Panasonic Section 770 Manuel utilisateur

Section 770

Voice Recognition

Phone

User Guide

Issued 3/23/98

543X02401

The contents of this manual are subject to change without notice and do not constitute a

commitmentonthepartofPanasonicTelecommunicationSystemsCompany(PTSC).Everyeffort

has been made to ensure the accuracy of this document. However, due to ongoing product

improvements and revisions, Panasonic cannot guarantee the accuracy of printed material after the

date of publication, nor can it accept responsibility for errors or omissions. Panasonic will update

and revise this document as needed.

The software and hardware described in this document may be used or copied only in accordance

with the terms of the license pertaining to the said software or hardware.

576-10-770 DBS 576 - Issued 3/23/98 3

Contents

Introduction ...................................................................5

Names and Functions of Parts ....................................6

Chapter 1.Making an Outside Call (or an Internal Call) .8

Chapter 2.Adding a Phonebook Entry.......................10

Chapter 3.Modifying a Phonebook Entry..................14

Modifying Names ......................................................................................................................14

Modifying a Telephone Number................................................................................................17

Chapter 4.Deleting a Phonebook Entry.....................21

Deleting Individual Phonebook Entries.....................................................................................21

Deleting All Phonebook Entries ................................................................................................24

Chapter 5.Tuning the Commands to Your Voice......26

Chapter 6.Resetting the System ................................30

4DBS 576 - Issued 3/23/98 576-10-770

576-10-770 DBS 576 - Issued 3/23/98 5

Introduction

The incorporation of a voice recognition unit (VB-44101) in a soft-key

telephone (VB-44224) allows you to choose between voice-activated dialing

or normal keying in. You can simply speak names stored in the Phonebook to

initiate a call to that destination.

This manual describes how to use voice-activated dialing and how to record

names, etc. See the Operation Instruction (Section 700) for details of normal

key operations.

This manual consists of the following chapters:

•We recommend storing your spoken commands in your own voice in

the system to improve the performance of voice recognition.

Chapter Content Reference page

1. Making outside call

(or Internal call) Describes how to make calls to exchange (or in-

ternal) numbers by speaking names recorded in

the Phonebook 8

2. Adding a Phonebook

Entry Describes how to record names and phone num-

bers in the Phonebook 10

3. Modifying a Phone-

book Entry Describes how to change names and phone num-

bers recorded in the Phonebook 14

4. Deleting a Phonebook

Entry Describes how to delete names and phone num-

bers from the Phonebook 21

5. Tuning the commands

to Your Voice Describes how you, as user, store your spoken

commands in the system for use as a reference. 26

6. Resetting The System Describes how to reset the system to its state

when shipped (The original non-specific "user"

voice is restored and the contents of the Phone-

book deleted.)

CAUTION:

•If the system cannot recognize your spoken commands, operate by

keys. There is no key equipped on the telephone corresponding to

"Repeat" command.

•Your spoken command can be recognized only during Large LED

(Message LED) lights Red.

•When a spoken command is not recognized, an error tone is gener-

ated. At this point, make sure your spoken command is valid and

try again.

•Once entering the voice recognition made, to turn to the OFF-

HOOK Monitor mode is not available. To use OFF-HOOK Moni-

tor mode, lift the handset and press ON/OFF Key, then press

START Key.

6DBS 576 - Issued 3/23/98 576-10-770

Names and Functions of Parts

1) Handset

The receiver for speaking into.

2) Cancel Key (Soft Key [MODE])

Cancels an operation and returns execution to the TOP MENU.

3) Soft Key [END]

Press if, during operation, the following voiced commands are not

recognized.

(Number, System, Call)

4) Soft Key [EXEC 1]

Press if, during operation, the following voiced commands are not

recognized.

(Yes, Complete, Change, List, Name, Delete All, Train)

5) Soft Key [EXEC 2]

Press if, during operation, the following voiced commands are not

recognized.

(Go Back, No, Program, Add, Back Space, Delete, Reset)

6) START/END Key (FF 12 Key)

Press to start and end voice operations.

This operation is available only for Handset communication.

1. Handset

6. START/END Key

7. REDIAL Key

8. Telephone number button

9. VOLUME Key

4. Soft Key [EXEC 1]

2. (Soft Key [Mode])

3. Soft Key [END]

5. Soft Key [EXEC 2]



TOP MENU



READY CALL

PROGRAM CHANGE

Section 770 Voice Recognition Telephone

576-10-770 DBS 576 - Issued 3/23/98 7

Note 1: Even if some feature access code is assigned on FF12 Key, (there is

no error tone when storing some feature on it.) this key can work as

START/END Key only, when the Voice Recognition Adapter is

attached on the phone.

