Parkside PDKS 6.3 B3 Manuel utilisateur
AIR SAW PDKS 6.3 B3
DRUCKLUFT-SÄGE
Originalbetriebsanleitung
IAN 339157_1910
AIR SAW
Translation of the original instructions
FERĂSTRĂU PNEUMATIC
Traducerea instrucţiunilor de utilizare original
PNEUMATSKA TESTERA
Prevod originalnog uputstva za upotrebu
ΣΈΓΑ ΑΈΡΟΣ
Μετάφραση των αυθεντικών οδηγιών
λειτουργίας
GB/CY Translation of the original instructions Page 1
RS Prevod originalnog uputstva za upotrebu Strana 27
RO Traducerea instrucţiunilor de utilizare original Pagina 53
GR/CY Μετάφραση των αυθεντικών οδηγιών
λειτουργίας Σελίδα 79
DE/AT/CH Originalbetriebsanleitung Seite 105
Before reading, unfold the page containing the illustrations and familiarise
yourself with all functions of the device.
Pre čitanja rasklopite obe strane sa slikama te se upoznajte sa svim funkcija-
ma uređaja.
Înainte de a citi instrucţiunile, priviţi imaginile şi familiarizaţi-vă cu toate
funcţiile aparatului.
Πριν ξεκινήσετε την ανάγνωση, ανοίξτε τη σελίδα με τις εικόνες και
εξοικειωθείτε με όλες τις λειτουργίες της συσκευής.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen
Sie sich anschließend mit allen Funktionen des Gerätes vertraut.
6x
PDKS 6.3 B3 GB│CY │ 1 ■
Contents
Introduction...................................3
Intended use..........................................3
Features .............................................4
Package contents ......................................5
Technical specifications .................................5
General safety instructions ......................7
Hazards caused by flying parts ...........................8
Hazards caused by entanglement .........................8
Hazards during operation ...............................8
Hazards caused by repetitive movements ..................10
Hazards caused by accessories..........................10
Hazards in the workplace ..............................11
Hazards caused by dust and vapours .....................12
Hazards caused by noise...............................13
Hazards caused by vibrations ...........................14
Additional safety instructions for pneumatic machines.........15
Before use ...................................16
Lubrication ..........................................16
Topping up the oil ....................................17
Connecting to a compressed-air source ....................17
Fitting/changing the saw blade ..........................18
Adjusting/changing the stop bracket ......................18
Operation ...................................19
Switching on and off ..................................19
PDKS 6.3 B3
■ 2 │ GB│CY
Maintenance, cleaning and storage ..............19
Disposal.....................................21
Kompernass Handels GmbH warranty ...........22
Service ......................................25
Importer ....................................25
Translation of the original Conformity Declaration..26
PDKS 6.3 B3 GB│CY │ 3 ■
AIR SAW PDKS 6.3 B3
Introduction
Congratulations on the purchase of your new appliance. You have
chosen a high-quality product. The operating instructions are part of
this product. They contain important information about safety, usage
and disposal. Before using the product, please familiarise yourself
with all operating and safety instructions. Use the product only as
described and for the range of applications specified. Please also
pass these operating instructions on to any future owner.
Intended use
The appliance is suitable for manual use in car body construction,
automotive and workshop areas. The user should protect him-/herself
with protective goggles against fragments and with gloves against
accidental contact with sharp edges. Retain these instructions for
future reference. Please also pass these operating instructions on
toany future owner(s). Any other usage or modification of the
appliance is deemed to be improper and carries a significant risk of
accidents. The manufacturer accepts no responsibility for damage(s)
resulting from improper usage. This appliance is intended for
domestic use only.
PDKS 6.3 B3
■ 4 │ GB│CY
Symbols on the compressed-air tool
WARNING!
Read the operating instructions before use.
Always wear eye protection when using or servicing the
compressed-air saw.
Always wear a dust mask in situations in which dust is
being generated.
Always wear ear muffs.
