Panasonic SC-HT545W Manuel utilisateur

RQT8737-2B

Operating Instructions

DVD Home Theater Sound System

Model No. SC-HT545W

All necessary steps of setup are completed.

Please see the Operations Guide for playback operations.

STEP1Positioning the speakers

STEP2Speaker connections

STEP3Digital transceiver connection

STEP4Audio, video and radio connections

STEP5AC mains lead connections

STEP6Preparing the remote control

STEP7Presetting the radio stations

STEP8Performing QUICK SETUP

Setup Guide

RQT8737-2B.fm Page 1 Tuesday, May 9, 2006 4:41 PM

How you set up your speakers can affect the bass and the sound field. Note the following points:

≥Place speakers on flat secure bases.

≥Placing speakers too close to floors, walls, and corners can result in excessive bass. Cover walls and windows with thick

curtains.

≥Left and right speakers are interchangeable, but front and surround speakers are not.

≥Place the front, center, and surround speakers at approximately the same distance from the seating position.

The angles in the diagram are approximate.

≥Use only supplied speakers

Using other speakers can damage the unit, and sound

quality will be negatively affected.

≥Set the speakers up on an even surface to prevent them

from falling. Take proper precautions to prevent the

speakers from falling if you cannot set them up on an

even surface.

This unit

[Note]

≥Keep your speakers at least 10 mm away from the

system for proper ventilation.

≥To allow for proper ventilation and to maintain good

airflow around this unit, position it with at least 5 cm of

space on all sides.

≥Do not block the ventilation holes of this unit.

Center speaker

≥Vibration caused by the center speaker can disrupt the

picture if it is placed directly on the television. Put the

center speaker on a rack or shelf.

≥To prevent the speakers from falling, do not place directly

on top of the television.

Wireless system

≥Place the wireless system within approximately 10 m

from this unit.

≥Do not use the wireless system or the digital transceiver

in a metal cabinet or bookshelf.

Subwoofer

Place to the right or left of the television, on the floor or a

sturdy shelf so that it will not cause vibration. Leave about

30 cm from the television.

Caution

Do not touch the netted area

of the speakers.

STEP1Positioning the speakers

Setup example

This unit

(with digital transceiver)

FRONT

(L, R)

SURROUND

(L, R)

CENTER

SUBWOOFER

Connect the supplied speakers and subwoofer to this unit only.

Do not attempt to connect the supplied speakers and subwoofer

to the external amplifier and so on.

WIRELESS

SYSTEM

e.g. Front speaker

RQT8737-B.fm P age 2 Friday, April 7, 2006 4:38 PM

Notes on speaker use

≥You can damage your speakers and shorten their useful

life if you play sound at high levels over extended periods.

≥Reduce the volume in the following cases to avoid

damage:

– When playing distorted sound.

– When the speakers are reverberating due to a record

player, noise from FM broadcasts, or continuous

signals from an oscillator, test disc, or electronic

instrument.

– When adjusting the sound quality.

– When turning the unit on or off.

If irregular coloring occurs on your television

The front and center speakers are designed to be used

close to a television, but the picture may be affected with

some televisions and setup combinations.

If this occurs, turn the television off for about 30 minutes.

The demagnetizing function of the television should correct

the problem. If it persists, move the speakers further away

from the television.

∫Avoiding interference

To avoid possible interference, do not place the wireless system near any of the following devices.

The wireless system uses the same radio frequencies as other devices that may be present in your home.

The wireless system will automatically seek a clear channel if any of these other devices interfere with its communication.

When this happens, the wireless link indicator (“ [W] ”) flashes on this unit, and there is a brief interruption in audio coming

from the surround speakers.

This is the normal operation of the product working to assure the best possible performance of your Home Theater System.

If the interference persists, try moving the other devices to another location outside the range of the wireless system.

Caution

≥This unit and the supplied speakers are to be used

only as indicated in this setup. Failure to do so may

lead to damage to the amplifier and/or the

speakers, and may result in the risk of fire. Consult

a qualified service person if damage has occurred

or if you experience a sudden change in

performance.

≥Do not attempt to attach these speakers to walls

using methods other than those described in this

manual.

