Parkside PSHL 2 C1 Manuel utilisateur

GB IE NI

FR BE

DE AT CH

NL BE

IAN 315776_1904

AUTOMATIC WELDING HELMET

MASQUE DE SOUDAGE

AUTOMATIQUE

AUTOMATIK-SCHWEIßHELM

AUTOMATISK SVEJSEHJELM

AUTOMAAT-LASHELM

Operation and Safety Notes

Translation of the original instructions

Consignes d’utilisation et de sécurité

Traduction du mode d’emploi d‘origine

Bedienungs- und Sicherheitshinweise

Originalbetriebsanleitung

Brugs- og sikkerhedsanvisninger

Oversættelse af den originale driftsvejledning

Bedienings- en veiligheidsinstructies

Vertaling van de originele bedieningshandleiding

AUTOMATIC WELDING HELMET PSHL 2 C1

BEDK

NIIEGB

Før du læser, vend siden med billeder frem og bliv bekendt med alle apparatets funktioner.

Avant de lire le document, allez à la page avec les illustrations et étudiez toutes les fonctions

de l’appareil.

Klap, voordat u begint te lezen, de pagina met afbeeldingen uit en maak u aansluitend ver-

trouwd met alle functies van dit apparaat.

DE AT

Klappen Sie vor dem Lesen die beiden Seiten mit den Abbildungen aus und machen Sie sich

anschließend mit allen Funktionen des Gerätes vertraut.

GB/IE/NI Operation and Safety Notes Page 5

DK Brugs- og sikkerhedsanvisninger Side 21

FR/BE Instructions de montage, d’utilisation et consignes de sécurité Page 37

NL/BE Bedienings- en veiligheidsinstructies Pagina 55

DE/AT/CH Bedienungsanleitung und Sicherheitshinweise Seite 73

Before reading, unfold the page containing the illustrations and familiarise yourself with all

functions of the device.

1234 5

Automatic welding helmet PSHL 2 C1 (ﬂames)

Automatisk svejsehjelm PSHL 2 C1 (Flammer)

Masque de soudage automatique PSHL 2 C1 (Flammes)

Automaat-lashelm PSHL 2 C1 (Vlammen)

Automatik-Schweißhelm PSHL 2 C1 (Flammen)

1 2

4 5

818

12 9 11

Automatic welding helmet PSHL 2 C1 (black)

Automatisk svejsehjelm PSHL 2 C1 (Sort)

Masque de soudage automatique PSHL 2 C1 (Noir)

Automaat-lashelm PSHL 2 C1 (Zwart)

Automatik-Schweißhelm PSHL 2 C1 (Schwarz)

19 19

GB/IE/NI 5

List of pictograms used..................................................................................Page 6

Introduction .........................................................................................................Page 6

Intended use ...........................................................................................................Page 6

Package contents....................................................................................................Page 6

Parts description for "ﬂames" model ......................................................................Page 7

Parts description for "black" model ........................................................................Page 7

Technical speciﬁcations for "ﬂames" model............................................................Page 7

Technical speciﬁcations for "black" model .............................................................Page 7

Safety instructions............................................................................................Page 8

Using the device................................................................................................Page 12

Replacing the UV ﬁlter............................................................................................Page 13

Troubleshooting.................................................................................................Page 14

Cleaning and maintenance..........................................................................Page 15

Storage..................................................................................................................Page 15

Information about recycling and disposal...........................................Page 15

Meaning of the marking...............................................................................Page 15

EU Declaration of Conformity .....................................................................Page 16

Warranty and service information ..........................................................Page 18

Warranty conditions...............................................................................................Page 18

Warranty period and statutory claims for defects ..................................................Page 19

Extent of warranty ..................................................................................................Page 19

Processing of warranty claims ................................................................................Page 19

Service....................................................................................................................Page 20

Table of contents

6 GB/IE/NI

Automatic welding helmet

PSHL 2 C1

Introduction

Congratulations! You have

purchased one of our high-quality

devices. Please familiarise yourself with the

product before setup or ﬁrst use. To do so,

please read through the following operating

and safety instructions carefully. This product

must be set up or used only by people who

have been trained to do so.

KEEP OUT OF THE REACH OF

CHILDREN!

 Intended use

When welding, this welding helmet protects

the eyes and face from sparks, splashes and

UV radiation and automatically adjusts to

the lighting conditions. It ensures immediate,

sensor-controlled darkening when the arc is

ignited as well as automatic lightening when

welding work is ﬁnished (including short

delay for protection against afterglow). The

welding helmet has an inﬁnitely adjustable

DIN protection level and can also be set for

ﬂying sparks during grinding work. Use the

product only as described and only for the

speciﬁc applications as stated. Keep these

instructions in a safe place. Ensure you hand

over all documentation when passing the

product on to anyone else. Any use that

differs to the intended use as stated above

is prohibited and potentially dangerous.

Damage or injury caused by misuse or disre-

garding the above warning is not covered by

the warranty or any liability on the part of the

manufacturer.

