ltd.
The copyright in this manual, the software and firmware in the printer described
therein are owned by Zhuhai Hengquan Barcode equipment Co., Ltd. All rights reserved.
Information in this document is subject to change without notice and does not
represent a commitment on the part of Zhuhai Hengquan Barcode equipment Co., Ltd. No part of
this manual may be reproduced or transmitted in any form or by any means, for
any purpose other than the purchaser’s personal use, without the expressed
written permission of Zhuhai Hengquan Barcode equipment Co., Ltd.
ii
Agency Compliance and Approvals
CE CLASS A
EN 55022
EN 55024
FCC CFR Title 47 Part 15 Subpart B
ICES-003 Class A
GB-4953
GB9254 (CLASS A)
GB27625
IEC 60950-1
iii
Contents
1. Introduction ................................................. 1
1.1 Product Introduction ......................................................................................... 1
1.2 Product Features............................................................................................... 2
1.2.1 Printer Standard Features ...................................................................... 2
1.2.2 Printer Optional Features ....................................................................... 3
1.3 General Specifications...................................................................................... 4
1.4 Print Specifications .......................................... 4
1.5 Ribbon Specifications......................................... 4
1.6 Media Specifications.......................................... 5
2. Operations Overview .......................................... 6
2.1 Unpacking and Inspection ................................................................................ 6
2.2 Printer Overview................................................................................................ 7
2.2.1 Front View ............................................................................................... 7
2.2.2 Interior View ............................................................................................ 8
2.2.3 Rear View ................................................................................................ 9
3. Setup ..................................................... 10
3.1 Setting up the Printer ...................................................................................... 10
3.2 Loading the Ribbon......................................................................................... 11
3.3 Loading the Media........................................................................................... 15
3.3.1 Loading the Roll Labels ....................................................................... 15
3.3.2 Loading the Media in Peel-off mode (Option) ..................................... 18
3.3.3 Loading the Media in Cutter Mode (Option) ........................................ 20
3.3.4 External Label Roll Mount Installation (Option).................................. 21
4. LED and Button Functions..................................... 23
4.1 LED Indicator................................................................................................... 23
4.2 Regular Button Functions .............................................................................. 23
4.3 Power-on Utilities ............................................................................................ 24
4.3.1 Ribbon and Gap/Black Mark Sensor Calibration ................................ 24
4.3.2 Gap/Black Mark Calibration, Self-test and Dump Mode ..................... 25
4.3.3 Printer Initialization .............................................................................. 28
4.3.4 Set Black Mark Sensor as Media Sensor and Calibrate the Black Mark
Sensor ............................................................................................................ 29
4.3.5 Set Gap Sensor as Media Sensor and Calibrate the Gap Sensor...... 29
4.3.6 Skip AUTO.BAS .................................................................................... 30
5. Diagnostic Tool ............................................. 31
iv
5.1 Start the Diagnostic Tool ................................................................................ 31
5.2 Printer Function .............................................................................................. 32
5.3 Calibrating Media Sensor by Diagnostic Tool...................... 33
5.3.1 Auto Calibration.................................................................................... 33
5.4 Setting Ethernet by Diagnostic Utility (Option)..................... 34
5.4.1 Using USB interface to setup Ethernet interface................................ 34
5.4.2 Using RS-232 interface to setup Ethernet interface ........................... 35
5.4.3 Using Ethernet interface to setup Ethernet interface......................... 36
6. Troubleshooting ............................................. 38
6.1 Common Problems ......................................................................................... 38
7. Maintenance ................................................ 41
Revise History ................................................ 42
v
1. Introduction
1.1 Product Introduction
Thank you very much for purchasing ZHUHAI HENGQUAN barcode printer.
The H500B series printer features two durable gear-driven motors that are capable of handling
large capacity 300 meter ribbons and large rolls of media inside its sleek design. If the 5” interior
label capacity is not enough, simply add an external media roll mount and the H500B can easily
handle 8.4” OD rolls of labels designed for expensive industrial label printers.
The moveable sensor design can accept wide range of label media. All of the most frequently
used barcode formats are included. Fonts and barcodes can be printed in any one of the four
directions.
The H500B series printer is built-in the high quality, high performance MONOTYPE IMAGING®
True Type font engine and one CG Triumvirate Bold Condensed smooth font. With flexible
firmware design, user can also download the True Type Font from PC into printer memory for
printing labels. Besides the scalable font, it also provides a choice of five different sizes of
alphanumeric bitmap font, OCR-A and OCR-B fonts. By integrating rich features, it is the most
cost-effective and high performance printer in its class!
To print label formats, please refer to the instructions provided with your labeling software; if you
need to write the custom programs, please refer to the TSPL/TSPL2 programming manual that
can be found on the accessories CD-ROM or on ZHUHAI HENGQUAN website at http://www.
xprinter.net
Applications
o
Manufacturing & Warehousing
o
Parcel Post
Work in Progress
Item Labels
Shipping/ Receiving
Labels
Instruction labels
Agency labels
o
o
Small Office/ Home Office
Retail Marking
o
Healthcare
Price tags
Patient Identification
Pharmacy
Specimen Identification
1
Shelf labels
Jewelry tags
Supported bar code
Supported image
1D bar code
2D bar code
BITMAP,
BMP,
PCX
(Max. 256 colors
graphics)
Code 39,
Code 93,
Code128UCC,
Code128 subsets
A,B,C, Codabar,
Interleaved 2 of 5,
EAN-8, EAN-13,
EAN-128,
UPC-A, UPC-E,
EAN and UPC 2(5)
digits add-on, MSI,
PLESSEY,
POSTNET,
China POST,
GS1 DataBar,
Code 11
PDF-417,
Maxicode,
DataMatrix,
QR code,
Aztec,
GS1 DataBar
Composite code
1.2 Product Features
1.2.1 Printer Standard Features
The printer offers the following standard features.
