Fountain Crescent T: +44 (0)141 812 8100 Part No. IG-Precision
Inchinnan Business Park F: +44 (0)141 812 8200 Rev. 01
Inchinnan, PA4 9RE W: www.peakscientific.com
Scotland, UK E: info@peakscientific.com Page Page 6 of 8
It is recommended that the unit is left to
run for 12 hours before utilisation.
CONGRATULATIONS
Your PEAK SCIENTIFIC gas generator is now
fully installed, operational and ready to supply
gas on demand to your instrument.
General Notes
* The generator will operate on voltages of 110VAC +/- 10%. This means it will operate
between 103V and 126V. It is okay to operate the generator on a mains voltage
between 103V and 126
V for a short period of time, however we would recommend fitting
the listed transformer at your earliest convenience.
For all other technical specifications, operating instructions, service
requirements, contact details and trouble shooting, please refer to
the user manual contained on the CD supplied in the fittings kit.
Please keep this for future reference.
It is very important to register your generator with PEAK SCIENTIFIC. This will initiate
your warranty entitlement. Please use the form on the next page to register your
generator. You will need the generators serial number which can be found on the serial
label on the rear of the generator.
