Panasonic A406 Manuel utilisateur

PRIMUSBUSINESS.CA

PRIMUS BUSINESS SERVICES

HOSTED PBX

PANASONIC A406 REPEATER QUICK SETUP

GUIDE

PANASONIC A406 REPEATER

QUICK SETUP GUIDE

Online instructional videos and manufacturer user guides are also available.

Visit www.primus.ca/hpbxguide for more information.

What You Need

Panasonic base unit and cordless

handset (model KX-TGP600) from

Primus Business Services

Panasonic DECT repeater (model

KX-A406) from Primus Business

Services

Hosted PBX service from Primus

Business Services

Before you Start

Your Panasonic base unit and cordless phone must be setup, turned on, and

functioning prior to installing the repeater. Please refer to the Panasonic TGP600

TPA60 TPA65 Quick Setup Guide, available at

www.primus.ca/hpbxguide

for more

information.

Registering the Repeater to the TGP600 Base

Unit

1. Plug the AC adapter into the repeater. Press the plug firmly to make sure it

is in place. There is a hook at the bottom of the unit to secure the cable in

place to prevent it from being accidentally pulled out. Do not plug in the AC

adapter into an electrical outlet yet.

PRIMUSBUSINESS.CA

PRIMUS BUSINESS SERVICES

HOSTED PBX

PANASONIC A406 REPEATER QUICK SETUP

GUIDE

2. On the base unit, press and hold the Handset locator button for 4 seconds

until the STATUS indicator flashes red. If all registered handsets start

ringing, press the same button to stop and repeat the step. The next step

must be completed within 90 seconds.

3. Plug the AC adaptor of the repeater to an electrical outlet.

4. On the repeater, the STATUS indicator and indicator will turn amber

for 2 seconds. When both indicator lights turn solid green, the repeater is

registered to the base unit and is ready to use.

5. On the base unit, exit registration mode by pressing the Handset locator

button.

NOTE:

Register repeaters one by one. Do not register multiple repeaters at the

same time.

PRIMUSBUSINESS.CA

PRIMUS BUSINESS SERVICES

HOSTED PBX

PANASONIC A406 REPEATER QUICK SETUP

GUIDE

If the indicator lights of the repeater do not turn green, make sure the

repeater is within range of the base unit and try again.

For wall mount instructions, see Panasonic DECT Repeater Installation

Manual for the KX-A406, available at http://primus.ca/business/hpbxguide.

For additional troubleshooting tips, please review the Hosted PBX Small

Office Basic Troubleshooting Guide, available at

http://primus.ca/business/hpbxguide.

If the configuration process was interrupted or if you need assistance, please

contact Primus HPBX Technical Support at 1-888-222-8577.

PRIMUSBUSINESS.CA

PRIMUS BUSINESS SERVICES

HOSTED PBX

PANASONIC A406 REPEATER QUICK SETUP

GUIDE

Registering the Repeater to Another Repeater

A repeater can be connected to another repeater in series to extend total coverage

to up to 150m. This can be done by registering the repeater to another repeater.

In the diagram above, the destination repeater is registered with the base unit, and

the origin repeater is connected in series to the destination repeater. This section

describes how to set up the origin repeater. Before you begin, you must

steps in the previous section on how to register a repeater to the base unit.

To register a repeater to another repeater, they must be set to the same ID.

On the destination repeater:

1. First check the ID of the repeater you are attempting to register to

(destination repeater). With the destination repeater turned on and

functioning normally, press the PROGRAM button located under the

destination repeater. Note the number of times the indicator flashes

green. This is the ID of the destination repeater – one flash indicates the ID

as 1, two flashes indicate the ID as 2, and so on.

2. Return the destination repeater back to normal operation by pressing the

PROGRAM button again. Both the and STATUS indicators should go

back to solid green.

On the origin repeater:

3. Turn on the repeater you want to register (origin repeater) by connecting the

AC adaptor. The STATUS indicator should be flashing red and the

indicator should be off.

4. On the origin repeater, press and hold the PROGRAM button for 5 seconds

until the STATUS indicator flashes green. Release the PROGRAM button.

