Paradyne Hotwire 8323 Manuel utilisateur

8323-A2-GZ40-00 March 2000

Hotwirer8323/8324 IDSL Cards

Installation Instructions

Document Number 8323-A2-GZ40-00

March 2000

What is a Hotwire 8323/8324 IDSL Card?

A Hotwirer8323/8324 Integrated Services Digital Network Digital Subscriber Line

(IDSL) card is a circuit card assembly that contains 24 ports, an interface to the

Network Service Provider (NSP), and a processor.

IDSL Card Chassis Type Uplink Interface

Type Endpoint Used

8323 8610/8810 DSLAM or

8820 GranDSLAM Ethernet 6321 or 6322 DSL

Router

8324 8820 GranDSLAM ATM via SAR

childcard

When the 8323/8324 IDSL card is used in a Hotwire 8610/8810 Digital Subscriber

Line Access Multiplexer (DSLAM) or 8820 GranDSLAM chassis and connected to

a Hotwire 6321/6322 DSL Router, it provides high-speed Internet or intranet

access over traditional twisted-pair telephone wiring.

Product Documentation on the World Wide Web

We provide complete product documentation online. This lets you search the

documentation for specific topics and print only what you need, reducing the

waste of surplus printing. It also helps us maintain competitive prices for our

products.

Complete documentation for this product is available at www.paradyne.com.

Select Library →Technical Manuals →Hotwire DSL & MVL Systems.

Select the following documents:

8000-A2-GB22

Hotwire Management Communications Controller (MCC) Card,

IP Conservative, User’s Guide

8000-A2-GB26

Hotwire MVL, RADSL, IDSL, and Packet SDSL Cards, Models

8310/8312/8314, 8510/8373/8374, 8323/8324, and 8343/8344, User’s Guide

8021-A2-GB20

Hotwire Shelf Concentration Module (SCM) Card User’s Guide

2 8323-A2-GZ40-00

March 2000

To order a paper copy of a Paradyne document:

HWithin the U.S.A., call 1-800-PARADYNE (1-800-727-2396)

HOutside the U.S.A., call 1-727-530-8623

8323/8324 IDSL Card Installation Planning

HEach Hotwire chassis is shipped with one of the following installation

documents:

Document Number Document Title

8610-A2-GN10 Hotwire 8610 DSLAM Installation Instructions

8810-A2-GN11 Hotwire 8810 DSLAM Installation Instructions

8820-A2-GN20 Hotwire 8820 GranDSLAM Installation Guide

HRefer to one of the above installation documents to:

— Install and set up the Hotwire DSLAM or GranDSLAM

— Install the Hotwire 8323/8324 IDSL Card

— Connect cables

HAfter the IDSL card is installed, there are configuration procedures that must

be performed before you can begin to use the IDSL cards for Internet or

intranet connectivity. Refer to either the Hotwire MVL, RADSL, IDSL, and

Packet SDSL Cards User’s Guide or the Hotwire Shelf Concentration Module

(SCM) Card User’s Guide for detailed configuration procedures. Access

these documents using the instructions in Product Documentation on the

World Wide Web.

8323-A2-GZ40-00 March 2000

Installing the IDSL Card

"Procedure

To install the Hotwire 8323/8324 IDSL card in a Hotwire chassis:

1. If there is a filler plate covering the slot, remove it.

2. Insert the card into the card guides of the slot on the chassis. For the 8323

IDSL card in an 8610 DSLAM, ensure that the components are facing up.

3. Carefully slide the card into the slot. Gently, but firmly, push the card until it

engages its mating connectors on the backplane.

4. Verify that the OK SYSTEM indicator on the card’s faceplate is blinking

(green). If not, refer to the appropriate chassis installation document.

5. Secure the card by fastening the screws on each end of the faceplate. This is

required to maintain proper gasket pressure on the faceplate as well as

proper air flow.

IDSL Card Technical Specifications

Specifications Criteria*

Size Length: 10.4 inches (26.42 cm)

Height: 11.15 inches (28.32 cm)

Width: 0.8 inches (2.03 cm)

Weight Approximately 1.4 lbs. (0.64 kg)

Approvals

Safety Certifications Refer to the equipment’s label for approvals on product.

Power The IDSL card contains a dc-to-dc converter that requires

–48V power input. The –48V power is distributed through

the Hotwire chassis backplane.

Maximum Power Dissipation = 36 watts

Physical Environment

Operating temperature

Storage temperature

Relative humidity

Shock and vibration

32°to 122°F (0°to 50°C)

–4°F to 158°F (–20°C to 70°C)

5% to 85% (noncondensing)

Withstands normal shipping and handling.

