Panasonic CF-VDW07CRFM Manuel utilisateur

Contents

Read Me First ................................. 2

First-time Operation ...................... 6

Starting Up/Shutting Down ......... 11

Touchscreen ................................ 13

Software Keyboard...................... 16

Battery Power .............................. 18

Setting the Wireless Display ...... 22

Changing the Wireless Display Settings ...

Magnetic Stripe Reader............... 29

Fingerprint Scanner .................... 30

Capturing the Screen .................. 33

Troubleshooting .......................... 34

Specifications .............................. 36

OPERATING INSTRUCTIONS

Please read these instructions carefully before using this product and save this manual for

future use.

Wireless Display

with Magnetic Stripe Reader

and Fingerprint Scanner

Model No. CF-VDW07CRFM

Information to the User

This product and your Health

This product, like other radio devices, emits radio frequency electromagnetic energy. The

level of energy emitted by this product however is far much less than the electromagnetic

energy emitted by wireless devices like for example mobile phones.

Because this product operates within the guidelines found in radio frequency safety stan-

dards and recommendations, we believe this product is safe for use by consumers. These

standards and recommendations reflect the consensus of the scientific community and result

from deliberations of panels and committees of scientists who continually review and inter-

pret the extensive research literature.

In some situations or environments, the use of this product may be restricted by the propri-

etor of the building or responsible representatives of the organization. These situations may

for example include:

Using this product on board of airplanes, or

In any other environment where the risk of interference to other devices or services is

perceived or identified as harmful.

If you are uncertain of the policy that applies on the use of wireless devices in a specific

organization or environment (e.g. airports), you are encouraged to ask for authorization to

use this product prior to turning on the product.

Regulatory Information

We are not responsible for any radio or television interference caused by unauthorized modi-

fication of this product. The correction of interference caused by such unauthorized modifi-

cation will be the responsibility of the user. We and its authorized resellers or distributors are

not liable for damage or violation of government regulations that may arise from failing to

comply with these guidelines.

Read Me First

Lithium Battery

Lithium Battery!

This wireless display contains a lithium battery to enable the date, time, and other data to be

stored. The battery should only be exchanged by authorized service personnel.

Warning! A risk of explosion from incorrect installation or misapplication may possibly occur.

Federal Communications Commission

Radio Frequency Interference

Statement

Note: This equipment has been tested and

found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide

reasonable protection against harmful

interference in a residential installation. This

equipment generates, uses and can radiate

radio frequency energy and, if not installed

and used in accordance with the instructions,

may cause harmful interference to radio

communications. However, there is no

guarantee that interference will not occur in

a particular installation. If this equipment

does cause harmful interference to radio or

television reception, which can be determined

by turning the equipment off and on, the user

is encouraged to try to correct the interference

by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equip-

ment and receiver.

Connect the equipment into an outlet on a

circuit different from that to which the re-

ceiver is connected.

Consult the Panasonic Service Center or

an experienced radio/TV technician for

help.

Warning

To assure continued compliance, use only

shielded interface cables when connecting to

a computer or peripheral. Also, any changes

or modifications not expressly approved by

the party responsible for compliance could

void the user’s authority to operate this equip-

ment.

This device complies with Part 15 of the FCC

For U.S.A.

Rules. Operation is subject to the following

two conditions:

(1) This device may not cause harmful

interference, and

(2) This device must accept any interference

received, including interference that may

cause undesired operation.

Responsible Party:

Panasonic Corporation of North America

One Panasonic Way

Secaucus, NJ 07094

Tel No:1-800-LAPTOP5

(1-800-527-8675)

FCC RF Exposure Warning:

This equipment complies with FCC radiation

exposure limits set forth for an uncontrolled

environment.

This equipment must be installed and oper-

ated in accordance with provided instructions.

This transmitter must not be co-located or

operated in conjunction with any other an-

tenna or transmitter.

Notice for the products using LCD

This product uses one or more fluorescent

lamps containing a small amount of mercury.

It also contains lead in some components.

Disposal of these materials may be regulated

in your community due to environmental con-

siderations. For disposal or recycling infor-

mation please contact your local authorities,

or the Electronics Industries Alliance:

<http://www.eiae.org.>

Care should be exercised with regard to the

following in order to avoid the possibility

of overheating, fire, or damage.

Avoid Heat

Do not throw the battery pack

into a fire or expose it to exces-

sive heat.

Keep Articles Away

Do not place the battery pack to-

gether with articles such as neck-

laces or hairpins when carrying or

storing.

Do Not Disassemble

Do not insert sharp objects into the

battery pack, expose it to bumps

or shocks, deform, disassemble, or

modify it.

Do Not Short

Do not short the positive (+) and

negative (-) contacts.

Avoid Extreme Heat, Cold and

Direct Sunlight

Do not charge, use or leave the bat-

tery pack for extended periods

where it will be exposed to direct

sunlight, in a hot place (in an au-

tomobile on a sunny day, for ex-

ample), or in a cold place.