2: "Initializing •••••" is displayed and FF12 Key blinks Green when

initializing the system. During this period, to enter the voice

recognition mode is not available even if the FF12 Key is pressed.

3: After entering the Voice Recognition mode by pressing FF12 Key,

the LED of other FF keys go OFF even if the COs are in use or

some features registered on are activated.

Once getting off this mode, LEDs return to the original status.

7) REDIAL Key

Use this key to insert a pause when recording a phone number.

8) Telephone number button

Use these buttons for entering telephone numbers when recording and

modifying entries.

9) VOLUME Key

The volume can be adjusted in 5 steps. Press the button to increase the

volume, or the button to decrease the volume. When you replace the

handset, the volume is reset to the medium value.

Page 8 DBS 576 - Issued 3/23/98 576-10-770

Chapter 1. Making an Outside Call

(or an Internal Call)

You can call a number simply by speaking a name stored in the Phonebook.

This Chapter describes the procedure.

Notes: •The name and number must be stored in the Phonebook. (See

Chapter 2, "Making a Phonebook Entry" on page 10.)

1. Lift the handset and listen for the dial tone.

2. Press the START/END Key (FF12 Key)

The dial tone stops and Voice Guidance asks "Call Who?"

Note: If no names or telephone numbers have been stored in the

Phonebook, the TOP MENU is displayed. When you say "call" at

this point, "Phonebook Empty" will be heard. This is your cue to

store names and telephone numbers in the Phonebook. (See page

10.)

3. After confirming the Large LED (Message LED) lights Red,

speak the name of the person you wish to call.

The system searches the Phonebook for the name closest to the

one you have spoken, and Voice Guidance then asks "mm"

Right?" to confirm the selection (mm). The telephone number is

displayed on the 1st display.

Note: Speak the name using the same voice you used to store the

name in the Phonebook. Using a different tone of voice may result

in the name not being retrieved.

Example:To call "Panasonic"

Say "Panasonic."ÕVoice Guidance responds with the

question '"Panasonic" Right?'

Note: Your voice will not be recognized if you call the name before

the Large LED lights RED.

4. If the name spoken by Voice Guidance is correct, say "Yes." If

not, say "No."

•"Yes"

The Splash tone sounds and the telephone number is dialed.

Start talking when the phone is answered.

NAME TO CALL ?

GO BACK

(FF12)



TOP MENU



READY CALL

PROGRAM CHANGE

01045939

NO YES

01045939

Chapter 1. Making an Outside Call (or an Internal Call) Section 770 Voice Recognition Telephone

576-10-770 DBS 576 - Issued 3/23/98 Page 9

•"No"

The search continues to the next closest name in the Phonebook.

Voice Guidance then asks "" Right?" to confirm the

selection (). The telephone number is displayed on the 1st

display. If this is not the desired number, say "No" to repeat the

search one more time. If there is no registration close to your

pronunciation, an error tone will be issued. If, on the 3rd

attempt, the correct number is not found, operation returns to

"Call Who?". One possibility is that you are saying the name

using a different tone or in a different manner from that

originally used to record it in the Phonebook. Try saying the

name again.

Notes: •If the search fails to find a candidate, Voice Guidance says

"No other choices." You may have spoken the name using

a different tone or a different manner from that originally

used to record it in the Phonebook, or a name that is not in

the Phonebook. Replace the handset to cancel the call,

check the contents of the Phonebook, then try to place the

call again. At most three candidates are presented. They

are the names in the Phonebook that are the closest the

names you spoke. If ambient sounds, etc., result in the

spoken words sounding totally different from any

candidates in the Phonebook, the search is cancelled

before the 3rd try.

•If you do not hear any Voice Guidance after saying "Yes"

(or "No"), press the Soft Key [EXEC].

5. On completion of the call, replace the handset.

Notes: •If you cannot catch the message spoken by Voice Guidance, say

"Repeat" to repeat the message.

•To abort the call at any point before saying "Yes," simply replace

the handset.

•You can say "Cancel" (or press the Cancel Key) at any point to

display the TOP MENU, allowing you to store new entries or edit or

delete existing entries. This function can be useful if you want to

check the contents of the Phonebook while making a call, or add (or

delete) an entry after completing a call, etc.

•If you do not speak or press any keys for three minutes, the Voice

Recognition mode is ended.

10:00 SAT JAN 10

-EXT100 100

Section 770 Voice Recognition Telephone Chapter 2. Adding a Phonebook Entry

10 DBS 576 - Issued 3/23/98 576-10-770

Chapter 2. Adding a Phonebook Entry

This Chapter describes how to record names and telephone numbers in the

Phonebook.

