Panasonic HNP11 Manuel utilisateur

Operating Instructions

Please read this manual before using and save this manual for future reference.

Network Camera Recorder

Trial Version

Please note that since this software is a trial version, camera registration is

restricted to only 1 camera and support services are not available.

Operating Instructions

Main Features

Recording or Playing Images with Audio

This software records or plays images with audio from the camera (The camera

with audio will be released soon.) (see page 61). Since you can record images with

audio, recorded images become impressive. For example, you can use the images

with audio for training employee after you record your shop scene. This software

can also record multiple cameras simultaneously.

Advanced Motion Detection Recording

Motion detection recording is improved from BB-HNP60. You can set a time (1—

60 seconds) to record before or after motion detection (see page 37). You can

check the detail condition when the motion was detected.

Advanced Timer Recording and Search Ability

You can set a keyword in timer recording (see page 58). You can manage images

by keyword. 10 settings can be set in timer recording for each camera. Additionally,

you can search images by time, recording method (such as timer recording and

motion detection recording), or keyword (see page 65).

Other Features

•Layout Feature of Operation Window (see page 41 to page 43)

You can change size or location of camera list or operation bar for the camera,

or you can display them separately.

•Camera List (see page 68)

The registered cameras can be listed, and the camera preview size can be set

in 6 levels.

•Recording Capacity Limit (see page 36)

If you set the maximum value, you can limit the recording capacity.

•Automatic Backup (see page 28)

This software starts backing up images at the set time.

Operating Instructions

System Requirements for your PC

Your PC (Personal Computer) and network must meet the following technical

specifications for this software to work properly.

Notes

• The information above is based on 640 x 480 resolution, favor clarity,

motion detection recording, recording interval: Not Specify, recording

capacity limited settings to decide your PC specification. The information

may change depending on the system or composition.

• Change the hard disk capacity considering file size shown on page 25.

Trademarks

• Microsoft and Windows are either registered trademarks or trademarks of

Microsoft Corporation in the United States and/or other countries.

• Adobe, Acrobat and Reader are either registered trademarks or trademarks of

Adobe Systems Incorporated in the United States and/or other countries.

• Intel and Pentium are trademarks or registered trademarks of Intel Corporation

or its subsidiaries in the United States and other countries.

• Screen shots reprinted with permission from Microsoft Corporation.

• All other trademarks identified herein are the property of their respective

owners.

Items Description

Operating

System

Microsoft®Windows®XP Professional Edition

Microsoft®Windows®2000 (Service Pack 2 or later)

Web Browser Internet Explorer 6.0 or later

File System NTFS (NT File System) is recommended.

Audio*1

*1 Using the camera with audio.

Audio input/output feature (Microphone or speaker)

