Panasonic KX-VC2000 Instructions de montage

Confirm that the other equipment (display, video

cameras, etc.) is connected to the HD

Communication Unit, and the power is turned

on for all the equipment.

When the mark is displayed;

When the connection cannot be established:

When there is a problem with the connection, or with one of the connected devices,

or when there is a device that is not connected, the "—" mark will be displayed.

Check that the devices being used are properly connected to the main unit, that the

power is turned on for all connected devices, and that no more than 5 boundary

microphones (digital interface type) are connected.

Press [STATUS].

Press [BACK] to return

to the previous screen.

The following methods can also be used to make a call.

Calling from the Call History Calling by entering an address directly

You can also enter a speed dial number, which are displayed in

numerical order (1 to 600), to select the party you want to call.

During multiple-party video conference calls, a dialogue box

to select the party whom you want to disconnect is displayed.

Press [END]. The Home screen is displayed.

When there is an incoming call ring and a dialogue box is

displayed, press [START].

If Automatic Answer is set, when a video conference call is

incoming the call will be automatically answered after one

ring, and transmission then begins.

Basic Operation Guide

HD Visual Communication Unit Model No.

Starting a Video Conference

Before Starting a Video Conference

Starting a Video Conference

Press [HOME].

Press a "One-Touch Connection number (1-5)".

Select "Contact List" using [▲][▼]and press [ENTER].

Select the entry you want to call using [▲][▼][◄][►].

Select "Profile" using [▲][▼]and press [ENTER].

Select the profile you want to use to make a call using [▲][▼].

Press [START] to start the call.

Calling Using One-Touch Connection number From the

Home Screen

Press [MENU].

Calling from the Contact List Answering a Video Conference Call

Ending a Video Conference Call

Press [MENU].

Calling using a Profile

Turn on the power to the

main unit.

The Home screen is displayed.

• The information registered in the selected

One-Touch Connection number is displayed.

KX-VC1600A/KX-VC1300A

KX-VC2000/KX-VC1600/KX-VC1300/KX-VC1000/

KX-VC2000SX/KX-VC1600SX/KX-VC1300SX/

KX-VC1000SX/KX-VC1600A/KX-VC1300A

KX-VC2000/KX-VC1600/KX-VC1300/KX-VC1000/

KX-VC2000SX/KX-VC1600SX/KX-VC1300SX/

KX-VC1000SX/KX-VC1600A/KX-VC1300A

Press the

button

Remote Control Operation

Frequently used functions are assigned their own buttons

on the remote control for easy operation.

Useful Functions (Audio)

End CallStart Call

Color Buttons

Camera Zoom

Change to

PC Screen

Change to

Sub Video

Camera Image

During a video conference call, the "VOLUME" can

be adjusted.

During a video

conference call:

Green LED (on)

MIC Mute: Red LED (on)

[ ] Increase the volume

[ ] Decrease the volume

[Up] Tilt upwards

[Down] Tilt downwards

[Left] Pan left

[Right] Pan right

[ ] Zoom in

[ ] Zoom out

Using the

remote control: Using the microphone unit:

When the call ends, the volume will return to the pre-set value.

Useful Functions (Video) Useful Functions (Other)

To end the sharing of contents, press [CAMERA MAIN].

Status Display

End Contents

Sharing

Change

Screen Layout

Connect to

the Sub jack

of HDMI.

Connect to

the HDMI

jack of PC In.

Switch to the shared

content's image

Switch to the Camera's

image

Ex.: Using a single screen during single

stream communication

MIC Mute status

During a video conference call, press [CAM CTRL] to control the other party's video

camera.

Other site

This

site

This site Other site This site

Microphone

Mute

Other site

MG-HDCE036EN

Basic Operation Guide

HD Visual Communication Unit Model No.

Useful Operations

Adjusting the Volume

During a video conference call, press [LAYOUT].

Changing the Screen Layout

You can control a connected PTZ (Pan/Tilt/Zoom) camera.

Press the [LAYOUT] button repeatedly to cycle through

the difference layout configurations.

