Panduit CT-2940/L Manuel utilisateur
CT-2940/L and CT-2940/LE
PA26010A01
Rev. 00 5-2009
© Panduit Corp. 2009
ENGLISH Pg. 1
DEUTSCH Pg. 11
FRANÇAISE Pg. 16
ITALIANA Pg. 21
ESPAÑOL Pg. 26
ÈESKÝ Pg. 31
NEDERLANDSE Pg. 36
DANSKE Pg. 41
SVENSKA Pg. 46
SUOMEN Pg. 51
NORSK Pg. 56
Website: www.panduit.com
EU Website:
www.panduit.com/emea
EU Email: EMEA-
Toolservice[email protected]
Panduit Corp. • USA Headquarters • Tinley Park, IL
Tel: 888-506-5400, ext. 3255 • Fax: 630-759-7532
PANDUIT Europe • EMEA Headquarters
Tel: +31 (0) 546 580 452 • Fax: +31 (0) 546 580 441
CT-2940/L and CT-2940/LE ENGLISH
CT-2940/L & CT-2940/LE_ENGL PA26010A01_00 Page: 1 of 60 5-2009
SYSTEM SPECIFICATIONS......................................................................................................................................1
OPTIONAL ACCESSORIES (sold separately)........................................................................................................2
PRECAUTIONS AND GENERAL GUIDELINES.......................................................................................................3
DIE SELECTION........................................................................................................................................................5
MAINTENANCE.........................................................................................................................................................5
DIE INSTALLATION ..................................................................................................................................................6
TOOL OPERATION ...................................................................................................................................................7
SYSTEM SPECIFICATIONS
Output: 15 tons / 13.6 (metric tons)
A
pplicable Range:
PANDUIT Connectors • Cu lugs and splices for #8 AWG
–
1000 kcmil code conductor
• Cu lugs for #8 AWG – 777.7 kcmil flex conductor
• Cu lugs and splices for 10mm² – 630mm² class 2R conductor
• StructuredGround® Direct Burial Compression Grounding System
connectors #6 AWG – 250 kcmil code conductor
• Cu CTAPF taps for #10 – 3/0 AWG code conductor
• Cu CTAP taps for #8 – 4/0 AWG code conductor
• Cu HTCT taps for #14 AWG – 1000 kcmil code conductor,
#14 AWG – 777.7 kcmil flex conductor
• Al lugs and splices for #6 AWG – 1000 kcmil code conductor
Motor: 14.4 V DC motor
24.35 lbs. / 11.04 kg (+ )
CT-2940/L and CT-2940/LE ENGLISH
CT-2940/L & CT-2940/LE_ENGL PA26010A01_00 Page: 2 of 60 5-2009
MILWAUKEE®Li-Ion 18V,
Battery Packs (2) MILWAUKEE® Li-Ion 18V
Battery Charger CA21414B01
Shoulder Strap Carrying Case
English NOTE: In the interest of higher quality and value, PANDUIT products are continually being improved and
updated. Consequently, pictures may vary from the enclosed product.
OPTIONAL ACCESSORIES (sold separately)
CD-920, CD-930 and CD-940 Series
Compression Dies Consult PANDUIT catalog or website for part numbers
and specific die application information.
CD-940-DA Die Adapter Use with CD-920 and CD-930 series dies.
CG-940 Compression Gauge Verifies the compression force of the CT-2940/L and
CT-2940/LE Hydraulic Compression Tools
CT-2940/L
Lithium Ion (Li-Ion) Battery Pack CT-2940/LE EUR
Lithium Ion (Li-Ion) Battery Pack
Milwaukee®18V Battery Pack
Part No.: 48-11-1828 18 V DC, 2.8 Ah Milwaukee®18V Battery Pack
Part No.: C18B 18 V DC, 3.0 Ah
45 min. 1.85 lbs. / 0.84 kg (+ )
Refer to Milwaukee® Operator’s Manuals which are supplied with battery pack and charger.
CT-2940/L Battery Charger CT-2940/LE EUR Battery Charger
Milwaukee
®
Battery Charger
Part No.: 48-59-1801 Milwaukee
®
Battery Charger
Part No.: C18C
Input: 120 V AC; 60 Hz, 2.1A Input: 230 V AC; 50-60 Hz, 1.2A
Output: 18 V DC, 3.5A Output: 18 V DC, 3.5A
Replacement Milwaukee®Batteries and Battery Chargers are available for purchase from local Milwaukee®
products distributors or resellers.
Milwaukee® is a registered trademark of Milwaukee Electric Tool Corporation
The information contained in this literature is based on our experience to date and is believed to be reliable. It is intended as
a guide for use by persons having technical skill at their own discretion and risk. We do not guarantee favorable results or
assume any liability in connection with its use. Dimensions contained herein are for reference purposes only. For specific
dimensional requirements consult the factory. This publication is not to be taken as a license to operate under, or a
recommendation to infringe any existing patents. This supersedes and voids all previous literature, etc.
