Parkside PSE 2800 A1 Manuel utilisateur
GENERATOR
Operation and Safety Notes
Original operating instructions
PSE 2800 A1
ΓΕΝΝΗΤΡΙΑ
Υποδείξεις χειρισμού και ασφαλείας
Πρωτότυπες Οδηγίες χρήσης
Anleitung_4152414_GB_IE_CY:_ 26.10.2011 16:29 Uhr Seite 1
2
GENERATOR
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of
the device.
Πριν ξεκινήσετε την ανάγνωση, ανοίξτε τη σελίδα με τις εικόνες και εξοικειωθείτε με όλες τις λει-
τουργίες της συσκευής.
GB/IE/CY Operation and Safety Notes Page 7
GR/CY Υποδείξεις χειρισμού και ασφαλείας Σελίδα 18
ΓΕΝΝΗΤΡΙΑ
Anleitung_4152414_GB_IE_CY:_ 26.10.2011 16:29 Uhr Seite 2
3
GENERATOR ΓΕΝΝΗΤΡΙΑ
2
11
11 13
12
L
3
4
3
3
5
6
2
67
8
910 5
34
3
Anleitung_4152414_GB_IE_CY:_ 26.10.2011 16:30 Uhr Seite 3
4
7
4
8
5
9
21
22
24
23
19 20
14
14 21
15
19
19 23
18
14
17
E
22
23 23
25
26
15
16
17
21
6
20
23
20
23
16
Anleitung_4152414_GB_IE_CY:_ 26.10.2011 16:30 Uhr Seite 4
5
13
12
14
10 11
8
A
A
D
9
7
B
C
Anleitung_4152414_GB_IE_CY:_ 26.10.2011 16:31 Uhr Seite 5
6
15
1
2
3
4
Anleitung_4152414_GB_IE_CY:_ 26.10.2011 16:31 Uhr Seite 6
7
GB/IE/
CY
Table of contents Page
1. Introduction ............................................................................8
2. Safety Information ..................................................................8-9
3. Layout ....................................................................................9
4. Intended use ...........................................................................9
5. Technical data.........................................................................10
6. Before starting the equipment ................................................10
7. Operation ................................................................................11
8. Cleaning, maintenance, storage, transport
and ordering of spare parts .....................................................12-13
9. Disposal and recycling ............................................................13
10. Troubleshooting guide ............................................................14
11. Maintenance schedule............................................................15
12. Declaration of conformity ........................................................16
13. Guarantee certificate ..............................................................17
The reprinting or reproduction by any other
means, in whole or in part, of documentation
and papers accompanying products is
permitted only with the express consent of ISC
GmbH. Technical changes subject to change
Anleitung_4152414_GB_IE_CY:_ 26.10.2011 16:31 Uhr Seite 7
8
GB/IE/
CY
1. Introduction
Important.
When using the equipment, a few safety
precautions must be observed to avoid injuries
and damage. Please read the complete
operating instructions and safety information
with due care. Keep this manual in a safe place
so that the information is available at all times. If
you give the equipment to any other person,
hand over these operating instructions and the
safety information as well. We cannot accept
any liability for damage or accidents which arise
due to a failure to follow these instructions and
the safety information.
2. Safety Information
No changes may be made to the generator.
Only original parts may be used for
maintenance and accessories.
Important: Danger of poisoning. Emissions,
fuels and lubricants are toxic. Do not inhale
emissions.
Children are to be kept away from the
generator.
Important: Risk of burns. Do not touch the
exhaust system or drive unit.
Wear suitable ear protection when in the
vicinity of the equipment.
Important: Petrol and petrol fumes are highly
combustible or explosive.
Never operate the generator in non-
ventilated rooms or in a highly inflammable
environment. If you intend to operate the
generator in rooms with good ventilation, the
exhaust gases must be channeled directly
outdoors through an exhaust hose.
Important: Toxic exhaust gases can escape
despite the exhaust hose. Due to the fire
hazard, never direct the exhaust hose
towards inflammable materials.
Risk of explosion: Never operate the
generator in rooms with combustible
materials.
The speed preset by the manufacturer is not
allowed to be changed. The generator or
connected equipment may be damaged.
Secure the generator against shifting and
toppling during transport.
Place the generator at least 1m away from
walls and equipment connected to them.
Place the generator in a secure, level
position. Do not turn, tip or change the
generator’s position while it is working.
Always switch off the engine when
transporting and refueling the generator.
Make sure that when you refuel the
generator no fuel is spilt on the engine or
exhaust pipe.
Never operate the generator in rain or snow.
Never touch the generator with wet hands.
Guard against electric danger.
When working outdoors, use only extension
cables that are approved for outdoor use
and which are marked accordingly
(H07RN..).
The overall length of the extension cables
used is not allowed to exceed 50 m for 1.5
mm² and 100 m for 2.5 mm².
No changes may be made to the settings of
the motor or generator.
Repairs and adjustment work may only be
carried out by authorized trained personnel.
Do not refuel or empty the tank near open
lights, fire or sparks. Do not smoke!
Do not touch any mechanically driven or hot
parts. Do not remove the safety guards.
Do not expose the equipment to damp or
dust. Permissible ambient temperature -10
to +40°, altitude: 1000 m above sea level,
relative humidity: 90 % (non-condensing)
The generator is driven by a combustion
engine, which produces heat in the range of
the exhaust (on the opposite side of the
socket) and exhaust outlet. You should
therefore avoid coming near these surfaces
because of risk of skin burns.
The values quoted in the technical data
under sound power level (LWA) and sound
pressure level (LpA) are emission values
and not necessarily reliable workplace
values. As there is a correlation between
emission and immission levels, the values
cannot be taken to reliably determine the
possible need for additional precautions.
