
What’s New
Higher Resolution
The original Bass and Treble tone controls were digitally processed with a 48 kHz sampling rate.
The Bass and Treble tone controls now operate
with a 96 kHz sampling rate to enable the highest
possible resolution. Higher resolution lets you make
tonal adjustments without sacrificing overall quality
of sound and its ultimate detail and clarity.
Tone Frequency
The tone controls could previously boost or cut
Bass and Treble in frequency ranges that were
fixed. Now you have a choice of three frequencies
(technically known as “- 3 dB turnover points”) for
each tone control.
With these tone frequency settings you can make
more focused adjustments to optimize the way your
speakers and room work together.
The upgraded tone control settings are found on
the setup Menu, Audio setup page, Tone controls
page, Bass Freq. and Treble Freq.
The Treble tone control now offers you a choice of three frequencies where the treble tone
control range is centered, 6 kHz, 8 kHz and 10 kHz.
- 6 kHz setting: The Treble tone control
will make the most noticeable increase or
decrease in the high frequencies in your
music and movies. This will affect how
penetrating the treble range sounds to you
because it includes treble frequencies in a
range which is more audible. It has a subtle
effect on the upper part of the “presence”
range and increase at 6 kHz may improve the
intelligibility of dialogue.
- 8 kHz setting: The Treble tone control
will have a less noticeable and more subtle
increase or decrease in the high frequencies
in your music and movies. You may prefer
this setting.
- 10 kHz setting: The Treble tone control will
have the least impact on the perceived treble
of music or movies. You will probably hear
the effects of adjustments made at 10 kHz
more in terms of the “airiness” of a recording
than on its actual musical content. The 10 kHz
setting is ideal for making older recordings
sound more spacious and detailed without
changing their fundamental sonic balance. It
can also help reduce the ”edge” on poorly
made recordings which are overly “aggres-
sive” or have background hiss.
NEW CONTROLS continued 9
TONE CONTROLS
BASS: 0DB
Tone controls
> Bass + 0dB
Treble + 0dB
Treble freq 6 kHz
Bass freq 80 Hz
Exit
TONE CONTROLS
TREBLE FREQ: 6KHZ
Tone controls
Bass + 0dB
Treble + 0dB
> Treble freq 10 kHz
Bass freq 80 Hz
Exit
TONE CONTROLS
TREBLE FREQ: 8KHZ
TONE CONTROLS
TREBLE FREQ: 10KHZ