* Criteria of technical specifications are subject to change without notice.

00-16692

IDSL

10/100BT

8323

SYSTEM

OKAlrm

Test

TXRXColl

1/13

2/14

3/15

4/16

ETHERNET

DSL PORT

5/17

6/18

7/19

8/20

PORT

9/21

10/22

11/23

12/24

PORT

ALT BANK

13-24

1-12

4 8323-A2-GZ40-00

March 2000

8323 IDSL Card LEDs

The following table describes the meaning and states of the LEDs on the Hotwire

8323 IDSL card faceplate.

Type LED LED is . . . Indicating . . .

SYSTEM OK Green,

Winking

Green, On

Off

Card functioning normally. Winking describes a

recurring pulse when the LED is ON longer than

OFF at a ratio of approximately 10:1.

8323 IDSL card failure. System processing

functions have stopped.

No power to card.

Alrm Yellow, On

Off

Alarm is present on the 8323 IDSL card.

Ethernet (ETH1) interface is not being detected.

Normal operation, no alarms.

Test Yellow, On

Off

Test in progress.

Normal operation, no tests.

ETHERNET TX Green,

Blinking

Off

Packets are being transmitted. LED blinks on

and off about five times per second.

Inactive, link down.

RX Green,

Blinking

Off

Packets are being sent/received. LED blinks on

and off about five times per second.

Inactive.

Coll Off

Yellow,

Blinking

Normal operation.

A collision has been detected. LED blinks on

and off about five times per second.

DSL PORT 1/13,

2/14,

3/15,

4/16,

5/17,

6/18,

7/19,

8/20,

9/21,

10/22,

11/23,

12/24

Green, On

Off

Green,

Blinking

Green,

Reverse

Winking

DSL link is up.

DSL link is disabled.

Port test or DSL handshaking is in progress.

LED blinks on and off about five times per

second.

DSL link is down. Reverse winking describes a

recurring pulse when the LED is OFF longer

than ON at a ratio of approximately 10:1.

ALT BANK 13-24

1-12 Yellow, On

Off

One of the ports that is not currently being

displayed by the port status LEDs is either in a

Test Mode, a DSL handshake is in progress, the

DSL link is down, or there has been a card

reset.

The ports not currently being displayed by the

port status LEDs are functioning normally.

Status is OK.

00-16693

IDSL

10/100BT

8324

SYSTEM

OKAlrm

Test

TXRXLOC

1/13

2/14

3/15

4/16

ATM BUS

DSL PORT

5/17

6/18

7/19

8/20

PORT

9/21

10/22

11/23

12/24

PORT

ALT BANK

13-24

1-12

8323-A2-GZ40-00 March 2000

8324 IDSL Card LEDs

The following table describes the meaning and states of the LEDs on the Hotwire

8324 IDSL card faceplate.

Type LED LED is . . . Indicating . . .

SYSTEM OK Green,

Winking

Green, On

Off

Card functioning normally. Winking describes a

recurring pulse when the LED is ON longer than

OFF at a ratio of approximately 10:1.

8324 IDSL card failure. System processing

functions have stopped.

No power to card.

Alrm Yellow, On

Off

Alarm is present on the 8324 IDSL card. ATM

interface is not being detected.

Normal operation, no alarms.

Test Yellow, On

Off

Test in progress.

Normal operation, no tests.

ATM BUS TX Green,

Blinking

Off

Packets are being transmitted. LED blinks on

and off about five times per second.

Inactive.

RX Green,

Blinking

Off

Packets are being received. LED blinks on and

off about five times per second.

Inactive, link down.

LOC Off

Yellow,

Blinking

Normal operation.

ATM bus clock is not present.

DSL PORT 1/13,

2/14,

3/15,

4/16,

5/17,

6/18,

7/19,

8/20,

9/21,

10/22,

11/23,

12/24

Green, On

Off

Green,

Blinking

Green,

Reverse

Winking

DSL link is up.

DSL link is disabled.

Port test or DSL handshaking is in progress.

LED blinks on and off about five times per

second.

DSL link is down. Reverse winking describes a

recurring pulse when the LED is OFF longer

than ON at a ratio of approximately 10:1.

ALT BANK 13-24

1-12 Yellow, On

Off

One of the ports not currently being displayed

by the port status LEDs is either in a Test Mode,

there is a DSL handshake in progress, the DSL

link is down, or there has been a card reset.

The ports not currently displayed by the port

status LEDs are functioning normally. Status is

OK.