2.4GHz-band microwave oven

2.4GHz-band cordless phone

personal computer with 2.4GHz-band

wireless LAN

e.g.

RQT8737-B.fm P age 3 Wednesday, April 12, 2006 2:08 P

Connecting the surround speaker cables to the wireless system

STEP2Speaker connections

SURROUND

Rch

SURROUND

Rch

FRONT

WOOFER

SUB

Lch

Lch Lch

CENTER

Lch

SURROUND

FRONT

SUB

WOOFER

FRONT

CENTER

Rch

FRONT

Lch

CENTER

1 sheet of speaker cable stickers

≥Attach the speaker-cable stickers to make connection easier.

Speaker cable sticker

2FRONT (R)

1FRONT (L)

5CENTER

This unit

Insert the wire fully.

i: White

j: Blue

Push!

6SUBWOOFER

Be careful not to cross

(short-circuit) or

reverse the polarity of

the speaker wires as

doing so may damage

the speakers.

Rch

SURROUND

Lch

SURROUND

Wireless system

Click!

Insert the wire fully.

i: White

j: Blue

4SURROUND (R)

3SURROUND (L)

RQT8737-B.fm P age 4 Friday, April 7, 2006 4:38 PM

≥Do not connect through the video cassette recorder.

Due to copy guard protection, the picture may not be displayed properly.

≥Turn the television off before connecting, and refer to the television’s operating instructions.

To improve picture quality, you can change the video signal output from the SCART (AV) terminal.

Select “RGB/No Output” from QUICK SETUP (➜page 11).

≥This connection will also enable you to play audio from your television through your home theater system.

Refer to “Operating other equipment” (➜page 39, Operations Guide).

Connecting to a television with SCART (AV) terminal

STEP3Digital transceiver connection

Digital Transceiver

FM ANT

COMPONENT VIDEO OUT

VIDEO

S-VIDEO

OUT

This unit Insert the digital transceiver

into the slot.

Do not insert or remove

while this unit is on.

Digital transceiver

Insert fully until you hear a click.

Digital transceiver

STEP4Audio, video and radio connections

COMPONENT VIDEO OUT

VIDEO

OUT

S-VIDEO

OUT

AUX

Digital Transceiver

Back of this unit

Television

(not included)

Scart cable (not included)

≥To listen to the sound from the

television, select the appropriate

audio out (e.g., Monitor) on the

television.

Sound from the television

Press [EXT-IN] to select the “TV” audio input

on the remote control (➜page 39,

Operations Guide).

RQT8737-B.fm P age 5 Friday, April 7, 2006 4:38 PM

∫Television with an S-VIDEO IN terminal

The S-VIDEO OUT terminal achieves a more vivid picture than the VIDEO OUT terminal by separating the chrominance

Connecting to a television with AUDIO/VIDEO terminals

Using other video connections for improved picture quality

COMPONENT VIDEO OUT

S-VIDEO

OUT

AUX

VIDEO

OUT

Digital Transceiver

AUDIO

OUT

VIDEO IN

AUDIO

VIDEO OUT

Television

(not included)

Back of this unit

Video cable

(not included)

Audio cable§

(not included)

§This audio connection will enable you to play audio from your television through your home theater system.

Refer to “Operating other equipment” (➜page 39, Operations Guide).

COMPONENT VIDEO OUT

AUX

VIDEO

OUT

S-VIDEO

OUT

Digital Transceiver

AUDIO

OUT

AUDIO

VIDEO OUT S-VIDEO

Television

(not included)

S-video cable

(not included)

Back of this unit

Audio cable§

(not included)

§This audio connection will enable you to play audio from your television through your home theater system.

Refer to “Operating other equipment” (➜page 39, Operations Guide).

RQT8737-B.fm P age 6 Friday, April 7, 2006 4:38 PM

∫Television with COMPONENT VIDEO IN terminals

The COMPONENT VIDEO OUT terminals provides a purer

picture than the S-VIDEO OUT terminal. These terminals

can be used for either interlaced or progressive output.

Connection using these terminals outputs the colour

difference signals (PB/PR) and luminance signal (Y)

separately in order to achieve high fidelity in reproducing

colours.

≥The description of the component video input terminals

depends on the television or monitor

(e.g. Y/PB/PR, Y/B-Y/R-Y, Y/CB/CR). Connect to terminals of

the same colour.

