Panasonic KXF-033C Manuel utilisateur
Operating Instructions
Model No. KXF-033C
KXF-713C
Thank you for purchasing LD10F/ LD10B, the slotted magazine loader ST.
Before placing the machine in service, be sure to read the instruction manual for
proper usage.
After that, store it carefully and it if necessary.
Slotted Magazine Loader ST LD10F/LD10B
Page 3
033C-E-OMA00-C01-00
M11E
WARNING
DO NOT ALLOW ANY PERSON WHO HAS NOT RECEIVED SPECIAL
TRAINING TO OPERATE THE MACHINE.
The machine may be operated improperly and injure you.
Either carry out training by yourself, or consult the manufacturer.
Page 4
DESCRIPTION OF MANUAL CONTENTS
This specifications consist of the following some contents. Please use it according to your work.
DESCRIPTION OF MANUAL CONTENTS
033C-E-OMA00-C01-00
This is the manual for the machine operators, and describes
about operating procedure, cautions and information which is
necessary for operation.
LD10F-M
Part 1. Operating manual
This is the manual for the machine maintenance, and describes
about daily check, adjustment and exchange of consumers.
Also, the troubleshooting is included.
Part 2. Maintenance manual
This is the manual for the machine operators, and describes
about operating procedure, cautions and information which is
necessary for operation.
LD10B-M
Part 3. Operating manual
Parts constructions of each unit is indicated individually by the
exploded view.
Use this for parts order or confirmation of parts construction.
This is the manual for the machine maintenance, and describes
about daily check, adjustment and exchange of consumers.
Also, the troubleshooting is included.
Part 4. Maintenance manual
LD10F/B-M
Part 5. Parts List
Operating Instructions
Page 2
CONTENTS
SAFETY PRECAUTIONS
033C-E-OMA00-B03-00
1FUNCTIONS
1-1 Operation Process Flow Chart................................................................1-1
2SPECIFICATIONS
2-1 Specifications of Machine .......................................................................2-1
2-1-1 Outline Specifications .............................................................................2-1
2-1-2 Outer Dimension (Stocker after Stacking up) .........................................2-2
2-1-3 Specifications of Board ...........................................................................2-3
3MAJOR COMPONENTS
3-1 Visual Diagram .......................................................................................3-1
3-2 About Main Units.....................................................................................3-2
3-3 Signal Tower...........................................................................................3-3
GENERAL DESCRIPTION
SAFETY PRECAUTIONS.................................5
CONTENTS
Page 3
CONTENTS
033C-E-OMA00-B03-01
4BASIC OPERATION
4-1 Operation Switch Panel ..........................................................................4-1
4-1-1 Diagram of Operation Panel ...................................................................4-1
4-1-2 Contents of Operation Switch .................................................................4-1
4-1-3 How to Set Production Counter (In the case of LC48)............................4-3
4-1-4 How to Set Production Counter (In the case of LC4H) ...........................4-4
OPERATION
5DAILY OPERATION
5-1 Starting of Automatic Operation..............................................................5-1
5-1-1 Preparation and Checking before Operation ..........................................5-1
5-1-2 Turn on the Machine and Start Automatic Operation .............................5-2
5-1-3 Put in or Take out Magazine...................................................................5-3
5-2 Production End and Interrupt Production................................................5-4
6CHANGING MACHINE SET UP
6-1 Process of Change .................................................................................6-1
Page 4
CONTENTS
033C-E-OMA00-B03-01
= MEMO =
Page 5
Be sure to observe
SAFETY PRECAUTIONS
033C-E-OMA00-B04-02
The precautions that must be observed in order to prevent injury to the user or another
person, or damage to property, are as follows.
The degree of danger or injury resulting from incorrect use due to failure to read an
indication is classified and described as follows.
The matters should be observed are classified and described according to the
symbols shown below.
(The following is only some examples of the symbolic indications.)
DANGER
WARNING
CAUTION
This indication refers to a situation which is
considered that there is imminent danger of death or
serious injury.
This indication refers to a situation which is
considered that there is a possibility of death or
serious injury.
This indication refers to a situation which is consid-
ered that there is a possibility of only injury or physical
damage.
These symbols indicate matters to which attention
must be paid.
This symbol indicates an action that must not be
carried out.
This symbol indicates an action that must be carried
out.
Page 6
Be sure to observe
SAFETY PRECAUTIONS
0 1 J Q B
g
feeder tables will have
serious injury.
WARNING
033C-E-OMA00-B04-01
Label part No.
M32E
Follow the warning indication.
This is a label for ensuring the safe machine use. If you do not observe it, there is a risk of
human injury or damage to property.
The following warning labels are pasted on this machine. Follow the instructions on each label. If a label
has come off, put a new one on a proper position. To order a label from the manufacturer, refer to
PARTS LIST.
Front view of warning label attached positions
0 1 N G B
WARNING
HIGH VOLTAGE
You will have serious
electric shock if you
touch electric power
supply inside.
0 1 J X A
DANGER
DO NOT TOUCH
ACTIVE PART
WHEN
OPERATING
You will have serious
injury if you touch the
active part.
0 1 P 6 A
WARNING
MAGAZINE LIFT
MOVING UP AND
DOWN
You will have serious
injury if you touch
moving magazine lift.
033C-PS006
Ce manuel convient aux modèles suivants
1
Table des matières