Hardware

Specification

Connecting 10 Cameras Connecting 4 Cameras

CPU: Pentium®4 3 GHz or

higher, or compatible processor

Memory: 512 MB or higher

CPU: Pentium 4 1.8 GHz or

higher, or compatible processor

Memory: 256 MB or higher

Operating Instructions

Table of Contents

1 Product Introduction.....................................................6

1.1 Included Accessories ..................................................................... 6

1.2 Important Information..................................................................... 7

1.2.1 Audio and Video Recording Notice............................................................ 7

1.2.2 Security Cautions ...................................................................................... 7

1.3 End-User License Agreement........................................................ 8

1.4 Looking at Installation Procedure................................................. 10

1.5 Installing This Software................................................................ 11

1.5.1 Modifying or Deleting This Software ........................................................ 17

1.6 Starting or Closing This Software ................................................ 18

1.6.1 Starting This Software ............................................................................. 18

1.6.2 Closing This Software.............................................................................. 19

1.7 Performing License Registration .................................................. 20

1.7.1 Registering a New License ...................................................................... 20

1.7.2 Performing Online Registration................................................................ 22

2 Software Operation .....................................................25

2.1 Selecting a Folder to Save Images .............................................. 25

2.2 Automatically Backing up Recorded Images................................ 28

2.3 Using a Proxy Server ................................................................... 30

2.4 Registering the Camera ............................................................... 32

2.4.1 Creating New Camera ............................................................................. 32

2.4.2 Editing Camera Information..................................................................... 40

2.5 Network Camera Recorder Window ............................................ 41

2.5.1 Monitoring Page....................................................................................... 47

2.5.2 Recorded Image Page............................................................................. 48

2.5.3 Timer List Page........................................................................................ 49

2.6 Monitoring the Camera ................................................................ 50

2.6.1 Monitoring the Camera ............................................................................ 50

2.6.2 Using Operation Bar ................................................................................ 51

2.6.3 Using Preset Buttons ............................................................................... 54

2.7 Recording the Image.................................................................... 55

2.7.1 Manually Recording the Image ................................................................ 55

2.7.2 Motion Detection Recording .................................................................... 57

2.7.3 Timer Recording ...................................................................................... 58

2.8 Playing the Recorded Images...................................................... 61

Operating Instructions

2.8.1 Playing the Recorded Images ................................................................. 61

2.8.2 Searching the Recorded Images............................................................. 65

2.9 Using Camera List........................................................................ 68

2.10 Enabling or Disabling the Cameras.............................................. 70

2.11 Deleting the Registered Cameras................................................ 71

2.12 Converting the Recorded Images ................................................ 72

2.12.1 Converting the Recorded Images to JPEG files...................................... 72

2.13 Other Features ............................................................................. 74

2.13.1 Importing the Camera Information........................................................... 74

2.13.2 Exporting the Camera Information .......................................................... 74

2.13.3 Copying the Recorded Images ................................................................ 75

2.13.4 Changing the Keyword of the Recorded Images ..................................... 75

2.13.5 Deleting the Recorded Images................................................................ 76

2.14 Error Message List....................................................................... 77

2.15 Troubleshooting............................................................................ 95

2.16 Default Setting List ....................................................................... 97

Index....................................................................................99

Operating Instructions

1 Product Introduction

1.1 Included Accessories

The following items are provided.

Note

User registration requires registration code shown on registration code

stickers. Affix the stickers to the case, the front or the back of Operating

Instructions to remember registration code and password.

CD-ROM Notice

• Do not scratch, smudge, write or label either CD-ROM surfaces. It may

become unreadable because of a scratch.

• Do not touch the CD-ROM surface and avoid leaving fingerprints on it. It may

become unreadable because of dust.

• Do not place the CD-ROM in any place where it will be subjected to direct sun-

light or high temperature such as around a heater. CD-ROM may become

unreadable because of change in shape.

• Do not throw or bend CD-ROM. CD-ROM may become unreadable because

of a scratch or change in shape.

• Do not play this CD-ROM in an audio CD player. Ear-splitting volume may

damage its speakers.

• CD-ROM.......................................................

• Operating Instructions (This Manual)............

• Registration code stickers............................

1 pc.

1 set (3 pcs.)

Operating Instructions

1.2 Important Information

1.2.1 Audio and Video Recording Notice

PLEASE NOTE that under certain circumstances, audio/video recording may be

PROHIBITED by law. This software should be used only in compliance with all

applicable federal, state and local statutes.

1.2.2 Security Cautions

When using this software, take appropriate measures to avoid the following

security breaches.

• Leaks of private information via this software

• Illegal use of this software by a third party

• Interference or suspension of the use of this product by a third party

Take the following measures to avoid security breaches:

• To prevent malicious attack to your PC or recorded images, keep newly

updating the installed software on your PC such as operating system, web

browser, antivirus software or Network Camera Recorder. (Perform the

version update to intensify the security).

• If you receive data from the Internet, perform the scan for malicious

program or removal of the computer virus.

• You are responsible for this product’s user information such as registered

camera information and recorded images. This information should not be

made available to any third parties outside the user group.

