Panasonic EP30007KX Manuel utilisateur

Using the stretch massage

Warning

Make sure there are no people or pets behind the unit when the arm stretch function is turned“on.”

Failure to observe this precaution may result in accident or injury.

•

Caution

Do not use with any pre-existing condition of shoulder injury.

Doing so may result in injury.

•

When Pre-Program and Quick Massage are selected, the leg stretch is turned on and the arm stretch is turned off, respectively.

When Self-Program and Manual Operation are selected, the stretch massage for all parts is turned off.

1Open the left cover.

2Press the or buttons to turn the functions off or on.

Display

To execute the stretch massage only

After turning on the power by pressing the button,

press the (stretch legs) or (stretch

arm) buttons.

The power will turn off automatically if no operation is

executed for 3 minutes.

•

The display will indicate if the stretch function is turned

on or off.

(The lamp is turned on: [ON], the lamp is turned off: [OFF])

Arm stretch

Leg stretch

Operations of the leg stretch

1. After grasping the legs with air, the

legs are stretched as the legrest is

lowered approximately 10 degrees

from the massage position.

2. Once the legrest returns to the original

angle, the legrest is then lowered

approximately 30 degrees to stretch

the legs further.

3.When the operation is complete, the

legrest will return to the angle at the

time before the operation.

Lowered by

approximately

10 degrees

Lowered by

approximately

30 degrees

Operations of the arm stretch

1.The backrest will come fully up.

One arm will inﬂate to ﬁrmly secure

the arm/hand in place.

2. After the backrest reclines

approximately 20 degrees to stretch

the arm, the backrest will come back

up 5 degrees.

Then, the backrest will recline approximately

10 degrees to stretch the shoulders and

arms further.When the operation is

complete, the backrest will return to the

angle at the time before the operation.

•

Ottoman and Backrest height adjustment

Adjusting the reclining angle and the angle of the legrest

1Press the button to turn on the power.

2Press the or button to adjust the angle.

Movement will continue until a “beep-beep-beep”sound is heard if the buttons are held down.

The legrest will start to move shortly after the backrest.

Approx. 85˚

Approx. 120˚

Approx.

170˚

If the backrest reclines to an angle where you

cannot touch the buttons on the control panel from

the seat, hold the control panel in your hand.

Approx. 0˚

•

Extending out the legrest

1Slide the legrest to your favorite position by pulling the legrest slide lever.

(The legrest will slide approximately 5" (12 cm).)

Pull the legrest slide

lever back.

Push with soles of feet and

the legrest slides out.

Raise legs slightly and legrest returns.

2Release the legrest slide lever when it reaches your favorite position.

Legrest slide lever

Adjusting the voice guidance volume

Press the button to adjust the volume.

VolumeDisplay

“Off” “Soft” “Medium”

Default Setting “Loud”

The single beep (when a

button is pressed) and the

triple beep (when the

adjustable setting limit is

reached) will always be

audible.

Press the button to shift

the volume level by one

up/down.

Adjusting the control panel stand and pillow

Adjusting the control panel stand

The direction of the pivoting stand can be adjusted.

Front/Back

Left/Right

Ball joint

Adjusting the pillow for correct height during a massage

1. Remove the pillow. 2. Adjust the height of the pillow so that the

bottom edge is at ear level. 3. Attach the pillow on the velcro

fasteners.

Pillow

If positioned too low, the pillow may

interfere with a massage of the area

around the neck.

Lower edge

of the pillow

Ear level

When the reclining angle changes, the

position of the pillow may shift. In that

case, adjust the position again.

•

Pillow

Velcro

fasteners

Advanced user memory function

The user memory function retains the adjustments for a massage, such as “REPEAT” function or “BACK INTENSITY,” so that the

massage will start with the saved settings.

Saving the user program settings

See page 40 for the settings that can be saved.

After completing the massage, or when the massage is stopped by pressing the , the

buttons will ﬂash and the unit ready to save any settings that changed during the

massage.

1Press the button for the program settings that you want to save while the

buttons ﬂash (for approximately 15 seconds).

The program settings have been saved when the button you pressed and the user memory display turn on.

When the selected button starts ﬂashing quickly

Other settings are already saved.

To update with new program settings, press the same button again.

To maintain the saved programs, press a different button.

The operation must be executed within approximately 15 seconds after the button starts ﬂashing quickly.

When you want to use your saved massage settings

1Press the button to turn on the power.

The power will turn off automatically if no operation is executed for 3 minutes without performing massage.

2Press the button used to save your settings.

The user memory display turns on.

3Select from Pre-Program, Quick Massage, Self-Program, or Manual Operation.

Massage starts without pressing the button.

It is also possible to change the settings. In that case, press button after the settings are changed.

4The massage will start after body scanning is completed.

•

Settings that can be saved

The latest settings entered by the user during programs or manual operation will be saved.

For Pre-Program, Quick Massage, and Self-Program

Settings other than the massage style will be saved as common settings.

Ultra Knead/Repeat/Position

Settings for 8 different times for the respective programs

can be saved.

If the number of saved settings exceeds 8, the oldest one

will be deleted.

See pages 27 to 28 for detailed functions.

•

Style

The massage style that is selected last will be saved.

Settings for an entire program will be saved.

See pages 27 and 29 for detailed functions.

•

Leg stretch settings

Air massage settings

Self-program levels

Intensity of massage heads

For Manual Operation

Leg stretch settings

Air massage settings

Massage style

Massage head position Speed, tapping, regional rolling, auto width

Massage action

settings

Note: The following will not be saved:

Reclining angle

Length of ottoman extension

Arm stretch settings

Manual operation settings

* Massage intensity

•

Erasing saved data

1Press the button to turn on the power.