The device has been designed for household

use only and must not be used in commercial

or industrial applications. Commercial use

will void the guarantee.

 Package contents

1 Automatic welding helmet

1 set of operating instructions

List of pictograms used /Introduction

List of pictograms used

Caution!

Read the operating instructions! Warning: Potential hazards!

Do not dispose of any electrical

devices in domestic waste! Important note!

Attention: Welding helmets do

not offer any form of protection

for the eyes, ears or face!

Attention: Arc beams can dam-

age the retina of the eye!

Made from recycling material Dispose of batteries in an envi-

ronmentally friendly manner!

Dispose of packaging properly.

Do not dispose of the appliance

in household waste!

Direct current

GB/IE/NI 7

Introduction

 Parts description for

"ﬂames" model

Viewing pane

Helmet casing

Solar cell

Rear lens

Headband

Rear control dial on headband

Lateral control dial on headband

UV ﬁlter

Darkening control

Test button

Delay setting

Sensitivity setting

Low battery display

LED light switch

Battery compartment

Bracket

Arc sensor

 Parts description for

"black" model

Viewing pane

Helmet casing

Solar cell

Rear lens

Headband

Rear control dial on headband

Lateral control dial on headband

UV ﬁlter

Darkening control

Test button

Delay setting

Sensitivity setting

Low battery display

LED light switch

Battery compartment

Arc sensor

Viewing pane bracket

Filter bracket

Darkening switch

 Technical speciﬁcations for

"ﬂames" model

Filter cassette size:

110× 90x 10 mm

Field of vision: 9.2 x 4.2 cm

Light condition: DIN 4

Dark condition: DIN 9–DIN 13

Cycle times

Light to dark: 0.23~0.72 ms

Dark to light: 0.2~0.6 s

Switching on/off: Fully automatic

Energy supply: Solar cell

UV/IR protection: DIN 16

Operating temperature:

-5°C to +55°C

Storage temperature: -20°C to +70°C

Welding processes: MMA, MIG, MAG,

TIG, plasma cutting

and plasma welding

Maximum service life: approx. 6 years

 Technical speciﬁcations for

"black" model

Filter cassette size

115× 115x 10 mm

Field of vision: 9.2 x 4.2 cm

Light condition: DIN 4

Dark condition: DIN 5-8/ DIN 9-13

Cycle times

Light to dark: 0.23~0.72 ms

Dark to light: 0.15~0.45 s

Switching on/off: Fully automatic

Energy supply: Solar cell

UV/IR protection: DIN 16

Operating temperature:

-5°C to +55°C

Storage temperature: -20°C to +70°C

Welding processes: MMA, MIG, MAG,

TIG, plasma cutting

and plasma welding

Maximum service life: approx. 6 years

8 GB/IE/NI

Safety instructions

Safety instructions

Please read the operating instruc-

tions with care and observe the

notes described. Familiarise your-

self with the device, its proper

use and the safety notes based

on these operating instructions.

The rating plate contains all tech-

nical data of this welding helmet;

please learn about the technical

features of this product.

 Prior to each use, check that it

is working properly by pressing

the "Test" button.

 The product is not suitable for

laser welding.

 The product is only approved for

use within a temperature range

of between -5°C to +55°C.

 The product is not ﬁre-resistant.

 Welding helmet and ADF ﬁlter

must not be exposed to any

heat or moisture.

 Do not remove the ADF ﬁlter

from the welding helmet and

never open the housing of the

ADF ﬁlter without authorisation

from the manufacturer.

 Prior to each use, check

whether the Welding/Grinding

setting was selected correctly.

 The cover lens must be installed

on the outer side of the ADF

ﬁlter. Otherwise, the ADF ﬁlter

can get damaged.

 Do not carry out any modiﬁ-

cations/replacements on the

welding helmet and ADF ﬁlter

without consent.

 If the ﬁlter does not darken

automatically whilst weld-

ing please stop the operation

immediately and contact the

dealers without delay.

 Do not use any alcohol, fuel

or diluting agents to clean the

ADF ﬁlter. Do not place the

ADF ﬁlter in water.

 The response time of the ADF

liquid crystal slows down if the

ambient temperature is lower,

however this does not have

an impact on the protective

functions.

 Please replace the housing

of the ADF ﬁlter immediately

if it is damaged or scratched

because this can impair

visibility and the protective

performance.

 Please replace the viewing

pane immediately if it is

broken or scratched. Do not

use any hard objects to replace

the viewing pane of the ﬁlter.

 Regularly clean the surfaces

of the ADF ﬁlter, sensor and

solar cells.

GB/IE/NI 9

 The welding helmet cannot

withstand any damages that

are caused by a heavy blow,

explosion or abrasive liquids.

 The useful life depends on

many different individual fac-

tors such as usage, cleaning,

storage and maintenance.

Regular inspections and

replacement in the case of

damage are recommended.