CT-2940/L and CT-2940/LE ENGLISH
CT-2940/L & CT-2940/LE_ENGL PA26010A01_00 Page: 3 of 60 5-2009
PRECAUTIONS AND GENERAL GUIDELINES
This symbol is used to call your attention to hazards or unsafe practices which could result in an
injury or property damage. The signal word, defined below, indicates the severity of the hazard.
The message after the signal word provides information for preventing or avoiding the hazard.
WARNING Hazards which, if not avoided, COULD result in severe injury or death.
CAUTION Hazards or unsafe practices which, if not avoided, MAY result in injury or
property damage.
WARNING
Read and understand all of the instructions and safety information in this manual before
operating or servicing this tool.
WARNING
Electric Shock Hazard:
This tool is not insulated. When using this unit on or near energized electrical lines, use proper
personal protective equipment.
WARNING
Wear eye protection when operating or servicing this tool.
Failure to wear eye protection can result in serious eye injury from flying debris or hydraulic oil.
WARNING
Skin Injection Hazard:
Oil under pressure easily punctures skin causing serious injury, gangrene, or death. If you are
injured by escaping oil, seek medical attention immediately.
•Do not use hands to check for leaks.
•Depressurize the hydraulic system before servicing.
WARNING
Do not use solvents or flammable liquids to clean this tool. Solvents or flammable liquids could
ignite and cause serious injury or property damage. During the operation of electric motors,
sparks can occur which might ignite highly flammable or explosive liquids and materials.
Do not use tool in or near a highly flammable or explosive atmosphere and/or materials.
WARNING
Keep hands away from the tool head when crimping.
CT-2940/L and CT-2940/LE ENGLISH
CT-2940/L & CT-2940/LE_ENGL PA26010A01_00 Page: 4 of 60 5-2009
WARNING
An incomplete crimp can cause a fire.
•Use proper connector and cable combinations. Improper combinations can result in an incomplete crimp.
•The relief valve will sound to indicate a completed crimp. If you do not hear the sound of the relief valve, the
crimp is not complete.
•Inspect tool before use. A worn or damaged tool may result in breakage striking the operator or nearby
personnel.
CAUTION
•Do not perform any service or maintenance other than as described in this manual.
Injury or damage to the tool may result.
•Do not operate the tool without dies. Damage to the ram or crimping tool head can result.
•This tool is not designed for continuous use.
•After 30 to 40 cycles, allow the tool to cool for 15 minutes.
•Do not place the tool in a vise. The tool is designed for hand-held operation.
•Protect the tool from rain and moisture. Water will damage the tool and battery.
•Electric-hydraulic tools should not be operated in pouring rain or under water.
•Use this tool for the manufacturer’s intended purpose only.
CAUTION
Before crimping a connection, verify that the tool top on the tool head is locked in the closed position.
The lockout pin must be engaged completely through the tool head and both surfaces of the tool top.
Failure to lock the tool top in the closed position may result in damage to the tool and personal injury.
CT-2940/L and CT-2940/LE ENGLISH
CT-2940/L & CT-2940/LE_ENGL PA26010A01_00 Page: 5 of 60 5-2009
IMPORTANT INFORMATION
•Keep the tool head and tool body portion clean and free from debris. Soap and a damp cloth should be used
to clean the tool body.
•Always store the tool in its clean, dry carrying case when not in use.
•DO NOT press trigger and release button simultaneously. Damage to trigger linkage may result.
•DO NOT let the ram contact the crimp head.
•Always point tool away from others.
•If the tool is kept in cold temperatures below 23oF/-5oC for any extended time, it is advisable to return the tool
to room temperature for 1 hour before using.
•Always verify the proper size connector for the conductor, by checking the color code and the printing on the
connector.
•Avoid dropping the tool. Extreme shock may damage the hydraulic circuit and result in malfunction of the tool.
NOTE: CONNECTIONS UTILIZING THIS TOOL ARE U.L. LISTED AND C.S.A. CERTIFIED ONLY WHEN
PANDUIT COPPER COMPRESSION CONNECTORS ARE USED. USE OF ANY OTHER BRAND OF
COMPRESSION CONNECTORS IS NOT RECOMMENDED.
DIE SELECTION
NOTE: DIES ARE DESIGNED TO PROVIDE THE
HIGHEST QUALITY CRIMPING WHEN USED WITH
PANDUIT COMPRESSION CONNECTORS.
USE OF ANY OTHER BRAND OF CONNECTORS IS
NOT RECOMMENDED WITH CD-920, CD-930 OR
CD-940 DIES.
MAINTENANCE
It is recommended that the hydraulic fluid be changed every 24 months. The tool should be returned to PANDUIT
Tool Division for proper oil changing.
