Panasonic HDV Series Manuel utilisateur

What functions can I activate on my phone?

HDV Range (230, 130, 330)

(1) Holding a call

Put a call on hold by holding the call at your extension. To hold the current call:

[HOLD/MESSAGE] To retrieve a call on hold at your line: [HOLD/MESSAGE]

(2) Receiving a second call (answering call waiting)

During a conversation, if a second call arrives, you will hear a call waiting tone. You

can answer the second call by disconnecting or holding the current call.

To disconnect the current call and then talk to the new party:

● Go on-hook

●Go off-hook

To hold the current call and then talk to the new party: Answer

(3) Talking to two parties alternately (call splitting)

When talking to one party while the other party is on hold, you can swap the calls

back and forth (alternately). To alternate between the parties leaving one party on

hold temporarily:

● Press [HOLD/MESSAGE] during a conversation.

● Dial the other party’s extension number.

● After talking to the other party, press [HOLD/MESSAGE].

●Talk to the original party.

(4) Transferring a call

You can transfer a call to another destination (extension or outside party). To

transfer:

● Press [TRANSFER] during a conversation.

● Dial the party you want to transfer to, press Call

● Wait until the other party answers to announce the transfer.

● Go on-hook. To return to the call before the transfer destination answers, press

[CANCEL]

(5) Mute

You can disable the microphone or the handset to consult privately with others in the

room while listening to the other party on the phone through the speaker or the

handset.

To set/cancel: [MUTE/AUTO ANS]

● When the icon is blinking on the LCD, Mute is on.

● During Mute, even if you switch from/to speakerphone, Mute will continue.

● During Mute, even if you connect/disconnect a headset, Mute will continue.

(6) To access the FWD/DND settings

● Menu

● [UP]/[DOWN]: “Fwd/DND” → OK

● If the unit has multiple lines, press [UP] or [DOWN] to select the desired line → OK

●[UP]/[DOWN]: Select the type of FWD or DND setting to apply → OK

The settings are as follows:

● DND: Enable Do Not Disturb (All incoming calls are automatically rejected.)

● Fwd (All): Enable Forward All Calls (All incoming calls are forwarded.)

● Fwd (Busy): Enable Forward Busy (Incoming calls are forwarded only when your

extension is in use.)

● Fwd (NA): Enable Forward No answer (An incoming call is forwarded if you do not

answer the call within a certain amount of time.)

● If a Forward setting is selected, enter a new forward destination number, or

confirm and modify a previously set forward destination number → OK

UT Range (113, 123, 133, 136, 124)

(1) Holding a call

You can put a call on hold by holding the call at your extension. To hold the current

call press [HOLD] and then go on-hook. To retrieve a call on hold at your extension:

● Go off-hook.

● Do one of the following, depending on your unit:

–For KX-UT113/KX-UT123 users, press [HOLD]

–For KX-UT133/KX-UT136/KX-UT248 users, press the green flashing flexible button

If a call is not retrieved within a specified time, you will hear an alarm as a reminder.

(2) Receiving a second call (answering call waiting)

During a conversation, if a second call arrives, you will hear a call waiting tone. You

can answer the second call by disconnecting or holding the current call. To

disconnect the current call and then talk to the new party:

● Go on-hook while hearing the call waiting tone.

● Go off-hook.

(3) To hold the current call and then talk to the new party:

● For KX-UT113/KX-UT123 users, press [HOLD] while hearing the call waiting tone.

● For KX-UT133/KX-UT136/KX-UT248 users, press [HOLD] while hearing the call

waiting tone and then press the green flashing flexible button.

(4) Talking to two parties alternately (call splitting)

When you are talking to one party and have another party on hold, you can switch

the call on hold and the current call.

● Press [HOLD] during a conversation.

● Call the second party.

● Do one of the following, depending on your unit:

–For KX-UT113/KX-UT123 users, press [HOLD].

–For KX-UT133/KX-UT136/KX-UT248 users, press [HOLD], and then press the

green flashing flexible button that corresponds to the other party on hold.

(5) Transferring a call

You can transfer a call to another destination (extension or outside party).

For an attended transfer:

● Press [TRANSFER] during a conversation.