 The material used to manufac-

ture the product will age over

time. This can result in break-

ages on the welding helmet,

for example. As a result of

these damages, the welding

helmet is no longer able to

provide effective protection.

In this case, the user should

replace the welding helmet

immediately.

 This product cannot be used for

overhead welding work and

cutting operations. If this prod-

uct is use for overhead weld-

ing or cutting, the molten metal

drops could burn through the

ADF ﬁlter and result in injuries

to the user.

 If the ﬁlter is faulty, the user

must stop using the welding hel-

met immediately. Slag splashes

can damage the surface of the

ﬁlter and cause injury to the

user’s skin or cause other

serious accidents.

 This product is temperature

resistant and hardly inﬂamma-

ble but in case of direct contact

with naked ﬂames or in case

of access to an object with a

high temperature, the helmet

may begin to burn or melt.

Please store and only use the

welding helmet in the manner

described in order to reduce

such risks.

 The ADF ﬁlter is an electronic

product that is not waterproof.

Please ensure it is kept dry and

clean and not stored in a damp

environment.

 Improper use could result in

injury to the use and cause

other types of diseases.

 Please examine the ﬁlter prior

to each use. As soon as the

function and appearance seem

defective, they must no longer

be used.

 The use of the welding

helmet is prohibited if the ﬁlter

ﬂickers or if the level of dark-

ening no longer corresponds

to the standard value or there

are other abnormal working

conditions.

Safety instructions

10 GB/IE/NI

 Please do not expose this

product to unnecessary solar

radiation.

 Please only use original spare

parts. The use of non-original

parts can cause problems with

regard to the protective func-

tion, serviceability and degree

of product protection.

 Exceeding the service life

(insufﬁcient protection) – please

check the protective glasses

prior to each use for damage

and durability.

 Using eye protection without

the ﬁlter effect against radia-

tion (damages the eyes) – prior

to each use check whether

the eye protection exhibits the

necessary scale number.

 Using the product against

splashes (insufﬁcient protection)

– always check whether the

correct protective effect is

present.

 Using the product for protection

against large dust particles

(injury, accident). The eye pro-

tection equipment must only be

used for the work described in

the operating instructions. Any

deviation from the instructions

in the operating instructions can

result in injuries or accidents.

 Using damaged products

(insufﬁcient protection) – prior

to each use check the protec-

tive glasses for damage and

durability.

 Improper use of the eye protec-

tion (injury, accident). The eye

protection device must only be

used for the work described

in the operating instructions.

Any deviation from the instruc-

tions can result in injuries or

accidents.

 This device may be used by chil-

dren aged 16 years and older,

and by persons with reduced

physical, sensory or mental

capacities, or a lack of expe-

rience and knowledge, if they

are supervised or have been

instructed in how to use the

device safely and understand

the dangers that may arise

when using it. Do not allow

children to play with the device.

Cleaning and day-to-day main-

tenance must not be performed

by children without supervision.

 The welding helmet with

auto-darkening is not suitable

for laser and autogenous

welding.

 Never place the welding

helmet on hot surfaces.

Safety instructions

Autres manuels pour PSHL 2 C1

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Parkside Accessoires de soudage

Parkside

Parkside 85053 Manuel utilisateur

Parkside

Parkside 85053 Manuel utilisateur

Parkside

Parkside PSHL 2 C1 Manuel utilisateur

Parkside

Parkside PSHL 2 C1 Manuel utilisateur

Parkside

Parkside PSHP 1 A1 Manuel utilisateur

Parkside

Parkside 85053 Manuel utilisateur

Parkside

Parkside PSHL 2 D1 Manuel utilisateur

Manuels Accessoires de soudage populaires d'autres marques

Lincoln Electric

Lincoln Electric LT-7 Tractor Manuel utilisateur

Weco

Weco Trolley R Manuel utilisateur

Cornwell Tools

Cornwell Tools MMWC1 Manuel utilisateur

Dohle

Dohle ExOn2A Manuel utilisateur

Nederman

Nederman Fume Eliminator FE 840/2500/P150 Manuel utilisateur

3M Speedglas 9100 Series Manuel utilisateur

Miller Electric

Miller Electric OM-842 Manuel utilisateur

Miller

Miller A-200 Series Manuel utilisateur

Abicor Binzel

Abicor Binzel ABIMIG WT Series Manuel utilisateur

optrel

optrel lifeflip autopilot Manuel utilisateur

Miller

Miller MIGmatic M-25 Manuel utilisateur

Tregaskiss

Tregaskiss TOUGH GUN TT3 Reamer Manuel utilisateur

Abicor Binzel

Abicor Binzel xFUME PRO Manuel utilisateur

Sealey

Sealey SR20.V2 Manuel utilisateur

iWeld

iWeld NORED EYE Manuel utilisateur

Sthor

Sthor 74483 Manuel utilisateur

Leister

Leister TWINNY T7 Manuel utilisateur

Miller

Miller I-22 CE Manuel utilisateur