Panasonic CF-VCW Series Schéma de câblage

Supplementary Instructions

This manual contains supplementary instructions regarding the use of the computer.

It explains the cases where the operation of the computer differs from that in the Operating Instructions.

This model is equipped with a CD-R/RW drive and Easy CD Creator™ 4/DirectCD™ 3 CD-ROM. Also featured is a slot for

accommodating a smart card: this feature makes it possible to use the security functions that, for instance, prohibit the unauthorized

use of the computer by anyone who does not have a smart card. (A smart card and software (application software, driver, addi-

tional Microsoft modules, etc.) need to be purchased separately for this.)

Using a smart card

Do not bend the card or force it into the slot.

Do not touch the contact area or press down on it forcefully. Otherwise, the card may no longer work properly.

For other details on how to handle the card, refer to the instructions that accompany the card.

When using a smart card, do not select [Refresh] in [Device Manager] of [Control Panel]-[System]. Doing so will make the

smart card unusable. If you should happen to select [Refresh], the smart card can be used again by entering standby or

hibernation mode and then resuming operation, or alternatively, by restarting the computer.

Contact

Smart Card

(Press the center part of the card

and insert it with the contact side

up.)

Installing the smart card

1Press the smart card eject button and confirm that the button is not sticking out.

2Align the smart card so that the location of the contact is as shown in the figure

on the right, and then insert the card all the way into the slot.

Smart Card

Eject Button

Removing the smart card

Press the smart card eject button, and pull out the card.

Remove the smart card only with the eject button. If you pull the smart card

without using the eject button, it may cause damage to the reader contact.

Confirm that [Smart Card] is set to [Auto] or [Enable] in [Advanced] menu of

Setup Utility.

CAUTION

NOTE

Using the CD-R/RW drive

Refer to the Reference Manual “Multimedia Pocket” included with your computer.

When writing to CD-R/RW discs

When using CD-R or CD-RW discs, read the descriptions on the disc packages.

CD-RW discs cannot be read with other drives*unable to accommodate CD-RW discs.

*Consult with the manufacturer of each drive.

Using the CD-ROM of the CD-R/RW writer software (included), install the application software on your computer.

For information on how to install the software page 3

Be sure to use discs conforming to the proper write speeds.

If the write operation is to involve a long period of time, be sure to connect the AC adaptor. If the battery power runs low and

the power of the computer is cut, the write operation may end in failure.

Depending on the disc, the quality of the write operation may not be so good. We recommend using any of the following discs.

Recommended Discs:

<CD-R>

TAIYOYUDEN Co., Ltd.

MITSUI CHEMICALS, Inc.

RICOH Co., Ltd.

MITSUBISHI CHEMICAL Co., Ltd.

HITACHI MAXELL, Ltd.

Description

DC 5V ± 5%

3600KB/s 24x speed (Max.)*1

300 KB/s 2x speed

600 KB/s 4x speed

1200KB/s 8x speed

300 KB/s 2x speed

600 KB/s 4x speed

1200KB/s 8x speed

CD-Audio, CD-ROM, CD-R, Photo CD, Video CD,

Enhanced Music CD, CD-RW, CD-TEXT

Supported

150 ms (24x Speed, 1/3 Stroke*2)

2MB

Conforms to enhanced IDE (ATAPI) standard

132 mm × 147.1 mm × 15.3 mm {5.2" × 5.8" × 0.6 "}

Approx. 345 g {0.76 lb.}

5°C to 35 °C {41 °F to 95 °F}/30 % RH to

80 % RH (no condensation)

*1If an unbalanced disc (e.g., a disc with which the balance has been displaced from the center) is inserted, the speed may become slower if

there are large vibrations while the disc is rotating.

*2Stroke: Indicates the amount of movement the lens (pickup) of the CD-R/RW Drive Pack must make in order to read data.

Item

Operating voltage range

CD-ROM read

CD-R write

CD-RW write

High-Speed CD-RW write

Supports

Buffer underrun error prevention function

Access Time

Cache memory

Interface

Dimensions (width × depth × height)

Weight

Operating temperature/Humidity range

Data transfer

rate

Specifications

<CD-RW/High Speed CD-RW>

RICOH Co., Ltd.

MITSUBISHI CHEMICAL Co., Ltd.