Do Not Use With Any Other

Equipment

The battery pack is rechargeable

and was intended for the specified

equipment or charger. Do not use

it with an equipment other than the

one for which it was designed.

Precautions (Battery Pack)

Read Me First

Do not touch the terminals on the battery pack.

The battery pack may no longer function prop-

erly if the contacts are dirty or damaged.

Do not expose the battery pack to water, or

allow it to become wet.

If the battery pack will not be used for a

long period of time (a month or more),

charge or discharge (use) the battery pack

until the remaining battery level becomes

30% to 40% and store it in a cool, dry place.

This equipment prevents overcharging of

the battery by recharging only when the re-

maining power is less than approx. 95% of

capacity.

The battery pack is not charged when the

equipment is first purchased. Be sure to

charge it before using it for the first time.

When the AC adaptor is connected to the

equipment, charging begins automatically.

Should the battery leak and the fluid get into

your eyes, do not rub your eyes. Immedi-

ately flush your eyes with clear water and

see a doctor for medical treatment as soon

as possible.

Do Not Put into a Microwave

Do not put the battery pack into a

microwave oven or a pressurized

chamber.

Stop Using

Should the battery emit an abnor-

mal odor, become hot to the touch,

become discolored, change shape,

or become in any way different

from normal, remove it from the

equipment and stop using it.

Do not use this wireless display

with a battery pack other than the

one specified (the one included with

the wireless display or the specified

battery pack sold separately)

Illustration in this manual

Some of the illustrations in this manual may differ slightly in shape from the actual items

in order to make the explanation easier to understand.

If the user has logged on without the administrator authority, some functions may not be

executable, and some screens may not be displayed as shown in this manual. If this hap-

pens, log on with the administrator authority to enable these functions.

The “CD/DVD drive” is a description about drives, such as DVD-ROM, CD-ROM, CD-

R/RW, and DVD-ROM & CD-R/RW drives.

Confirm the latest information on optional products in catalogs, etc.

The procedure in this manual uses the method or view of the Windows XP default setting

(not Classic view or Classic Start menu etc.).

Microsoft®, MS-DOS®and Windows®are registered trademarks of Microsoft Corporation in

the United States and/or other countries.

Panasonic®is a registered trademark of Matsushita Electric Industrial Co., Ltd.

NOTE

The battery pack may become warm during recharging or normal use. This is com-

pletely normal.

Recharging will not commence outside of the allowable temperature range (0 °C to

45 °C {32°F to 113 °F}) page 18. Once the allowable range requirement is

satisfied, charging begins automatically. Note that the recharging time varies based

on the usage conditions. (Recharging takes longer than usual when the temperature

is 10 °C {50 °F} or less.)

If the temperature is low, the operating time is shortened. Only use the equipment

within the allowable temperature range.

The battery pack is a consumable item. If the amount of time the equipment can be run

by using a particular battery pack becomes dramatically shorter and repeated recharging

does not restore its performance, the battery pack should be replaced with a new one.

When a spare battery pack is to be carried in a pocket or bag, it is recommended that

it be placed in a plastic bag so that its contacts are protected.

Always power off the equipment when it is not in use. Leaving the equipment on

when the AC adaptor is not connected will exhaust the remaining battery capacity.

Precaution

Avoiding low-temperature burns

Avoid more than casual contact with any heat producing area of the equipment,

AC adaptor, and any option or accessory you use with it. Even low heat, if

warmer than body temperature, can cause a burn, if the skin is exposed to the

heat source for a long enough period of time.

First-time Operation

<Front>

Power Switch

Battery pack status

page 18

Power status

Not lit: Power off

Green: Power on

LCD

Capture Button

Menu Button

page 14

R-Button R-BUTTON

CAPTURE

page 22

This wireless display features a touchscreen function, which makes computer operation pos-

sible by simply touching the surface of the wireless display.

Operating Instructions ............ 1Wireless Display........................ 1

Model No : CF-VZSU21Model No : CF-AA1623A

Battery Pack ......... 1AC Adaptor ...........1 AC Cord ................1

The stylus is in the wireless

display at the time of pur-

chase. ( page 13)

LED Indicator

page 29

Magnetic Stripe Reader

page 33

Names and Functions of Parts

Soft Cloth.............. 1

Stylus....................1 CD-ROM ................1

<Back>

Fingerprint Scanner

page 30

Battery Pack

DC-IN Jack DC-IN 16V

Stylus page 20

<Top>

A lithium ion battery that is recyclable powers the product you

have purchased. Please call 1-800-8-BATTERY for informa-

tion on how to recycle this battery.

NOTE

Select [Disabled] with the following procedure.

[start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] -

[Device Manager] - [Network adapters] - [PRISM2 IEEE 802.11 PC CARD Adapter]

- [Advanced] - [Driver based IBSS]

Strap

Install MeiWDS Program/Software Keyboard

Install MeiWDS program:

1Place the CD-ROM attached to the wireless display into the CD/DVD drive.

2Select [start] - [Run], input [x:\meiwds\setup.exe]*1and select [OK].