Product standard feature
Thermal transfer printing
Direct thermal printing
ABS plastic enclosure
Position adjustable gap sensor
Position adjustable black mark sensor
Ribbon sensor
Head open sensor
USB 2.0 (full speed) interface
8 MB SDRAM memory
4 MB FLASH memory
microSD memory card reader for memory expansion up to 4
GB
Real time clock
One power switch, one feed button and LED
Standard industry emulations right out of the box including
Eltron®and Zebra®language support
Internal 8 alpha-numeric bitmap fonts
Fonts and barcodes can be printed in any one of the four
directions (0, 90,180, 270 degree)
Internal Monotype Imaging® true type font engine with one
CG Triumvirate Bold Condensed scalable font
Downloadable fonts from PC to printer memory
Downloadable firmware upgrades
Text, barcode, graphics/image printing (Please refer to the
TSPL/TSPL2 programming manual for supporting code
page)
2
203 dpi
models
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
300 dpi
models
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
1.2.2 Printer Optional Features
The printer offers the following optional features.
Product option feature
User Dealer Factory
options options options
LCD display (graphic type, 128x64 pixel) with back
light
Internal Ethernet print server (10/100 Mbps) interface
Serial RS-232C (2400-115200 bps) interface
Centronics interface
Peel-off module
Guillotine cutter module (Full cut and partial cut)
Paper thickness: 0.06~ 0.19mm, 500,000 cuts
0.20~ 0.25mm, 200,000 cuts
-
-
-
-
-
-
-
-
-
-
○
○
-
○
○
○
○
○
Note:
Except for the linerless cutter, all regular/heavy
duty/care label cutters DO NOT cut on media with glue.
External roll mount with 3” core (8.4 OD) label spindle
Extended plate for external roll mount
○
○
Bluetooth module (RS-232C interface)
-
-
○
3
1.3 General Specifications
General Specifications
Physical dimensions
Weight
Electrical
300 mm (D) x 230 mm (W) x 194 mm (H)
2.47 kg
External universal switching power supply
Input: AC 100-240V
Output: DC 24V 2.5A, 60W
Environmental condition Operation: 5 ~ 40˚C (41 ~ 104˚F), 25~85% non-condensing
Storage: -40 ~ 60 ˚C (-40 ~ 140˚ F), 10~90% non-condensing
1.4 Print Specifications
Print Specifications
Print head resolution
203 dpi models
203 dots/inch (8 dots/mm)
300 dpi models
300 dots/inch (12 dots/mm)
Printing method
Thermal transfer and direct thermal
Dot size
(width x length)
Print speed
(inches per second)
Print speed for peel
mode & cutter mode
Max. print width
Max. print length
0.125 x 0.125 mm
(1 mm = 8 dots)
H500B: 2, 3, 4
, 5
ips
H400B: 2, 3, 4, 5 ips
108 mm (4.25”)
2,794 mm (110”)
0.084 x 0.084 mm
(1 mm = 11.8 dots)
H500E: 1.5, 2, 3, 4 ips
H400E: 1.5, 2, 3, 4 ips
2, 3 ips
104 mm (4.09”)
1,016 mm (40”)
1.5 Ribbon Specifications
Ribbon Specifications
Ribbon outside diameter
Ribbon length
Ribbon core inside diameter
Ribbon width
Ribbon wound type
Max. 67 mm
300 meter
1 inch (25.4 mm)
Max. 110 mm
Min. 40 mm
Outside wound
4
1.6 Media Specifications
Media Specifications
203 dpi models
300 dpi models
Label roll capacity
Media type
Media wound type
Media width (label +
liner)
Media thickness (label
+ liner)
Media core diameter
127 mm (5”) OD
Continuous, die-cut, black mark, fan-fold, notch
Printing face outside wound & Printing face inside wound
Max. 118 mm (4.6”)
Min. 25.4 mm (1.0”)
Max. 0.254 mm (10 mil)
Min. 0.06 mm (2.36 mil)
25.4 mm~38 mm (1”~1.5”)
Label length
10~2,794 mm (0.39”~110”)
10~1,016 mm (0.39”~40”)
Note:
If your label length is less than 25.4mm (1”), we
recommend you to use the perforation at the gap for
easier tear away.
Label length (peeler
mode)
Max. 152.4 mm (6”)
Min. 25.4 mm (1”)
Label length (cutter
mode)
Gap height
Black mark height
Black mark width
Max. 2,794 mm (110”)
Min. 25.4 mm (1”)
Min. 2 mm (0.09”)
Min. 2 mm (0.09”)
Min. 8 mm (0.31”)
5
Max. 1,016 mm (40”)
Min. 25.4 mm (1”)
Ce manuel convient aux modèles suivants
4
Table des matières
Autres manuels Pegasus Lecteur de codes-barres
Manuels Lecteur de codes-barres populaires d'autres marques
POSMicro
POSMicro Datalogic PowerScan D7100 Manuel utilisateur
Marson
Marson MT780 Guide de configuration rapide
NCR
NCR RealPOS Manuel utilisateur
Motorola
Motorola SE3300 Guide de configuration rapide
Element
Element P130BT Manuel utilisateur
Motorola
Motorola Symbol LS3008 Manuel d'installation et d'exploitation