6 8323-A2-GZ40-00

March 2000

Warranty, Sales, Service, and Training Information

Contact your local sales representative, service representative, or distributor

directly for any help needed. For additional information concerning warranty,

sales, service, repair, installation, documentation, training, distributor locations, or

Paradyne worldwide office locations, use one of the following methods:

HInternet: Visit the Paradyne World Wide Web site at www.paradyne.com.

(Be sure to register your warranty at www.paradyne.com/warranty.)

HTelephone: Call our automated system to receive current information by fax

or to speak with a company representative.

—Within the U.S.A., call 1-800-870-2221

—Outside the U.S.A., call 1-727-530-2340

Document Feedback

We welcome your comments and suggestions about this document. Please mail

them to Technical Publications, Paradyne Corporation, 8545 126th Ave. N.,

Largo, FL 33773, or send e-mail to [email protected]. Include the

number and title of this document in your correspondence. Please include your

name and phone number if you are willing to provide additional clarification.

Trademarks

Hotwire is a registered trademark of Paradyne Corporation. MVL is a trademark

of Paradyne Corporation. All other products and services mentioned herein are

the trademarks, service marks, registered trademarks, or registered service

marks of their respective owners.

*8323-A2-GZ40-00*

*8323–A2–GZ40–00*

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Paradyne Carte réseau

Paradyne

Paradyne 8955 Manuel utilisateur

Paradyne

Paradyne HOTWIRE 8310 MVL Manuel utilisateur

Paradyne

Paradyne Hotwire 8335 Manuel utilisateur

Paradyne

Paradyne Hotwire 8303 Manuel utilisateur

Paradyne

Paradyne Hotwire 8373 Manuel utilisateur

Paradyne

Paradyne Hotwire 8312 Manuel utilisateur

Paradyne

Paradyne 8975 Manuel d'exploitation et d'entretien

Paradyne

Paradyne 8968 Manuel d'exploitation et d'entretien

Paradyne

Paradyne Hotwire 8510 Manuel utilisateur

Paradyne

Paradyne 3166 DSU Manuel utilisateur

Paradyne

Paradyne FrameSaver 9120 Manuel utilisateur

Paradyne

Paradyne HOTWIRE 5171 Manuel utilisateur

Paradyne

Paradyne Adapter Bracket Manuel d'exploitation et d'entretien

Paradyne

Paradyne HotWire 8546 Manuel utilisateur

Paradyne

Paradyne 3162 Manuel utilisateur

Paradyne

Paradyne FrameSaver 9620 Manuel utilisateur

Paradyne

Paradyne UIM-10/100 Manuel utilisateur

Paradyne

Paradyne Hotwire ATM Line Cards 8335 Manuel utilisateur

Paradyne

Paradyne Hotwire 8310 Manuel utilisateur

Paradyne

Paradyne Hotwire 8343 Manuel utilisateur

Paradyne

Paradyne Hotwire 8335 Manuel utilisateur

Paradyne

Paradyne 8411-A1-000 Manuel utilisateur

Paradyne

Paradyne BitStorm 2600 IP DSLAM Manuel utilisateur

Paradyne

Paradyne Hotwire 8303 Manuel utilisateur

Manuels Carte réseau populaires d'autres marques

FirstComm

FirstComm OBiWiFi5G Manuel utilisateur

Sun Microsystems

Sun Microsystems Interface Adapter Manuel utilisateur

TRENDnet

TRENDnet TU2-ETG Manuel utilisateur

YASKAWA

YASKAWA SI-EN3 Manuel utilisateur

Belkin

Belkin F5D7050 Manuel utilisateur

3Com

3Com EtherLink 3C509B Manuel utilisateur

TRENDnet

TRENDnet TEG-PCITX Manuel utilisateur

Cisco

Cisco MC16E Manuel utilisateur

Delta Electronics

Delta Electronics Braking Modules VFDB Series Manuel utilisateur

TwinMOS

TwinMOS Booming Manuel utilisateur

Dialogic

Dialogic Media Board DM/V1200BTEPEQ Manuel utilisateur

Buffalo

Buffalo AirStation WLI-PCM-L11GP Manuel utilisateur

National Instruments

National Instruments NI 9234 Manuel utilisateur

Hama

Hama 49276 Manuel utilisateur

Linksys

Linksys WCF54G - Wireless-G Compact Flash Card Manuel d'utilisation

Compaq

Compaq Wireless LAN 100 Manuel utilisateur

Bose

Bose PowerMatch Dante Manuel utilisateur

TRENDnet

TRENDnet TEG-PCITXR Manuel utilisateur