Follow the on-screen instructions.

3Restart the computer.

4After restart, the Wireless Display Setup Utility (MeiWDS) icon will appear on

the taskbar.

For information on how to use MeiWDS: page 28

Install Software Keyboard:

1Place the CD-ROM attached to the wireless display into the CD/DVD drive.

2Select [start] - [Run], input [x:\softkb\setup.exe]*1and select [OK].

Follow the on-screen instructions.

For information on how to use software keyboard: page 16

*1“x:” is the drive letter of the CD/DVD drive. Change this to match the drive letter on your own

computer.

CAUTION

Prepare the CD-ROM, which is attached to the wireless display, and the CD/DVD drive.

Install the software to the computer compatible to the wireless LAN.

When you are using the computer with Windows XP Service Pack 2, perform the

following procedure after installing MeiWDS program.

1Select [start] - [Control Panel] - [Network and Internet Connections] - [Change

Windows Firewall settings] - [Exceptions] - [Add Program], then select [Browse...].

2Select [c:\Program Files\Panasonic\MeiWDS\MeiWds], then select [Open],

and then select [OK].

The Fast User Switching function is not supported.

If the Fast User Switching function is turned on, the [MeiWDS] screen will appear

when starting the computer. When the screen appears, select [OK], and remove

the check mark from [Use Fast User Switching] in [start] - [Control Panel] - [User

Accounts] - [Change the way users log on or off] and then select [Apply Options].

The screen will not appear, and the Fast User Switching function will be turned

off.

NOTE

First-time Operation

2Connect the wireless display to a power outlet and turn

on the wireless display. ( page 12)

3The following screen should appear. Power

Switch

Connector

Latch

Tab

CAUTION

1Slide the latch to the right, and open the cover, then in-

sert the battery pack in the wireless display. After in-

serting the battery pack, close the cover, then slide the

latch to the left.

Setup the Wireless Display

Be sure to insert the battery pack as illustrated.

NOTE

The wireless display will turn off automatically

after 10 minutes have elapsed. In this case, start

the procedure from step 2.

Select [AdHoc].

Select network type.

AdHoc Infrastructure Cancel

Set the computer’s parameters for wireless LAN functions and TCP/IP.

Set Network Type, SSID, WEP Encryption, IP Address, and NetMask according to the

above screen. (In the above settings, Network Type is shown as “AdHoc” in some cases,

while a term such as “Peer-to-Peer Group” is used here.)

5Select [Connect] on <Wireless display screen> of step 4.

First-time Operation

Change setting on host PC to the following

value, reboot the host PC, then select

"Connect" below.

Connect Cancel

Wireless LAN card

Network Type : AdHoc

SSID : cfvdw07-xxxxx

WEP Encryption : disable

TCP/IP Class A Class B Class C

IP Address : 10.57.148.205

NetMask : 255.0.0.0

MeiWDS

AES Encryption : disable

Password : wdsp

(This screen is a sample.)

AES: Advanced Encryption Standard

4The following screen should appear.

Table des matières

Autres manuels Panasonic Moniteur

Panasonic

Panasonic AK-HVF100G Manuel utilisateur

Panasonic

Panasonic BT-LH1710 - Professional - LCD Production... Manuel utilisateur

Panasonic

Panasonic WVCM1450 - COLOR MONITOR Manuel utilisateur

Panasonic

Panasonic TH-37PG9W Manuel utilisateur

Panasonic

Panasonic BTH1700BP - IND. MONITOR Manuel utilisateur

Panasonic

Panasonic PT-42PD1-P Operating Manuel utilisateur

Panasonic

Panasonic WVCM2080 - COLOR MONITOR Manuel utilisateur

Panasonic

Panasonic TH-80SF2HU Manuel utilisateur

Panasonic

Panasonic TH-50BT300U Manuel utilisateur

Panasonic

Panasonic BT-LH910G Manuel utilisateur

Panasonic

Panasonic TH-50PB2W Manuel utilisateur

Panasonic

Panasonic PANASYNC P15 Manuel utilisateur

Panasonic

Panasonic CT-34WDM60 Manuel utilisateur

Panasonic

Panasonic CT-26WC15 Manuel utilisateur

Panasonic

Panasonic TH50PF9UK - 50" Plasma Panel Manuel utilisateur

Panasonic

Panasonic TH-50PHW3 Manuel utilisateur

Panasonic

Panasonic TH-47LFT30W Manuel utilisateur

Panasonic

Panasonic TH-98SQ1W Manuel utilisateur

Panasonic

Panasonic TH-85PF12E Manuel utilisateur

Panasonic

Panasonic 58PF12UK - TH - 58" Plasma Panel Manuel utilisateur

Panasonic

Panasonic TH-37PH10UK Manuel utilisateur

Panasonic

Panasonic TH-47LFT30W Manuel utilisateur

Panasonic

Panasonic PT-50PD3 Operating Manuel utilisateur

Panasonic

Panasonic TH42LF20U - 42" HD LCD TV Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation

LG M1950D-PZ Manuel utilisateur