Paradyne 7610 Guide d'installation

TM

1

7610-A2-GK40-00 September 1997

Model 7610 SNMP DSU

Firmware Update and Errata

Document Number 7610-A2-GK40-00

September 1997

Overview

This document shows features changed with firmware releases up to

01.05.00 and corrections to the

Model 7610 SNMP DSU User’s Guide

(7610-A2-GB20-00).

Port LEDs

The description of the TXD and RXD LEDs are incorrect in the User’s Guide.

TXD – Transmitted Data:

ON – Receiving all 0s from the DTE.

OFF – Receiving all 1s from the DTE.

Blinking – User data is being transferred.

RXD – Received Data:

ON – Sending all 0s to the DTE.

OFF – Sending all 1s to the DTE.

Blinking – User data is being transferred.

2 7610-A2-GK40-00

September 1997

System and Test Status Messages Clear Function

The System and Test Status information screen described on pages 6-5–6-7 has

a new virtual function key, Clear. Select Clear and press Return to clear status

messages for one-time events such as Device Fail and Memory Fail.

Configuration Options

The default LADS Timing source has changed, affecting Table A-1 in

Appendix A.

Table A-1. System Options

LADS Timing

Possible Settings: Internal, External, Receive

Default Setting: Internal

Determines the timing source for the unit.

LADS Timing option appears when Operating Mode is set to LADS.

Internal – Timing is derived from the unit’s local clock. Use this setting for the LADS

primary timing unit that establishes the timing for both point-to-point units.

External – Timing is derived from the external clock provided by the DTE connected to

the V.35 interface on circuit CT113 (pins U, W).

NOTE: The valid rate generated by the DTE must be equal to the LADS line rate

minus the configured rate of 1600, 4000, or 8000 bps for the IMC, if

enabled.

Receive – Timing is derived from the line receive signal unless the unit is running

diagnostic tests. During the tests, the timing source is the internal clock. This setting

should be used for a LADS secondary timing unit.



*7610–A2–GK40–00*

Autres manuels pour 7610

1

Table des matières

Autres manuels Paradyne Accessoires réseau

Paradyne

Paradyne COMSPHERE 6800 Series Manuel d'installation

Paradyne

Paradyne 8820 Manuel utilisateur

Paradyne

Paradyne Hotwire 8620 Manuel utilisateur

Paradyne

Paradyne 3172 Manuel

Paradyne

Paradyne 8820 Manuel utilisateur

Paradyne

Paradyne Hotwire 8620 Manuel utilisateur

Paradyne

Paradyne Hotwire 6038 Manuel utilisateur

Paradyne

Paradyne FrameSaver SLV NNI Manuel utilisateur

Paradyne

Paradyne 7110 Manuel d'exploitation et d'entretien

Paradyne

Paradyne COMSPHERE 6800 Series Manuel utilisateur

Paradyne

Paradyne AIM24000 Manuel utilisateur

Paradyne

Paradyne COMSPHERE 6800 Series Manuel utilisateur

Paradyne

Paradyne COMSPHERE 6800 Series Manuel utilisateur

Paradyne

Paradyne 7610 Manuel utilisateur

Paradyne

Paradyne Hotwire 7975 Manuel utilisateur

Paradyne

Paradyne Hotwire 5546 Manuel utilisateur

Paradyne

Paradyne 7110 Manuel utilisateur

Manuels Accessoires réseau populaires d'autres marques

Valcom

Valcom VIP-804 Manuel utilisateur

SKUTCH

SKUTCH BA-1000 Manuel du produit

QUNDIS

QUNDIS RNN5 Manuel utilisateur

Asus

Asus AAEON FWS-2365 Manuel utilisateur

Sophos

Sophos XG 85w Manuel utilisateur

AMCI

AMCI RBE2-8 Manuel utilisateur

Patton electronics

Patton electronics 2888 Manuel utilisateur

Cradlepoint

Cradlepoint COR IBR1100/IBR1150 Manuel utilisateur

Infra Cool

Infra Cool F-1.3 Manuel utilisateur

Edgewater Networks

Edgewater Networks 4300T Manuel utilisateur

Edimax

Edimax SB-2200g Manuel utilisateur

Extreme Networks

Extreme Networks Mogul-100 Manuel utilisateur

Aaeon

Aaeon FWS-8500 Manuel utilisateur

Panduit

Panduit Z11C Series Manuel utilisateur

F5

F5 BIG-IP 10000 Series Instructions de montage

ZyXEL Communications

ZyXEL Communications NMA1115 Manuel utilisateur

Auerswald

Auerswald COMtrexx Business Manuel utilisateur

Actisense

Actisense QNB-1-B Manuel utilisateur