Factors influencing the current immission
level of the user/operator include the
Anleitung_4152414_GB_IE_CY:_ 26.10.2011 16:31 Uhr Seite 8
properties of the work area, other sound
sources etc., e.g. the number of machines
and other neighboring processes, and the
time span over which the user/operator is
subjected to the noise. Also, the permitted
immission level can vary from country to
country. Nevertheless, this information
makes it possible for the user to be able to
make a better assessment of the dangers
and risks involved.
Important: Use only normal, unleaded
petrol as fuel.
CAUTION
Read all the safety regulations and
instructions. Any errors made in following the
safety regulations and instructions may result in
an electric shock, fire and/or serious injury.
Keep all safety regulations and instructions
in a safe place for future use.
Explanation of the warning signs on the
equipment (Fig. 15)
1. Important. Read the operating instructions.
2. Important. Hot parts. Keep your distance.
3. Important. Switch off the engine before
refueling.
4. Important. Never operate in non-ventilated
rooms.
3. Layout (Fig. 1-5)
1 Tank indicator
2 Tank cover
3 2 x 230 V~ socket-outlets
4 Earth connection
5 Overload cut-out
6 Voltmeter
7 Oil filler screw
8 Oil drainage screw
9 Oil shortage cut-out
10 On/Off switch
11 Choke lever
12 Reversing starter
13 Petrol cock
14 Wheels
15 Axle
16 Foot
17 Push bar holder
18 Push bar
19 Screws size M8 x 40
20 Screws size M8 x 16
21 Washers for wheels
22 Securing split pins for wheels
23 Nuts M8
24 Screwdriver
25 Spark plug wrench
26 Oil filler funnel
4. Intended use
The device is designed for applications
operated with a 230 V alternating current
source.
Be sure to observe the restrictions in the safety
instructions. The generator is intended to
provide electric power tools and light sources
with electricity. When using the device with
household appliances, please check their
suitability in accordance with the relevant
manufacturer’s instructions. In case of doubt,
ask an authorized dealer of the respective
equipment.
The equipment is to be used only for its
prescribed purpose. Any other use is deemed
to be a case of misuse. The user/operator and
not the manufacturer will be liable for any
damage or injuries of any kind caused as a
result of this.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be
voided if the equipment is used in commercial,
trade or industrial businesses or for equivalent
purposes.
GB/IE/
CY
9
Anleitung_4152414_GB_IE_CY:_ 26.10.2011 16:31 Uhr Seite 9
10
GB/IE/
CY
5. Technical data
Generator: Synchronous
Protection type: IP23
Continuous rated power Prated (S1): 2600 W
Maximum power Pmax (S2 2 min): 2800 W
Rated voltage Urated: 2 x 230V~
Rated current Irated: 11.3 A
Frequency Frated: 50 Hz
Drive engine design: 4-stroke, air-cooled
Displacement: 207.7 cm³
Fuel: Petrol
Tank capacity: 15 l
Engine oil: approx. 0.6 l (15W40)
Consumption at 2/3 load: approx. 1.36 l/h
Weight: 42 kg
LpA sound pressure level: 76 dB(A)
LWA sound power level 96 dB(A)
K uncertainty: 2.07 dB(A)
Power factor cos ϕ: 1
Power class: G1
Max. temperature: 40°C
Max. altitude (above mean sea level): 1,000 m
Spark plug: F7 RTC
Operating mode S1 (continuous operation)
The equipment can be continuously operated
with the quoted power output.
Operating mode S2 (temporary operation)
The equipment may be temporarily operated
with the quoted power output (2 min).
6. Before starting the equipment
6.1 Assembly
The installation of the equipment requires two
open-ended wrenches (size 12).
Assemble the foot (16), wheels (14) and
push bar (18) as shown in Figures 6-9.
Assemble all parts before filling in fuel and
oil in order to prevent the fluids from leaking
out.
To mount the wheels, first slide the axle (15)
through the mountings on the bottom of the
generator and fit the wheels (14) as shown
on Figure 7.
When fitting the push bar (18) check that the
angled side (Fig. 9/Item E) is pointing
outwards to ensure that the swing up
function works properly.
6.2 Electrical safety
Electric supply cables and connected
equipment must be in perfect condition.
The generator is to be operated only with
equipment whose voltage specifications
conform to the generator’s output voltage.
Never connect the generator to the power
supply (socket-outlet).
Keep the cable length to the consumer as
short as possible.
6.3 Environmental protection
Dispose of soiled maintenance material and
operating materials at the appropriate
collection point.
Recycle packaging material, metal and
plastics.
6.4 Connecting to earth
The housing must be connected to earth in
order to discharge static electricity. To do this,
connect one end of a cable to the earth
connection on the generator (Fig. 3/Item 4) and
the other end to an external earth.
Anleitung_4152414_GB_IE_CY:_ 26.10.2011 16:31 Uhr Seite 10
Autres manuels pour PSE 2800 A1
8
Table des matières
Langues :
Autres manuels Parkside Onduleur
Parkside
Parkside PGI 1200 B2 Manuel utilisateur
Parkside
Parkside PSE 2800 B2 Manuel utilisateur
Parkside
Parkside PSE 2800 B2 Manuel du propriétaire
Parkside
Parkside PSE 2800 B2 Guide de démarrage rapide
Parkside
Parkside Starterset 300 W Smart Manuel utilisateur
Parkside
Parkside PSE 2800 B2 Manuel utilisateur
Parkside
Parkside PGI 1200 A1 Guide rapide
Parkside
Parkside PSE 2800 A1 Manuel utilisateur
Parkside
Parkside PSE 2800 A1 Manuel utilisateur
Parkside
Parkside PSE 2800 A1 Manuel utilisateur