(Destination

Repeater)

(Origin

Repeater)

PRIMUSBUSINESS.CA

PRIMUS BUSINESS SERVICES

HOSTED PBX

PANASONIC A406 REPEATER QUICK SETUP

GUIDE

The STATUS indicator will turn solid green, and the indicator will

flash red once to indicate that the ID is set to 1.

5. Set the ID of the origin repeater to be the same as the destination repeater.

If the ID of the destination repeater was not 1, press the PROGRAM button

on the origin repeater to select the ID that matches the destination repeater.

The ID will change by one each time the PROGRAM button is pressed.

(e.g., if you select ID 3 by pressing the button two times, the indicator

will flash 3 times)

6. Press and hold the PROGRAM button for 5 seconds to assign the ID to the

origin repeater. The indicator will turn solid red. Release the

PROGRAM button. The STATUS indicator and the indicator will turn

amber for 2 seconds and then the STATUS indicator will start flashing red,

indicating that the repeater is waiting to be found.

On the base unit:

7. On the base unit, press and hold the Handset locator button for 4 seconds

until the STATUS indicator flashes red.

8. Once the destination repeater finds the origin repeater, the STATUS

indicator on the origin repeater will turn solid green. Registration is

successful.

9. On the base unit, exit registration mode by pressing the Handset locator

button.

10. To verify whether the setup was successful, turn off the destination repeater

by unplugging the AC adapter. On the origin repeater, the STATUS indicator

and the indicator should both turn solid red, indicating that the

connection was lost. Turn the destination repeater back on by plugging in

the AC adapter. Both indicators on the destination repeater should turn

solid green, followed by the indicators on the origin repeater.

PRIMUSBUSINESS.CA

PRIMUS BUSINESS SERVICES

HOSTED PBX

PANASONIC A406 REPEATER QUICK SETUP

GUIDE

Optimizing Placement of the Repeater

The TGP600 base unit and A406 repeater has a maximum range of 50 meters.

However, for optimal synchronization between the base unit and the repeater, or

between two repeaters, the devices are recommended to be placed within a

maximum of 40m to 50m of each other. Range may vary depending on environment.

For maximum coverage and noise-free communications, place your repeater:

•at a convenient, high, and central location, such as on a wall, with no

obstructions between your phones and the repeater;

•away from electronic appliances such as TVs, radios, personal computers,

wireless devices or other phones;

•away from radio transmitters such as external antennas of mobile phone cell

stations (avoid putting the repeater on a bay window or near a window);

•away from objects that could interfere with reception such as wire fences,

thick walls, radiators, and metal shelving.

The repeater is for indoor use only.

To optimize the placement of your repeater:

1. Use the signal strength indicator on the TGP600/TPA60 cordless handset to

determine a viable location where you wish to extend the range of your base

unit. The signal strength should still be strong where the repeater will be

placed.

2. Once a suitable location for the repeater is found, turn on the repeater by

connecting the AC adaptor. If the indicator on the repeater turns red or

amber, this indicates that the signal strength is too weak for the repeater to

function. Re-position the repeater to a place where the indicator turns

green.

3. Check that that repeater is providing adequate coverage for your needs.

Using the signal strength indicator on the TGP600/TPA60 cordless handset,

PRIMUSBUSINESS.CA

PRIMUS BUSINESS SERVICES

HOSTED PBX

PANASONIC A406 REPEATER QUICK SETUP

GUIDE

walk to various areas where you may be using the phone, and confirm there

is adequate signal strength. If not, you may need to adjust the position of the

repeater, or install another repeater to further extend coverage area.

PRIMUSBUSINESS.CA

PRIMUS BUSINESS SERVICES

HOSTED PBX

PANASONIC A406 REPEATER QUICK SETUP

GUIDE

Optimizing Placement of the Repeater

(A vance )

The following instructions are for advanced users conducting a site survey to

determine the optimal placement of the repeater. These steps require the cordless

handset to operate in maintenance mode.

1. Press and hold the “power” key on the cordless handset until the

background of the display screen is light grey.

2. Release the “power” key and press and hold the “talk” key for about 10

seconds until the background of the display screen turns dark grey.

3. Release the “talk” key and press the following keys in sequence: Left soft

key, 8, 1. The display will show “Maintenance Mode”, with the firmware

version below it. Press “OK” to display the maintenance menu.