Panasonic Communications Co., Ltd.

Operating Instructions

1.3 End-User License Agreement

THIS IS A LEGAL AGREEMENT BETWEEN YOU AND PANASONIC

COMMUNICATIONS CO., LTD. ( "PANASONIC") WITH RESPECT TO THE

PANASONIC BB-HNP11 TRIAL VERSION SOFTWARE ("SOFTWARE").

CAREFULLY READ ALL THE TERMS AND CONDITIONS OF THIS

AGREEMENT PRIOR TO INSTALLING THE SOFTWARE. INSTALLING THE

SOFTWARE INDICATES YOUR ACCEPTANCE OF THESE TERMS AND

CONDITIONS.

If you do not agree to these terms and conditions, return all SOFTWARE items

(disk, written materials and packaging) to the place of purchase, for a refund. No

refund will be given unless all SOFTWARE items (disk, written materials and

packaging) are returned.

1. COPYRIGHT:

The SOFTWARE is protected by copyright laws and international treaty

provisions, and all other applicable laws. You acknowledge that you are

receiving only a LIMITED LICENSE TO USE the SOFTWARE and related

documentation, and that you shall obtain no title, ownership nor any other

rights in or to the SOFTWARE and its related documentation, all of which title

and rights shall remain with PANASONIC or its licensor.

2. LICENSE:

3. RESTRICTIONS:

You may not reverse engineer, decompile or disassemble the SOFTWARE,

except as expressly permitted by applicable laws. You may not use, copy,

modify, alter, rent, lease or transfer the SOFTWARE, its related

documentation, or any copies thereof, in whole or in part, except as expressly

provided in this Agreement. You may not export the SOFTWARE in

contravention of any applicable U.S. or foreign export laws and regulations.

(1) You may use the SOFTWARE solely for the purpose of recording and

processing images from one or more PANASONIC Network Cameras

which are compatible with the SOFTWARE.

(2) You may make a copy of the SOFTWARE for the use defined in

subparagraph (1) above, or for internal back-up purpose only.

(3) You may transfer your rights under this License Agreement on a

permanent basis, provided that you transfer this Agreement, all copies

of the SOFTWARE, all related documentation and your PANASONIC

Network Camera(s), and the recipient thereof agrees to the terms of

this Agreement.

Operating Instructions

4. TERM:

This license is effective until terminated. You may terminate this Agreement at

any time by destroying the SOFTWARE and related documentation and all

copies thereof. This license will be terminated if you fail to comply with any

term or condition of this Agreement. Upon such termination, you agree to

destroy the SOFTWARE, all copies thereof and related documentation.

5. LIMITED WARRANTY:

During the ninety (90) days after your purchase of the SOFTWARE,

PANASONIC warrants that the storage media on which the SOFTWARE is

furnished will be free from defect in materials and workmanship under normal

use, and that it will repair, or at its option replace, any defective media at no

charge to you, provided that such defective media is returned to your place of

purchase within such ninety (90) day period, along with a copy of the receipt

showing your date of purchase.

6. LIMITATION OF LIABILITY:

EXCEPT AS STATED ABOVE, PANASONIC DOES NOT MAKE OR PASS

ON TO YOU OR OTHER THIRD PARTY, ANY WARRANTY OR

REPRESENTATION INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE. PANASONIC MAKES NO WARRANTY THAT

THE SOFTWARE WILL BE ERROR-FREE OR THAT IT WILL MEET YOUR

REQUIREMENTS. PANASONIC SHALL NOT BE LIABLE FOR ANY

DAMAGES SUFFERED BY YOU INCLUDING, BUT NOT LIMITED TO,

CONSEQUENTIAL, INCIDENTAL, SPECIAL OR PUNITIVE DAMAGES,

EVEN IF PANASONIC HAS BEEN ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. NOTWITHSTANDING THE FOREGOING, IF THE

TERMS AND CONDITIONS HEREOF CONTRADICT THE LAWS OF THE

JURISDICTION IN WHICH YOU LIVE, THIS LICENSE AGREEMENT SHALL

BE MODIFIED TO THE EXTENT SUCH LAWS REQUIRE.

