Panasonic 4301 Manuel utilisateur

Panasonic Electric Works Fire & Security Technology Europe AB

Jungmansgatan 12, SE-211 19 Malmö, Sweden

Tel: +46 (0)40 697 70 00 • Fax: +46 (0)40 697 70 99

[email protected] • www.panasonic-fire-security.com

Fire alarm systems

Analog photoelectric

smoke detector

4301

•Constant sensitivity / Service signal at a fixed level of contamination

•New advanced algorithms and functions and yet compatible with older EBL systems

General

The photoelectric (optical) smoke detector

has a low profile design, unleaded

soldering and the latest IC technology,

which will secure the highest reliability

possible. In the detection chamber is a high-

efficient optical system consisting of an

LED and a photodiode with two lenses.

Scattered light (i.e. reflection of infrared

light) is used to detect smoke. The smoke

enters the detection chamber through an

insect filter and an optical labyrinth. This

construction not only improves the smoke

inflow but it also causes steam, fog, etc. to

condense into moisture on its surfaces, to

prevent false (nuisance) alarms.

The detector is supplied with two LEDs that

will light when the detector goes into alarm.

The detector is plugged in the analog base

3312x / 4313. The COM loop is connected

to the base, which also has terminals for an

external LED, e.g. 2218. The detector is

intended for indoor use in dry premises and

in the systems EBL512 / 128 / 1000 / 2000

depending on the detector mode.

Constant sensitivity

The detector maintains a constant sensitivity

regardless of its contamination. A service

signal will be given when the detector has

reached a service level.

Address / Detector mode

The address setting tool 3314 is used to set

the detector's COM loop address and the

detector mode NORMAL, 2330 or 2312 See

Planning Instructions for the system

respectively for more information about the

modes and functions.

•NORMAL mode (analog): Detector

4301 is used in the systems EBL512

(SW version > 2.0) and EBL128, also as

a spare part for the detector 3304 in

NORMAL mode.

•2330 mode (conventional): Detector

4301 is used in the systems EBL512/

1000/2000 as a spare part for the

detector 3304 in 2330 mode.

•2312 mode (analog): Detector 4301 is

used in the systems EBL512/1000/2000

as a spare part for the detector 3304 in

2312 mode.

The different modes have different functions

and features, e.g. in the 2330 mode, the

detector does the fire judgement but in the

NORMAL and 2312 modes this is done in

the c.i.e. The detector is prepared for an

"Advanced mode" to be used in conjunction

with future EBLxxx SW versions.

AI function

In the 2330 mode is the AI function used,

i.e.:

•Variable delay function, i.e. the delay

time before an alarm is influenced by

temporary smoke obscuration changes.

All technical features and data are subject to changes without notice, resulting from continuous development and improvement.

Product Leaflet Date of issue Revision / Date of revision

MEW00308 2003-04-24 6 / 2008-09-15

Type number

4301 Analog photoelectric smoke detector

COM loop

Ext. LED

SA(L)

C.i.e. EBL512 / EBL128

COM loop input

SB (C)

SB SB

E- E-

SA SA

E+ E+

Mark Mark

E-

SAo

E+

Mark

SAi

3312 4313 3312FL/F

In the detector: See also "Engineering Instructions for detectors Type 430x".

SA/SB Contact pins for COM loop / address setting tool 3314

E+/E- Contact pins for External LED

Tl Type number label; Detector type

Al Address label; For the programmed COM loop address to be written.

Lsh Locking screw hole (prepared for drilling through detector body)

Ls Locking screw

Prepared for mechanical locking with analog base 3312x / 4313. One hexagon socket screw

(Ls) is attached (1.5 mm Hex key to be used). The 2.5-2.7 mm hole (Lsh) has to be drilled.

Technical data

Voltage (V DC)

rated

allowed

normal (on COM loop)

12-30

Current consumption at nom. volt.

from COM loop (mA)

quiescent

active (incl. internal LED)

ext. LED (connected via base 3312)

0.3

2.3

max. 2

Ambient temperature (°C)

operating

storage

-10 to +50

-25 to +75

Ambient humidity (% RH) max. 95, non condensing

Ingress Protection rating (estimated) IP 51

Sensitivity (obscuration; %/m)

NORMAL mode

2330 mode

2312 mode

Depending on the mode.

3.6 / 3.0 / 2.4 (Low / Normal / High)

3.5 (Normal)

2.6

Size ∅x h (mm) 102 x 36

Weight (g) 68

Construction / Colour Modified polycarbonate / Grey (N8, Munsell colour code)

Approvals 05 EC Certificate no. 0786-CPD-20144, EN54-7

E-

E+

Lsh

The detector is plugged in the analog base 3312x / 4313.

The COM loo

/ Ext. LED are connected to the analo

base.

Table des matières

Autres manuels Panasonic Détecteur de fumée

Panasonic

Panasonic 4318 Manuel utilisateur

Panasonic

Panasonic EBL512 G3 5000 Manuel utilisateur

Panasonic

Panasonic MEW01 351 Manuel technique

Panasonic

Panasonic 3378 Manuel utilisateur

Panasonic

Panasonic EBL512 Manuel utilisateur

Panasonic

Panasonic 3377 Manuel utilisateur

Panasonic

Panasonic 1740 Manuel utilisateur

Panasonic

Panasonic EBL128 Manuel utilisateur

Panasonic

Panasonic 3333 Manuel utilisateur

Panasonic

Panasonic 2217 Manuel utilisateur

Panasonic

Panasonic 6295 Manuel utilisateur

Panasonic

Panasonic 4313 Manuel utilisateur

Panasonic

Panasonic EBL512 G3 5000 Manuel du propriétaire

Panasonic

Panasonic 3339 Manuel utilisateur

Panasonic

Panasonic 6363 Manuel utilisateur

Panasonic

Panasonic 3309 Manuel utilisateur

Panasonic

Panasonic 6362 Manuel utilisateur

Panasonic

Panasonic MEW00098 Manuel utilisateur

Panasonic

Panasonic EBL128 Manuel technique

Panasonic

Panasonic 2318 Manuel utilisateur

Panasonic

Panasonic 1828 Manuel utilisateur

Panasonic

Panasonic 3312F Manuel utilisateur

Panasonic

Panasonic EBL512 Manuel utilisateur

Panasonic

Panasonic 4375 Manuel utilisateur

Manuels Détecteur de fumée populaires d'autres marques

x-sense

x-sense SD19-W Manuel utilisateur

BRK electronic

BRK electronic First Alert P1010 Manuel utilisateur

FireAngel

FireAngel Thermoptek ST-622 Manuel utilisateur

teko

teko Astra-42A Manuel utilisateur

Safetec

Safetec SDS-2/6 Manuel du propriétaire

Siemens

Siemens PE-11C Manuel utilisateur

System Sensor

System Sensor DH500ACDC Manuel utilisateur

Resolution Products

Resolution Products RE612 CryptiX Manuel utilisateur

First Alert

First Alert PC900V Manuel utilisateur

Eminent

Eminent EM6590 E-Domotica Manuel utilisateur

Ei Electronics

Ei Electronics Ei Ei168RC Manuel utilisateur

Carrier

Carrier Kidde Quell Q301 Manuel utilisateur

VESDA

VESDA VLF-500 Manuel utilisateur

ELRO

ELRO FS8110 Manuel utilisateur

Heiman

Heiman SMOKI NS-626PHS Manuel utilisateur

Regin

Regin SDD-S65 Manuel utilisateur

Family Gard

Family Gard FG225 Manuel utilisateur

Greystone

Greystone DSD120 Manuel utilisateur