Pebbell PEBBELL v2 Manuel utilisateur
©HoIP Telecom, 2017 Publication number PEBBELL_v2_VF10.3_4402.1625
USER MANUAL
STARTING PEBBELL 2
1
STARTING PEBBELL™v2
Thank you for purchasing PEBBELL v2 GPS. PEBBELL v2 is especially built for real time monitoring
and can be used in all areas of life from travelling and lone worker protection to specialized care
and security services. It is suitable for children, the elderly, people suffering from dementia,
patients but also outdoorsmen, sportsmen etc.
Using latest advanced GPS and wireless technology combined
with IPX6 waterproofness and an innovative miniature size,
it increases safety and reduces stress.
When needed, you can, communicate your PEBBELL’s exact
position. You can request location, set tracking and area
tracking of the device(s), and view your PEBBELL’s position
on the map. PEBBELL can be used with any smartphone and
you do not need to install any applications**. The device is
designed for use on the 850/900/1800/1900 MHz mobile
networks. You can use it also in all countries worldwide where
HoIP Telecom has a SIM roaming contract.
(**exception: Live Tracking Android and IOS Mobile Client).
STARTING PEBBELL 2
2 –www.pebbell-gps.com
Information in this User manual is subject to change without notice.
HoIP Telecom reserves the right to change or improve their products and make changes in the
content without obligation to notify any person or any organization of such changes or
improvements. HoIP Telecom is not responsible for any loss of data, income or any consequential
damage whatsoever caused.
Some of the features described in this User Manual may be optional and intended to be purchased
separately. For details, please contact HoIP Telecom or your local reseller.
For more information, details and descriptions, including device configuration and assortment of
chargers and accessories, please visit the web site: http://www.pebbell-gps.com, or contact your
PEBBELL country dealer.
HoIP Telecom warrants its products to be free of defects in material or workmanship when leaving
the factory. For details, see the warranty terms at: http://www.pebbell-gps.com/warranty-terms.
PEBBELL™is a registered trademark of HoIP Telecom.
Correct disposal of this product: The PEBBELL device(s) should not be disposed with household or
other commercial waste. Remove the battery from the device and dispose it according to local
battery recycling laws.
STARTING PEBBELL 2
3
Please read this document before using the product. Neglecting the rules may be dangerous or
illegal. Further detailed information is given in this manual.
Do not switch on the product when wireless phone use is prohibited or may cause
interference or danger.
Do not use the product in hospitals. Follow the hospital regulations or rules. Switch off the
product near medical equipment.
Do not use the product on aircrafts. Wireless devices can cause interference in aircraft.
Do not use the product at a refuelling point. Do not use the product near fuel or chemicals.
Do not use the product where blasting is in progress. Observe restrictions and follow any
regulations or rules.
Never try to disassemble or service the product. Only qualified personnel may repair the product.
Use only approved accessories and batteries. Do not connect incompatible battery charger or
charge other devices with the PEBBELL GPS charger. A wrong charger may damage the device.
-We wish you enjoyable moments with PEBBELL v2-
STARTING PEBBELL 2
4 –www.pebbell-gps.com
RECOMMENDED PACKAGE CONTENT IN UK
PEBBELL v2
Desktop Docking Charger
AC Charger Adapter
USB Charging Cable
STARTING PEBBELL 2
5
①GETTING TO KNOW YOUR DEVICE
STARTING PEBBELL 2
6 –www.pebbell-gps.com
②DEVICE CHARGING
The PEBBELL v2 device is equipped with an internal rechargeable battery. The autonomy of the
battery may vary depending on the GPS and GSM activity and the use of the device.
When charging for the first time use, please fully charge the battery for around 2-3 hours, using
the USB charger or the docking station.
oPlace the device on the docking station.
oConnect the Micro USB side of the cable to the docking
station port and connect the other end of the cable to
the designated AC power source (USB/AC adaptor).
oWhen charging, the RED LED (on the docking station)
will be blinking. After the device has been fully charged,
the RED LED WILL BE SOLID DIM.
NOTE: A wrong charger may damage the device. Use only the
original PEBBELL charger. The ideal temperature range for
charging is between +10°C and +30°C. The battery life might
be shortened if charging the battery outside of this temperature
range.
STARTING PEBBELL 2
7
LOW BATTERY ALARM
When the unit’s battery is less than 15%, it will send an SMS alarm “BAT: LOW!” to all authorized
numbers. If the battery is less than 15%, the blue light will flash rapidly to advise the user to
charge the device as soon as possible.
③SWITCHING ON THE DEVICE
To turn on the device: Press the side
power button for 1 second, all the LEDs
will flash rapidly.
Device can also be turned on
automatically by charging via USB or
placing in on the docking station.
To get an initial first location, stay
outdoors or near a window so the device
can fix itself onto the satellites.
④SWITHCING OFF THE DEVICE
To turn off the device: Press and hold the
side button and SOS button together for 1 second until the LEDs turn off
STARTING PEBBELL 2
8 –www.pebbell-gps.com
⑤WHAT DO THE LIGHTS MEAN?
POWER STATUS - LED
LED
Blue ON (solid)
Blue blinking quickly
Blue OFF or blinking slowly
STATE
The device is charging
Battery power is lower than 15%
Device has been fully charged or it’s not
charging
GSM LED –GREEN
LED
Light shows a rapid single flash
every 3 seconds
Light shows a rapid double
flash every 3 seconds
Light shows a slow flash
every 3 seconds
Light solid (not
flashing)
STATE
The device is connected to the
GSM network
The device is registered to
the GPRS network
The device is connecting
to the GSM network
No SIM card is
detected
GPS LED - BLUE
LED
Light shows a rapid single
flash every 3 seconds
Light shows a slow flash every 3 seconds
(1 second ON and 3 seconds OFF)
Blue OFF (when device not charging)
STATE
The device has a GPS
positioning fix
The device has NO GPS position fix
The GPS chip is sleeping
STARTING PEBBELL 2
9
⑥SETTING THE AUTHORIZED NUMBERS (A, B and C)
①Send SMS command: A1
NOTE: No spaces in the text, case-insensitive.
Using your mobile phone, send SMS with a text A1 to the phone number of the device. It
will reply: “Set mobile number 1 OK!”
To delete this number, send command A0 to the Pebbell.
NOTE: It is not mandatory for all three of the authorized
numbers to be set, however a minimum of one must
always be set.
②Send SMS command: B1,phone number (Example: B1, +447624123456)
Using your mobile phone, example send B1,+447624123456 to the phone number of the
device. It will reply: “Set mobile number 2 OK!”
To delete this number, send command B0 to the PEBBELL
③Send SMS command: C1,phone number (Example: C1, +447624987654)
Using your mobile phone, example send C1,+447624987654 to the phone number of the
device. It will reply: “Set mobile number 3 OK!”
To delete this number, send command C0 to the PEBBELL
Table des matières