The power will turn off automatically if the massage does not start within 3 minutes after turning on the power.

2Press the button corresponding to the settings you wish to delete.

Only the button pressed will illuminate.

3Conﬁrm the program selection buttons ﬂash.

4Press the same button again and hold for 3 or more seconds.

The pressed button will ﬂash.

5Press the button once again while it is ﬂashing (for approximately 15 seconds).

The change from ﬂashing to steady indicates that the deletion is complete.

•

After completing the massage

The massage will be completed in approximately 15 minutes. For a quick massage, 5 minutes.

Since the foot section pivots, the legrest will return to a down and retracted position so that you can safely sit up. To return the

back of the chair to the original position, press the button twice. The chair does not automatically come up since you

may be resting comfortably.

Interrupting the massage

1Return the legrest to the original position and then press the button.

The massage heads move to the retracted position.

The legrest lowers and the backrest rises automatically.The backrest will move after the massage heads retract.

Pull the legrest

slide lever back. Raise the legs

slightly and the

legrest returns.

When the massage is complete

The buttons will ﬂash and the unit ready to save any settings that changed during the massage.

Not saving the settings

It is not necessary to operate.The operation will complete after approx. 15 seconds.

Saving the settings

See pages 39 to 41 “Advanced user memory function.”

Emergency Stop

1Press the button.

All operations will stop immediately.

The user program will not be saved in this case.

Get off the unit carefully to prevent the unit tipping over.

•

Disconnecting the power

Warning

After use, always slide the power switch to the“off” position, turn the lock switch to the“lock”position and remove

the lock switch key.

Failure to observe this precaution may result in accident or injury due to children playing with the controls.

•

Caution

Always hold the power plug, not the power cord, when unplugging from an outlet.

Failure to observe this precaution may result in electric shock or short-circuit.

Unplug the power plug from the outlet when the unit is not in use.

Failure to observe this precaution may result in electrical ﬁre due to deterioration of insulation caused by dust and moisture.

Keep the lock switch key out of reach of children.

Failure to observe this precaution may result in accident or injury due to accidental ingestion or children playing with the

controls.

•

1Slide the power switch to the“off”

position. 2Turn the lock switch key to the “lock”

position.

Power supply box

3Remove the power plug from the

electrical outlet. 4The lock switch key must be stored

out of the reach of children.

Autres manuels pour EP30007KX

Table des matières

Langues :

Autres manuels Panasonic masseur

Panasonic

Panasonic EP-1082 Manuel utilisateur

Panasonic

Panasonic EP1082KL-COMBO Manuel utilisateur

Panasonic

Panasonic EW-NA72 Manuel utilisateur

Panasonic

Panasonic EP1285 Manuel utilisateur

Panasonic

Panasonic EP571 - MASSAGE LOUNGER Manuel utilisateur

Panasonic

Panasonic EP3513CU Operating Manuel utilisateur

Panasonic

Panasonic EP790-C1 Manuel utilisateur

Panasonic

Panasonic EP-MA20KU Manuel utilisateur

Panasonic

Panasonic SW50 Manuel utilisateur

Panasonic

Panasonic EP 578 Manuel utilisateur

Panasonic

Panasonic EP30005KU Manuel utilisateur

Panasonic

Panasonic EP1022 - MASSAGE LOUNGER Manuel utilisateur

Panasonic

Panasonic EP-MA70 Manuel utilisateur

Panasonic

Panasonic EP-MA10 Manuel utilisateur

Panasonic

Panasonic EP-MA20KU Manuel utilisateur

Panasonic

Panasonic EP3205R2 Manuel utilisateur

Panasonic

Panasonic Wedeatsu Wave EP1272 Manuel utilisateur

Panasonic

Panasonic EP1014-U1 Manuel utilisateur

Panasonic

Panasonic Great Escape EP518 Manuel utilisateur

Panasonic

Panasonic EV-326 Manuel utilisateur

Panasonic

Panasonic Real Pro Ultra EP30004 Manuel utilisateur

Panasonic

Panasonic EP-MA97 Manuel utilisateur

Panasonic

Panasonic EP-MA10 Manuel utilisateur

Panasonic

Panasonic EP1285 Manuel utilisateur

Manuels masseur populaires d'autres marques

ELEEELS

ELEEELS P2 Manuel utilisateur

Cenocco

Cenocco CC-9111 Manuel utilisateur

Human Touch

Human Touch NOVO Manuel utilisateur

Adler

Adler AD 2167 Manuel utilisateur

Taurus

Taurus Wellness TW-MC-M Manuel utilisateur

Infinity

Infinity Syner-D Circadian Manuel utilisateur

Hydas

Hydas LH-095 Manuel utilisateur

AEG

AEG FM 5567 Manuel utilisateur

OBH Nordica

OBH Nordica Shiatus Tunes Manuel utilisateur

Hutech

Hutech Q9 Manuel utilisateur

Medisana

Medisana MM 825 Manuel utilisateur

SOLAC

SOLAC Therma Hydro Manuel utilisateur

Invacare

Invacare Texas Manuel utilisateur

Casada

Casada Bismarck II Manuel utilisateur

Fujiiryoki

Fujiiryoki Cyber-Relax EC-1700 Manuel utilisateur

Medisana

Medisana HM 886 Manuel utilisateur

HoMedics

HoMedics BA-C200 Manuel utilisateur

Repose

Repose Lynton Manuel utilisateur