Operating Instructions

1.4 Looking at Installation Procedure

You must perform the following steps to use this software.

Read the End-User License Agreement (see page 8).

You cannot install this software if you disagree.

(The legal agreement is required when installing this software.)

Install this software (see page 11).

Perform the license registration (see page 20).

To use this software, perform the license registration by getting a license

key on online registration. (The attached registration code stickers are

required.)

Select the folder to save images (see page 25).

Configure the camera (see page 32).

Operate recording and monitoring the camera.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Panasonic Logiciel

Panasonic

Panasonic DMC-FS42 Lumix Manuel utilisateur

Panasonic

Panasonic Workio DP-3510 Manuel utilisateur

Panasonic

Panasonic Avccam AG-AF100A Series Manuel utilisateur

Panasonic

Panasonic Avccam AG-AF100A Series Manuel utilisateur

Panasonic

Panasonic BB-HPN15A Manuel d'instructions

Panasonic

Panasonic Workio DP-3510 Manuel utilisateur

Panasonic

Panasonic WJMPU955 - PROCESSING UNIT - TMU Manuel utilisateur

Panasonic

Panasonic Workio DP-2310 Manuel utilisateur

Panasonic

Panasonic PT-D10000 Series Instruction manuelle

Panasonic

Panasonic Avccam AG-AF100A Series Manuel utilisateur

Panasonic

Panasonic LightPen3 Manuel utilisateur

Panasonic

Panasonic PANATERM Ver. 3.7 Manuel utilisateur

Panasonic

Panasonic Workio DP-2310 Manuel utilisateur

Panasonic

Panasonic Australia Asset Library Manuel utilisateur

Panasonic

Panasonic AJ-SF771AP Manuel utilisateur

Panasonic

Panasonic SZ-CB8P Manuel utilisateur

Panasonic

Panasonic Voice Editing Ver.2.0 Manuel utilisateur

Panasonic

Panasonic RQT6118-Y Caractéristiques techniques

Panasonic

Panasonic WJMPU955 - PROCESSING UNIT - TMU Manuel utilisateur

Panasonic

Panasonic Avccam AG-AF100A Series Manuel utilisateur

Panasonic

Panasonic Workio DP-2310 Manuel utilisateur

Panasonic

Panasonic PT-LB90NT Manuel utilisateur

Panasonic

Panasonic WJ-ND300 Administrator Console Manuel utilisateur

Panasonic

Panasonic IMAGE STUDIO Ver.3.0.0 Manuel utilisateur

Manuels Logiciel populaires d'autres marques

COMPRO

COMPRO COMPROFM Manuel utilisateur

Muratec

Muratec OFFICEBRIDGE ONLINE Manuel utilisateur

Oracle

Oracle Contact Center Anywhere 8.1 Manuel utilisateur

Adobe

Adobe 65007312 - Photoshop Lightroom Manuel

Avaya

Avaya NULL One-X for RIM Blackberry Manuel utilisateur

HP ProLiant BL420c Manuel utilisateur

PS Audio

PS Audio PowerPlay Manuel du propriétaire

Brady

Brady LOCKOUT PRO 3.0 Manuel de service

Avaya

Avaya Interaction Center Manuel utilisateur

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manuel

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manuel utilisateur

Oracle

Oracle Application 9i Manuel utilisateur

Acer

Acer RDM Manuel utilisateur

Canon

Canon Vixia HF21 Manuel utilisateur

Canon

Canon ZR950 Manuel utilisateur

Samsung

Samsung Auto Backup Manuel utilisateur

Polycom

Polycom Vortex EF2201 Instructions d'installation et d'utilisation

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manuel utilisateur