≥When making this connection, select “Video/YPbPr”

(Video and YPbPr) or “S-Video/YPbPr” (S-Video and

YPbPr) from QUICK SETUP (➜page 11). If “RGB/No

Output” (RGB only) is selected, the RGB signal is output

from the SCART (AV) terminal, but no signal is output

from the component video output terminals.

To enjoy progressive video

≥Connect to a progressive output compatible television.

≥Set “Video Output Mode” to “480p” or “576p”, and then follow the instructions on the menu screen (➜page 28,

Picture Menu, Operations Guide).

≥Panasonic televisions with 625 (576)/50i·50p, 525 (480)/60i·60p input terminals are progressive compatible.

Consult the manufacturer if you have another brand of television.

S-VIDEO

OUT

AUX

VIDEO

OUT

COMPONENT VIDEO OUT

Digital Transceiver

VIDEO IN

S-VIDEO

COMPONENT

VIDEO IN

AUDIO

OUT

Television

(not included)

Back of this unit

Video cables

(not included)

Audio cable§

(not included)

§This audio connection will enable you to play audio from your television through your home theater system.

Refer to “Operating other equipment” (➜page 39, Operations Guide).

RQT8737-B.fm P age 7 Friday, April 7, 2006 4:38 PM

Connecting the FM and AM antennas

Adhesive tape

This unit

AM loop antenna

Stand the antenna up on its base.

Place the antenna where reception is best.

Keep loose antenna cable away from other

wires and cables.

Click!

AM loop antenna FM indoor antenna

FM indoor antenna

Affix this end of the antenna where

reception is best.

≥Using an outdoor antenna (optional) (➜page 35, Operations Guide).

Re-tighten the

terminal screw.

Loosen the terminal screw with

a Phillips-head screwdriver.

White

Red Black

While pushing, insert the wire fully.

RQT8737-B.fm P age 8 Friday, April 7, 2006 4:38 PM

Conserving power

This unit and the wireless system consume a small amount of power when they are in standby mode (this unit: approx.

0.5 W, wireless system: approx. 4 W). To save power when they are not to be used for a long time, unplug them from the

household mains socket. You will need to reset some memory items after plugging in this unit.

[Note]

The included AC mains leads are for use with this unit and wireless system only. Do not use them with other equipment.

Also, do not use cords for other equipment with this unit or wireless system.

STEP5AC mains lead connections

AC IN~

2 AC mains leads

To household mains socket

(AC 230–240 V, 50 Hz)

AC mains lead

≥Connect the AC mains leads after all other connections are complete.

This unit

BE SURE TO READ THE CAUTION FOR THE

AC MAINS LEAD ON PAGE 4 IN THE

OPERATIONS GUIDE BEFORE CONNECTION.

AC mains lead

To household mains socket

(AC 230–240 V, 50 Hz)

Wireless system

RQT8737-2B.fm Page 9 Tuesday, May 9, 2006 6:13 PM

Do not:

≥mix old and new batteries.

≥use different types at the same time.

≥heat or expose to flame.

≥take apart or short circuit.

≥attempt to recharge alkaline or manganese batteries.

≥use batteries if the covering has been peeled off.

Mishandling of batteries can cause electrolyte leakage

which can severely damage the remote control.

Remove the batteries if the remote control is not going to be

used for a long period of time. Store in a cool, dark place.

∫Use

Aim at the remote control signal sensor (➜page 17,

Operations Guide), avoiding obstacles, at a maximum

range of 7 m directly in front of the unit.

Up to 15 stations can be set in each band, FM and AM.

STEP6Preparing the remote control

R6/LR6, AA

Remote control Batteries

Insert so the poles (iand j) match those in the remote

control.

≥Do not use rechargeable

type batteries.

STEP7Presetting the radio stations

ENTER

TUNER/BAND

Numbered

buttons

TUNING

-TUNE MODE

1Press [TUNER/BAND] to select “FM” or “AM”.

2Press [-TUNE MODE] to select “MANUAL”.

Each time you press the button: MANUAL()PRESET

3Press [XTUNING W] to tune to the preferred

frequency.

