Pecron E1000 Manuel utilisateur
User manual
Please read the manual carefully before you use!
Please keep the manual carefully so that you can check it for
usage in the future.
And please read the manual carefully to avoid unnecessary
damage of the portable power station.
PORTABLE POWER STATION E1000/E1500
Please read the following information before you use the
power unit.
To ensure the safety of use and avoid damage to the power
pack, please first read the Safety Precautions (pages 1-3)
and the Handling Precautions (page 3-5). Please also read
this manual carefully to ensure proper use of the portable
power station.
Please refer to this manual while using the power unit to
familiar with the use of the device.
When you reading this manual, please try to charge the
device and familiarize yourself with the operating procedures
of the power supply. This will give you a better understanding
of our power unit Please be sure to keep the manual so that
you can refer it again when you need it.
Please read the instructions carefully before use.
Our company does not assume any responsibility for any
damage to your equipment caused by incorrect use of the
power supply.
User Manual
Thank you for purchasing and using our products. In order
to ensure the safe and correct use of this product, please
read the user manual carefully before operating.
▇ This printed manual is a basic instruction manual.
▇ This manual only applies to portable power station
of E1000/E1500.
▇ Due to product improvement and upgrading, the
contents of product specifications and manuals may be
changed without notice.
▇ The images and screen shots used in this manual may
differ from the actual product.
▇ Copyright - it is strictly prohibited to copy the contents
of this manual without permission.
Editing routine in the manual
(Page **):Reference page for more information
:warnings about problems with the power supply
:Additional information
:Tips or advice for better use of the portable power station
:Suggestions for troubleshooting
Content
Safety Precautions 1
Handling Precautions (Reserve and Use of Equipment
Correctly) 3
List of the product 6
Product introduction 7
Product specifications 8
Introduction of the parts and functions 9
Operation instructions and precautions 11
How to charge the battery 12
How to use DC output 16
Misuse and countermeasures 17
Warranty and after-sale service 18
Certificate of qualification 20
Statement for poisonous and harmful substance of the
power unit 21
Copyright 22
How to use AC output 14
..............................................................
.................................................................................
.................................................................
............................................................
............................................................
.............................
...................................................
............................................................
........................................................
.............................................
...........................................
...................................................
...............................................................................
.............................
..................................................................................
1
Safety Precautions
To protect yourself and others from harm and to protect
your equipment from damage, please read all the following
information carefully before using your equipment.
Warnings:
1.Do not put the battery in the fire or heat the power and
do not store the power in high temperature environment.
2.Do not put the power supply into the water. Keep it in a
cool and dry place during storage.
3.Do not use the power supply in flammable or explosive
environments such as gasoline, gas, chemical preparations,
or mines, as this may endanger your safety.
• Operate according to regulations, instructions and signs
in potentially explosive environments.
• Do not store or carry flammable liquids, gases, or
explosive materials in boxes that is containing power
supplies and power accessories.
4.Do not use the power supply in a corrosive environment,
otherwise the power supply may be damaged.
5.Do not apply paint or stickers to the power supply. Paints
and stickers can clog equipment parts and prevent proper
use. If you are allergic to paint or metal parts of your
equipment, it may cause itching, eczema, or skin swelling.
When this happens, please stop using and see a doctor.
2
6.Make sure that the heat dissipation is at least 5cm around
the power supply.
7.Do not disassemble, modify or repair the power supply.
Any changes or modifications made to the equipment will
not be warranted by the manufacturer. For repairs, please
contact the dealer where you purchased the product.
8.Do not use a charger that is not approved by the
manufacturer to charge the power supply.
9.Do not use the device in thunderstorms. This maybe
cause the malfunction of the device and maybe increase
the risk of electric shock.
10.Handle and dispose of power and its charging adapter
carefully.
• Use only chargers that are specifically designed for the
device and approved by our company. Unmatched chargers
may cause danger or damage the device.
• Do not throw battery into fire. When disposing of waste
power, please comply with local and national regulations.
• Do not place the battery or device inside or on top of a
heating device (such as a microwave oven, oven, or radiator).
Battery overheating may explode.
• Do not squeeze or puncture the power supply and battery.
Do not subject the battery to external high voltage, which
may cause internal short circuit and overheating.
11.Protect the power supply and charger from damage.
• Avoid exposing the power supply to extremely cold or hot
temperatures.
3
• Extreme temperatures can damage the device, reduce its
charging capacity, and shorten the life of the power supply.
• Do not use a damaged charger.
Handling Precautions (Custody and Use of
Equipment Correctly)
Keep the power supply dry
• Moisture and liquids can damage equipment components
or circuits。
• Do not switch on the device when it is wet. If the device
is turned on, turn it off immediately (if the device does not
turn off, please maintain the status quo).
• If the liquid enters the power source, it will damage the
internal parts of the device, and the manufacturer will not
guarantee this.
Do not use or store equipment in dusty or dusty areas
Dust can cause equipment malfunction, fire or electric shock.
Equipment can only be stored on a flat surface
If the device falls, it will be damaged
Do not store the device in hot or cold places. Use the
equipment within the range between -20°C and 45°C
• If the device is placed in a closed vehicle, the device may
4
be in a dangerous state because the internal temperature
of the vehicle can reach as high as 80°C during the summer.
• Do not expose the power supply to direct sunlight for
long periods of time, such as on the dashboard of a car.
• When charging the power supply, the operating
temperature should be guaranteed between 0 °C and 45 °C
Do not store equipment near or inside water heaters,
microwave ovens, hot cooking equipment or high pressure
vessels
• Equipment may be overheated and this many cause a fire.
Do not slide or crash the device
• This may damage the device's screen. If you bend or
deform it, it may damage the device or the part may
malfunction.
When cleaning equipment
• Wipe the device or charger with a towel or eraser
• Do not use chemicals or cleaners
How to ensure maximum life for the battery and charger
• If the multi-functional emergency power pack is idle for a
long time, the power of the battery may be run out.
Therefore, please make sure to charge the power supply
every 6 months.
• After long-term storage, when using the power again,
please fully charge it first. (the power display will show,
5
100% for the battery capacity, but the actual battery power
will be less than 100% due to self-consumption of the
battery, and the long-term loss of the control panel )
• When the charger is not in use, please disconnect the
power.
• Battery can only be used for specific purposes.
• To make the battery life longer, please don't run off the
power of the battery to 0% when using it, and it's better to
recharge it when the battery is 10% remaining.
Please use original accessories of our company to ensure
the best performance.
• Our company will not be responsible for any damage to
the product or any accidents (such as fire) caused by using
accessories that are not original from the company.
(such as battery leakage or explosion)
• Please note that any failure of this product caused by the
use of accessories that are not original is not covered by
the warranty of this product, but the user can pay for repairs.
• Our company will not take any responsibility for the
malfunction or accident caused by using an incompatible
charger or product.
If there is any malfunction, problem or damage to this
product, please contact the dealer where you purchased
the product.
Autres manuels pour E1000
1
Table des matières
Autres manuels Pecron Chargeur de batteries