4. Then select “Base Monitor” and then “Current Base”.

PRIMUSBUSINESS.CA

PRIMUS BUSINESS SERVICES

HOSTED PBX

PANASONIC A406 REPEATER QUICK SETUP

GUIDE

5. Turn off the handset by pressing the “power” key, and then turn it back on

by pressing the “power” key. The handset will now be in site survey mode,

and display signal strength (RSSI) and connection status. Description of the

values are as follows (PS refers to the handset):

6. Walk around to confirm the service area. If the readings are acceptable, the

display will remain green. If the display turns red and the signal is weak,

install the repeater in the area right before it starts turning red.

7. Once the site survey is complete, revert the handset back to normal

operation. First, turn off the handset.

8. Go into Maintenance Mode by following steps 1 to 3.

9. Select “Base Monitor” and press “OK”.

10. Select “OFF” and press “OK”.

PRIMUSBUSINESS.CA

PRIMUS BUSINESS SERVICES

HOSTED PBX

PANASONIC A406 REPEATER QUICK SETUP

GUIDE

11. Turn the handset off and then turn it back on. The handset will be in normal

operation mode.

Table des matières

Autres manuels Panasonic Répétiteur

Panasonic

Panasonic VL-FAN2 Manuel utilisateur

Panasonic

Panasonic VL-FKD2 Manuel utilisateur

Panasonic

Panasonic VL-FKD2BX Manuel utilisateur

Panasonic

Panasonic WX-CR470 Manuel utilisateur

Panasonic

Panasonic KX-HNH200 Manuel utilisateur

Panasonic

Panasonic KX-A405 Manuel utilisateur

Panasonic

Panasonic VL-FAN1BX Manuel utilisateur

Panasonic

Panasonic KX-A272 Manuel utilisateur

Panasonic

Panasonic WX-CR480P Manuel utilisateur

Panasonic

Panasonic KX-A405 Manuel utilisateur

Panasonic

Panasonic VL-FKD2 Manuel utilisateur

Panasonic

Panasonic WX-CR470 Manuel utilisateur

Panasonic

Panasonic AJRP900 - DIGITAL TRIAX REPEAT Manuel utilisateur

Panasonic

Panasonic KX-A407 Series Manuel utilisateur

Panasonic

Panasonic KX-TGA405EX Manuel utilisateur

Panasonic

Panasonic KX-A405 Manuel utilisateur

Panasonic

Panasonic VL-FKD2AZ Manuel utilisateur

Panasonic

Panasonic VL-FKD2EX Manuel utilisateur

Panasonic

Panasonic WX-CR470 Manuel utilisateur

Panasonic

Panasonic KX-A406 Manuel utilisateur

Panasonic

Panasonic KX-A406 Guide d'installation et d'utilisation

Panasonic

Panasonic KX-A406 Manuel utilisateur

Panasonic

Panasonic AJ-RP900P Manuel utilisateur

Manuels Répétiteur populaires d'autres marques

Gigaset

Gigaset 108 Manuel utilisateur

Ace TECHNOLOGY

Ace TECHNOLOGY USR-1900A Manuel utilisateur

Kenwood

Kenwood TKR-750-850 Manuel de la liste des pièces

Asus

Asus RP-AC51 Manuel utilisateur

Exibel

Exibel HRP0101 Manuel utilisateur

Kidde

Kidde Vega Manuel utilisateur

Telcosat

Telcosat RBB 850 Guide d'installation

York

York Universal LINC485 Manuel utilisateur

MIKOM

MIKOM MRx01B Power Series Manuel utilisateur

Simrad

Simrad RD 301 Manuel utilisateur

Tait

Tait TB7304 Manuel utilisateur

R-tron

R-tron RSN-CDMA-37-C Manuel utilisateur

Inventronics

Inventronics DALI REPEATER SO Manuel utilisateur

XFP

XFP 16 Manuel utilisateur

Andrew

Andrew MRx18 Manuel utilisateur

COMBA

COMBA RXA3748 Manuel utilisateur

ADRF

ADRF SDR-ICS-43 Manuel utilisateur

Teltonika

Teltonika WRP100 Manuel utilisateur