Store your voice in a quiet surroundings as much as possible.

You can store entries for up to 100 seconds in the Phonebook. (For example,

if each name takes 2 seconds to speak, you can store 50 entries. The

maximum recording time for each entry is 2.5 seconds.)

Note: If you do not hear Voice Guidance in response to saying "Go Back",

"Program," "Add," "Yes," "Back Space," or "Complete," press the Soft Key

[EXEC] next to the characters on the screen.

1. Lift the handset and listen for the dial tone.

2. After confirming the Large LED (Message LED) lights RED,

press the START/END (FF12 Key).

The dial tone stops and Voice Guidance asks "Call Who?"

Note: If no names or telephone numbers have been stored in the

Phonebook, the TOP MENU is displayed.

3. Say "Go Back."

The TOP MENU is displayed and Voice Guidance responds

with "Ready."

4. Say "Program."

Voice Guidance responds with "Which mode?"

5. Say "Add."

Voice Guidance responds with "Name please."

•If the Phonebook memory is full

The following message is displayed on the screen and Voice

Guidance says "Phonebook Full sorry." Replace the handset and

cancel recording. If you want to add another entry to the

Phonebook, you must first delete any unwanted entries. (See

Chapter 4, "Deleting Phonebook Entry" (page 21).)

6. Say the name of the person or company, etc., for which you are

making an entry in the Phonebook.

NAME TO CALL ?

GO BACK

(FF12)

READY CALL

PROGRAM CHANGE

PROGRAM SYSTEM

ADD DELETE ALL

NAME TO ADD ? #1

GO BACK

PHONEBOOK FULL

Table des matières

Autres manuels Panasonic Téléphone IP

Panasonic

Panasonic KX-UTG200 Manuel utilisateur

Panasonic

Panasonic KX-UT248 Manuel utilisateur

Panasonic

Panasonic KX-UT133-B Manuel utilisateur

Panasonic

Panasonic T-Mobile KX-HDV130 Manuel utilisateur

Panasonic

Panasonic KX-TVM50 Mode d'emploi

Panasonic

Panasonic KX-UTG200 Manuel utilisateur

Panasonic

Panasonic KX-TGP500 Manuel utilisateur

Panasonic

Panasonic KX-NT265X Manuel utilisateur

Panasonic

Panasonic KX-TGP600 Manuel utilisateur

Panasonic

Panasonic KX-TD500 Manuel utilisateur

Panasonic

Panasonic KX-HDV430 Manuel de service

Panasonic

Panasonic KX-UTG200 Manuel utilisateur

Panasonic

Panasonic KX-HDV100 Manuel de service

Panasonic

Panasonic DIgital Super hy KX-T7425 Manuel utilisateur

Panasonic

Panasonic KX-DT543 Guide de référence

Panasonic

Panasonic KX-T7453 Manuel utilisateur

Panasonic

Panasonic KX-WT115BX Manuel utilisateur

Panasonic

Panasonic KX-TGP600 Manuel de service

Panasonic

Panasonic DECT Portable Station KX-TCA256 Manuel utilisateur

Panasonic

Panasonic KX-NT400 Manuel utilisateur

Panasonic

Panasonic KX-UT123 Manuel utilisateur

Panasonic

Panasonic KX-UT133-B Manuel de service

Panasonic

Panasonic KX-TGP500 Manuel

Panasonic

Panasonic KX-TPA60 Manuel utilisateur

Manuels Téléphone IP populaires d'autres marques

Alcatel

Alcatel 4028 Manuel utilisateur

Polycom

Polycom Polycom VVX 600 Manuel utilisateur

Polycom

Polycom SoundPoint IP 450 Manuel utilisateur

Cisco

Cisco SPA-500 Series Manuel utilisateur

Polycom

Polycom SoundPoint IP 650 Manuel utilisateur

Proximus

Proximus Maestro 3016 IP Manuel utilisateur

Fanvil

Fanvil X4 Manuel utilisateur

Cisco

Cisco 7962 Manuel utilisateur

Snom

Snom 320 Manuel utilisateur

Yealink

Yealink Yealink SIP-T46G Manuel utilisateur

Avaya

Avaya 4625SW Manuel utilisateur

Yealink

Yealink SIP-T52S Manuel utilisateur

Nortel

Nortel 1140E Manuel utilisateur

Nexotek

Nexotek NT-P500 Manuel utilisateur

Avaya

Avaya Integral 5 R3.0 Manuel utilisateur

GE 28320EE2 - Dect 6.0 InfoLink 2 Manuel utilisateur

Avaya

Avaya 4600 Series Manuel de service

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Manuel utilisateur