● Call the party you want to transfer the call to.

● Wait until the other party answers to announce the transfer.

● Press [Xfer OK].

(6) Mute

You can mute your voice during a conversation. While the mute feature is turned on,

you will be able to hear the other party, but the other party will not be able to hear

you.

The built-in microphone, handset, and headset are all muted when the mute feature

is turned on.

To mute/un-mute, press [MUTE].

(7) Call forwarding/Do not disturb

You can have incoming calls automatically forwarded to another destination. You

can also have incoming calls rejected (Do Not Disturb).

When Call Forwarding or Do Not Disturb is enabled, FWD/DND appears on the

display in stand-by mode.

(8) To access the FWD/DND settings

● In stand-by mode, press Setting or [FORWARD/DO NOT DISTURB]. If you press

[FORWARD/DO NOT DISTURB], continue to step 3.

● Press [UP]or [DOWN] to select “FWD/DND Setting”, and then press [ENTER].

● If the unit has multiple lines, press [UP] or [DOWN] to select the desired line, and

then press [ENTER].

● Press [UP] or [DOWN] to select the type of FWD or DND setting to apply, and then

press [ENTER].

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Panasonic Téléphone

Panasonic

Panasonic DBS 576 Section 300 Manuel utilisateur

Panasonic

Panasonic KX-NT6 Series Manuel utilisateur

Panasonic

Panasonic KX-HTS824 Manuel du propriétaire

Panasonic

Panasonic KX-TGA820C Manuel utilisateur

Panasonic

Panasonic KXTE Series Manuel d'instructions

Panasonic

Panasonic KX-TG1233BXS Manuel utilisateur

Panasonic

Panasonic KX-TC150-W Guide de démarrage rapide

Panasonic

Panasonic KX-HDV130B Manuel utilisateur

Panasonic

Panasonic KX-T7400 Series Instructions d'installation et d'utilisation

Panasonic

Panasonic KX-TC1723B Instructions d'utilisation et d'installation

Panasonic

Panasonic KX- TAW848 Fiche technique

Panasonic

Panasonic KX-DT 333 Series Manuel utilisateur

Panasonic

Panasonic KX-PRXA10 Manuel utilisateur

Panasonic

Panasonic KX-TS820 Manuel utilisateur

Panasonic

Panasonic KX-T7700 Series Manuel utilisateur

Panasonic

Panasonic KX-NT553 Manuel utilisateur

Panasonic

Panasonic KX-TA824 Manuel utilisateur

Panasonic

Panasonic KX-TG3521BXB Manuel utilisateur

Panasonic

Panasonic DBS 38 Manuel utilisateur

Panasonic

Panasonic KX-PRX120E Manuel utilisateur

Panasonic

Panasonic KX-TCD510RUM Manuel utilisateur

Panasonic

Panasonic KX-NT300 series Fiche technique

Panasonic

Panasonic VoiceSonic VB-42210 Manuel utilisateur

Panasonic

Panasonic KX-NS700 Manuel utilisateur

Manuels Téléphone populaires d'autres marques

GE 2-9480 Manuel utilisateur

Geemarc

Geemarc PHOTOPHONE 155 Manuel utilisateur

D-Link

D-Link DWR-720/PW Manuel utilisateur

Interquartz

Interquartz Gemini IQ333 Manuel utilisateur

SSS Siedle

SSS Siedle HT 840-0 Manuel utilisateur

Motorola

Motorola TITANIUM Manuel utilisateur

LG H870DS Manuel utilisateur

Samsung

Samsung GT-I9500 Manuel utilisateur

AT&T

AT&T Trimline 205 Manuel utilisateur

Selta

Selta zenyth 600 Manuel utilisateur

Doro

Doro AFTI 20 Manuel utilisateur

UNIQCELL

UNIQCELL A1 Manuel utilisateur

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Manuel utilisateur

BT Decor 425 Manuel utilisateur

NEC

NEC SV8500 Manuel utilisateur

Teledex

Teledex PEARL Manuel utilisateur

Ericsson

Ericsson Dialog 3213 Manuel utilisateur

Yealink

Yealink VP530 Manuel utilisateur