Partner CD-7220 Manuel utilisateur
PT 9000/9000m PT 9150
CD-7220 Power & Setup
•JP8 – Powers COM 1(A)
•JP10 – Powers COM 4(D)
•JP9 – Powers COM 3(C)
•JP3 – CMOS
Pin assignments: 1 & 2 12 Volts
3 & 4 Off (Default)
5 & 6 5 Volts
This is used for powering up stand alone Customer Displays that do not have the
external power supply adapter.
Please note that a printer should not be hooked up with a COM Port that is powered up
CD-7220 Quick-Setup
1) Choose com port.
2) Baud Rate that is desired. CD-7220 has a default of 9600.
3) Select Parity. CD-7220 is set to N,8,1
4) Command Type that the pole display unit communicates with the software or
Apps. UTC Standard is the standard for most Epson and other pole displays.
*Note that other software’s have different emulations and be advised to check
software specifications as well.
5) If unit does not respond or power up you may Reset Display. This will write
information back to the EEPROM and will load default values to the unit.
6) Click Reset Display if you need to rest EEPROM.
Please read CD-7220 manual for more information on RS-232 commands and setup.
Autres manuels pour CD-7220
1
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels Partner Moniteur
Partner
Partner CD-70 Manuel utilisateur
Partner
Partner CD-7220 Manuel utilisateur
Partner
Partner LM12 Series Manuel utilisateur
Partner
Partner Customer Pole Display CD-5220 Manuel utilisateur
Partner
Partner CD-8220 Manuel utilisateur
Partner
Partner SPM-185 Series Manuel utilisateur
Partner
Partner VM-8 Manuel utilisateur
Partner
Partner Customer Pole Display CD-5220 Manuel utilisateur
Partner
Partner PT-6515-E Manuel utilisateur
Partner
Partner SP-800 Manuel