Oil daily
Features
Stop bracket
Connector nipple (pre-assembled)
Trigger lock
Trigger
Hexagon socket screw (for the saw blade holder)
Cover
Screw (for the cover)
Hexagon socket screw (for the stop bracket)
Saw blade
Saw blade holder
Spare stop bracket
Hex key (2 mm)
Hex key (4 mm)
Saw blades
PDKS 6.3 B3 GB│CY │ 5 ■
Package contents
1 air saw
1 spare stop bracket
1 hex key (2 mm)
1 hex key (4 mm)
6 saw blades (3x wood HCS; 3x metal BIM)
1 connector nipple 6.35 mm (1/4", pre-assembled)
1 set of operating instructions
Technical specifications
Rated speed max. 8500 rpm
Rated air pressure max. 6.3 bar
Stroke 10 mm
Noise emission values
Noise measurement determined in accordance with ISO15744:
Sound pressure level LpA = 92.1 dB (A)
Uncertainty KpA = 3 dB
Sound power level LWA = 103.1 dB (A)
Uncertainty KWA= 3 dB
Wear ear muffs!
Vibration emission value
Vibration values determined in accordance with ISO 28927-8 and
EN 12096: ah= 20.46 m/s2
Uncertainty K = 2.52 m/s2
PDKS 6.3 B3
■ 6 │ GB│CY
WARNING!
► The noise emission levels specified in these instructions have
been measured in accordance with the standardised measuring
procedure specified in ISO15744 and can be used to make
equipment comparisons. The noise emission values vary in
accordance with the use of the compressed-air tool and may
be higher than the values specified in these instructions in some
cases. It is easy to underestimate the noise emission load if the
compressed-air tool is used regularly in a certain manner.
NOTE
► For an accurate estimate of the noise emission load during a
certain working period, the times during which the appliance is
switched off or is running but not actually being used must also
be taken into consideration. This can significantly reduce the
noise emission load over the total working period.
PDKS 6.3 B3 GB│CY │ 7 ■
WARNING!
General safety instructions
■ Multiple hazards. Please ensure that you have read and under-
stood the safety instructions before setting up, operating,
repairing, maintaining and replacing accessories on circular and
oscillating sawing machines and sawing machines with recipro-
cating saw blades and before working near the machine. Failure
to do this can result in serious bodily injury.
■ Circular and oscillating sawing machines or sawing machines
with reciprocating saw blades should only be set up, adjusted or
used by suitably qualified and trained operators.
■ These circular and oscillating sawing machines or sawing
machines with reciprocating saw blades must not be modified.
Modifications can reduce the effectiveness of the safety measures
and increase the risks for the operator.
■ Do not lose the safety instructions – hand them to the operator.
■ Never use circular and oscillating sawing machines or sawing
machines with reciprocating saw blades if they are damaged.
■ Machinery must be inspected regularly to ensure that it is marked
with the required clearly legible rated values and markings. The
user must contact the manufacturer to obtain replacement labels
if necessary.
Autres manuels pour PDKS 6.3 B3
2
Ce manuel convient aux modèles suivants
1
Table des matières
Langues :
Autres manuels Parkside Scie
Parkside
Parkside PDS 120 B2 Guide rapide
Parkside
Parkside 364705 2101 Manuel utilisateur
Parkside
Parkside PMTS 180 A1 Manuel utilisateur
Parkside
Parkside PHKS 66 Manuel utilisateur
Parkside
Parkside PTS 480 A1 Guide de démarrage rapide
Parkside
Parkside PFS 710 B1 Manuel utilisateur
Parkside
Parkside 353555 2010 Manuel utilisateur
Parkside
Parkside SABRE SAW PFS 710 A1 Manuel utilisateur
Parkside
Parkside PZKS 2000 B2 Guide rapide
Parkside
Parkside PMB 1100 A1 Manuel utilisateur
Parkside
Parkside PTKS 1800 SE Manuel utilisateur
Parkside
Parkside PTKS 1800 SE Manuel utilisateur
Parkside
Parkside KH 3141 CIRCULAR SAW Manuel utilisateur
Parkside
Parkside PFS 710 B1 Manuel utilisateur
Parkside
Parkside PHKS 1450 LASER - 2 Manuel utilisateur
Parkside
Parkside PTS 20-Li A1 Manuel utilisateur
Parkside
Parkside PDKS 120 A2 Manuel utilisateur
Parkside
Parkside PTK 2000 C3 Manuel utilisateur
Parkside
Parkside PFS 710 Guide rapide
Parkside
Parkside PFS 710 A - MANUAL 3 Manuel utilisateur