≥To start automatic tuning, press and hold

[XTUNING W] until the frequency starts scrolling.

Tuning stops when a station is found.

4While listening to the broadcast

Press [ENTER].

5While the frequency and “PGM” are flashing on the

display

Press the numbered buttons to select a channel.

≥To select a 2-digit number

e.g. To select 12:

[S10] ➜[1] ➜[2]

Alternatively, press [X,W], and then press [ENTER].

Confirming the preset channels

1Press [TUNER/BAND] to select “FM” or “AM”.

2Press [-TUNE MODE] to select “PRESET”.

Each time you press the button: MANUAL()PRESET

3Press the numbered buttons to select the channel.

≥To select a 2-digit number

e.g. 12: [S10] ➜[1] ➜[2]

Alternatively, press [X,W].

e.g. Display

DISC SFC

D.MIX

MONO

SLP

e.g. Display

DISC SFC

D.MIX

MONO

SLP

RQT8737-B.fm P age 10 Wednesday, April 12, 2006 2:10 P

Autres manuels pour SC-HT545W

Table des matières

Autres manuels Panasonic Système de cinéma maison

Panasonic

Panasonic SC-PT450 Manuel utilisateur

Panasonic

Panasonic SC-RT30 Manuel utilisateur

Panasonic

Panasonic SA-HT885WEG Manuel utilisateur

Panasonic

Panasonic SC-PT860 Manuel utilisateur

Panasonic

Panasonic SC-HT700 Manuel utilisateur

Panasonic

Panasonic SCHTB70 Manuel utilisateur

Panasonic

Panasonic SC-BTT785 Manuel utilisateur

Panasonic

Panasonic SCBT300 - BLU-RAY DISC HOME THEATER SOUND... Manuel utilisateur

Panasonic

Panasonic SC-XH70 Manuel utilisateur

Panasonic

Panasonic SC-PT956 Manuel utilisateur

Panasonic

Panasonic SC-BTT490 Instructions d'utilisation

Panasonic

Panasonic SC-PT550 Manuel utilisateur

Panasonic

Panasonic SCHT440 - RECEIVER Manuel utilisateur

Panasonic

Panasonic SC-BTT370 Instructions d'utilisation

Panasonic

Panasonic SCBT230 - BLU RAY HOME THEATER SYSTEM Instructions d'utilisation

Panasonic

Panasonic SC-BTT100 Manuel utilisateur

Panasonic

Panasonic SC-HTE50 Manuel utilisateur

Panasonic

Panasonic SA-HT740P Manuel utilisateur

Panasonic

Panasonic SCHT680 - RECEIVER W/5-DISK DV Manuel utilisateur

Panasonic

Panasonic SC-PT470 Manuel utilisateur

Panasonic

Panasonic SCHT17 - A/V RECEIVER Manuel utilisateur

Panasonic

Panasonic SC-HT535 Manuel utilisateur

Panasonic

Panasonic SA-BT235P Manuel utilisateur

Panasonic

Panasonic SC-HTB770 Manuel utilisateur

Manuels Système de cinéma maison populaires d'autres marques

Samsung

Samsung HT-ES4200K Manuel utilisateur

Harman Kardon

Harman Kardon HS 100 Manuel utilisateur

Samsung

Samsung HT-P10 Manuel utilisateur

Philips

Philips HTS5131 Mode d'emploi

Goodmans

Goodmans GDVD19SWS Manuel utilisateur

Moxi

Moxi media center Manuel utilisateur

Samsung

Samsung HT-EM35 Manuel utilisateur

LG HE903PAW Manuel utilisateur

Bose

Bose SoundTouch 520 Manuel utilisateur

Sony

Sony BDV-N990W Manuel utilisateur

Manta

Manta GK-500 Manuel utilisateur

Sharp

Sharp SBW800 Manuel utilisateur

Philips

Philips HTS3541 Manuel utilisateur

LG LHT799 Manuel utilisateur

Samsung

Samsung HT-TWZ415 Manuel utilisateur

Loewe

Loewe REFERENCE 52 SL FHD+ 200 NMP Manuel utilisateur

Samsung

Samsung AH68-02166R Manuel utilisateur

RCA

RCA 600-Watt Manuel utilisateur