Controlling a Video Camera

You can share the contents of a computer's screen or the image of the sub video

camera with the other party.

The other party's image is displayed again.

Supported Resolutions PC: Full-HD, WSXGA+, UXGA, WXGA++, WXGA+, FWXGA, SXGA,

WXGA, HD, XGA, SVGA, VGA / Sub Video Camera: Full-HD, HD

Displaying a Computer's Screen or the Sub Video Camera's Image

During a video conference call, you can mute the microphone (MIC MUTE) so that your

voice cannot be heard by the other party.

Muting the Microphone

The volume can be adjusted during a video

conference call.

The remote control included with the HD

Visual Communication Unit can be used to

adjust the volume of the unit itself.

Likewise, the display's remote control can

be used to adjust the volume of the display.

Ex.: Sub-site, 1 display, Single stream communication

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Panasonic Système de conférence

Panasonic

Panasonic SC-HG1-ETC Manuel utilisateur

Panasonic

Panasonic KX-HTS Series Manuel utilisateur

Panasonic

Panasonic KX-VC1600SX Manuel utilisateur

Panasonic

Panasonic WGAV120 - VIDEO TRANSMISSION Manuel utilisateur

Panasonic

Panasonic KX-VC300CN Manuel utilisateur

Panasonic

Panasonic KX-VC300 Manuel utilisateur

Panasonic

Panasonic KX-NS1000 Manuel utilisateur

Panasonic

Panasonic KX-VC600 Manuel utilisateur

Panasonic

Panasonic KX-TS730C Manuel utilisateur

Panasonic

Panasonic KX-TVS110 Manuel utilisateur

Panasonic

Panasonic SC-HG1-ETC Manuel utilisateur

Panasonic

Panasonic EtherCAT SC-GU3-03 Manuel utilisateur

Panasonic

Panasonic KX-HTS Series Manuel utilisateur

Panasonic

Panasonic KX-NS700G Manuel utilisateur

Panasonic

Panasonic WXC3010 - CENTER MODULE - MULTI LANGUAGE Manuel utilisateur

Panasonic

Panasonic WX-CT2020 Manuel utilisateur

Panasonic

Panasonic WX-CT420 Manuel utilisateur

Panasonic

Panasonic KX-HTS Series Manuel utilisateur

Panasonic

Panasonic KX-VC300 Manuel utilisateur

Panasonic

Panasonic KX-TS700B Manuel utilisateur

Panasonic

Panasonic KX-VC300 Manuel utilisateur

Panasonic

Panasonic KX-VC300 Manuel utilisateur

Panasonic

Panasonic WX-C1011 Series Manuel utilisateur

Panasonic

Panasonic Attune WX-C3010 Manuel utilisateur

Manuels Système de conférence populaires d'autres marques

Kramer

Kramer VIA GO Manuel utilisateur

AVT

AVT MAGIC AC1 Go Manuel utilisateur

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Manuel utilisateur

Sony

Sony PCS-I150 Manuel utilisateur

Middle Atlantic Products

Middle Atlantic Products VTC Series Manuel utilisateur

Prentke Romich Company

Prentke Romich Company Vanguard Plus Mode d’emploi

Speakerbus

Speakerbus iD 712 Manuel utilisateur

Trelleborg

Trelleborg SafePilot CAT PRO Manuel utilisateur

Sennheiser

Sennheiser ADN Manuel utilisateur

ADTRAN

ADTRAN NetVanta 7100 Manuel utilisateur

AINA

AINA PTT Voice Responder Manuel utilisateur

Yamaha

Yamaha ProjectPhone PJP-100H Manuel utilisateur

vissonic

vissonic VLI Series Manuel utilisateur

Poly

Poly Trio 8300 Manuel utilisateur

Crestron

Crestron Mercury CCS-UCA-SMK Dessin dimensionnel

Inmarsat

Inmarsat mini M Manuel utilisateur

Tenveo

Tenveo ALL-IN-ONE Manuel utilisateur

AXIWI

AXIWI AT-350 Manuel utilisateur