CT-2940/L and CT-2940/LE
CT-2940/L & CT-2940/LE PA26010A01_00 Page: 6 of 48 5-2009
ENGLISH DIE INSTALLATION
DEUTSCH INSTALLATION DES CRIMPSTEMPELS
FRANÇAISE INSTALLATION DU POINÇON
ITALIANA INSTALLAZIONE DADI
ESPAÑOL INSTALACIÓN DE LOS DADOS
ÈESKÝ VLOŽENÍ MATRICE
NEDERLANDSE INSTALLEREN VAN DE MATRIJS
DANSKE INSTALLATION AF MATRICE
SVENSKA FORMINSTALLATION
SUOMEN KAAPELIKENGÄN ASENTAMINEN
NORSK PRESS-STEMPEL-INSTALLASJON
CT-2940/L and CT-2940/LE
CT-2940/L & CT-2940/LE PA26010A01_00 Page: 7 of 48 5-2009
ENGLISH TOOL OPERATION
DEUTSCH BEDIENUNG DES WERKZEUGS
FRANÇAISE FONCTIONNEMENT DE L’OUTIL
ITALIANA AVVIAMENTO DELL'ATTREZZO
ESPAÑOL OPERACIÓN DE LA HERRAMIENTA
ÈESKÝ OBSLUHA NÁSTROJE
NEDERLANDSE GEBRUIK VAN HET GEREEDSCHAP
DANSKE BETJENING AF VÆRKTØJET
SVENSKA VERKTYG MANÖVRERING
SUOMEN TYÖKALUN KÄYTTÖ
NORSK BETJENING AV MASKINEN
CT-2940/L and CT-2940/LE
CT-2940/L & CT-2940/LE PA26010A01_00 Page: 8 of 48 5-2009
ENGLISH CAUTION: Do not crimp connector
DEUTSCH ACHTUNG: Vercrimpen Sie nicht den Steckverbinder
FRANÇAISE ATTENTION: Ne sertissez pas le connecteur
ITALIANA ATTENZIONE: Non crimpare il connettore
ESPAÑOL PRECAUCIÓN: No frunza el conector
ÈESKÝ POZOR: Konektor zatím nekrimpujte
NEDERLANDSE LET OP! Krimp de connector niet
DANSKE FORSIGTIG: Konnektoren må ikke krympes
SVENSKA SE UPP: Pressa inte kontakten
SUOMEN HUOMAA: Älä purista liitintä
NORSK FORSIKTIG: Ikke crimp konnektoren
CT-2940/L and CT-2940/LE
CT-2940/L & CT-2940/LE PA26010A01_00 Page: 9 of 48 5-2009
Ce manuel convient aux modèles suivants
1
Table des matières
Langues :
Autres manuels Panduit Outils de sertissage
Panduit
Panduit ClackFin CT-3001/CCPBT Manuel utilisateur
Panduit
Panduit BlackFin CT-2600/L Manuel utilisateur
Panduit
Panduit CTFP-100 Manuel utilisateur
Panduit
Panduit CT-920 Series Manuel utilisateur
Panduit
Panduit BlackFin CT-2980/STBT Manuel utilisateur
Panduit
Panduit BlackFin CT-2600 Series Manuel utilisateur
Panduit
Panduit Black Fin CT-2931 Series Manuel utilisateur
Panduit
Panduit CT-460 Instructions d'installation
Panduit
Panduit BlackFin CT-2980/ST Manuel utilisateur
Panduit
Panduit CT-1000 Manuel utilisateur
Panduit
Panduit Blackfin CT-2980/TO Manuel utilisateur
Panduit
Panduit CT-1002 Manuel
Panduit
Panduit Contour Crimp CT-1015 Manuel utilisateur
Panduit
Panduit CT-1123 Mode d’emploi
Panduit
Panduit BlackFin CT-3980/BT Manuel utilisateur
Panduit
Panduit CT-2500 Manuel utilisateur
Panduit
Panduit PBTMT Manuel utilisateur
Panduit
Panduit Black Fin CT-2931/STCVUK Manuel utilisateur
Panduit
Panduit CT-1000 Guide de l'administrateur
Panduit
Panduit BlackFin CT-2300 Series Manuel utilisateur
Manuels Outils de sertissage populaires d'autres marques
HOGERT
HOGERT HT1P169 Manuel utilisateur
Textron
Textron ESG105L Manuel utilisateur
Tyco Electronics
Tyco Electronics 90035-3 Manuel utilisateur
Emerson
Emerson Klauke ES 20RMCCFB Manuel utilisateur
Continental Refrigerator
Continental Refrigerator PC150HD Manuel utilisateur
TE Connectivity
TE Connectivity ERGOCRIMP 1-1579001-3 Manuel utilisateur