“Easy CD CreatorTM 4”(hereafter, Easy CD Creator) and “DirectCDTM 3”(hereafter, DirectCD) are CD writing software appli-

cations developed by Adaptec, Inc.

Here, explanations are given on general information about Easy CD Creator and DirectCD, the installation procedure, and how

to access the online manual. Refer to the online manual concerning the detailed use of the software applications.

Adaptec, the Adaptec logo, Easy CD Creator and DirectCD are trademarks of Adaptec, Inc. which may be registered in some jurisdictions.

Using Easy CD CreatorTM 4/DirectCDTM 3

For details on the differences between the functions of the software applications and CD media, refer to the online manual

of the applications as well.

General Information

What you can do with these software applications

Creation of music CDs

Creation of data CDs (CD-ROMs)

(You cannot write data directly from a word processing or other such application. To do this, use DirectCD.)

Creation of data CDs (writing files to CD-R and CD-RW discs like writing to floppy disks, etc.)

(You cannot create music CDs. To do this, use Easy CD Creator.)

Applicable CD Media

CD-R (CD-Recordable: one-time writable CD media)

Once data is written, it cannot be changed.

CD-RW (CD-ReWritable: rewritable CD media)

Written data can be deleted and new information can be added.

Close all other software application before running the Setup program for Easy CD Creator/DirectCD for added safety.

Depending on the computer, preparatory steps may be necessary before installation. Before installing the applications, be

sure to read the Operating Instructions or Reference Manual of the computer or CD-R/RW drive.

Installing Easy CD Creator/DirectCD

(First time only)

Easy CD Creator and DirectCD are not pre-installed in the computer. To install the software applications, follow the procedure

below.

If you accidentally delete Easy CD Creator and/or DirectCD, or if you use the product recovery CD-ROMs and completely

return the computer to factory condition, follow the procedure below to re-install the software applications.

1Set the Easy CD Creator CD-ROM in the CD-R/RW drive.

This screen will appear automatically.

In [Start] - [Run], input [x:\SETUP] and select [OK].

(“x” is the drive letter. You can change the letter to suit your preference.)

2Select your language in [Language], then select [Easy CD Creator] or [DirectCD].

Follow the on-screen instructions.

When the installation completes, remove the CD-ROM from the drive and then perform any of the following if necessary.

Right-click the “Create CD” icon on the desktop, select [Delete], then select [Yes].

Right-click the “Create CD” icon on the taskbar, select [Disable Create CD], then select [Yes].

< Eliminating the DirectCD Startup Banner>

Right-click the “DirectCD” icon on the taskbar and select [Properties].

Delete the check mark for [Display Adaptec DirectCD startup banner] and select [OK].

CAUTION

NOTE

With the above procedure, the online manual might not be displayed. In such cases, restart the computer, open Acrobat

Reader and then select the file below from [File] - [Open].

Easy CD Creator: “C:\Program Files\Adaptec\Easy CD Creator 4\ECD_STD.pdf”

DirectCD: “C:\Program Files\Adaptec\DirectCD\directcd.pdf”

How to access the Online Manual

To read the online manual, Acrobat®Reader must be installed.

Select [Start] - [Programs] - [Adaptec Easy CD Creator 4] - [Quick Reference Guide].

Select [Start] - [Programs] - [Adaptec DirectCD] - [Reference Guide].

Running Easy CD Creator/DirectCD

Refer to the online manual ( described above) for information on the operation and use of each function.

Cautions on Use

When the “CreateCD” icon is displayed on the taskbar, the [Auto Disconnect] screen of Dial Up may not be displayed

and the computer will continue to be connected when Internet Explorer is closed. In such cases, double-click the Dial Up

icon on the taskbar and disconnect the line.

When a new CD-R disc is inserted, the Easy CD Creator/DirectCD wizard is typically displayed. If there is no display, try setting

the CD-R disc again. If there is still no display, open Easy CD Creator and DirectCD separately from the start menu.

When reading the data of a CD-RW disc formatted with DirectCD on another computer, a screen to install the Adaptec

UDF Reader will be displayed. For the installation, Windows 95/Windows NT (as the OS) will be displayed on the screen,

but the application can also be installed on Windows 98 and Windows 2000.

Information

If Easy CD Creator or DirectCD does not operate properly, we recommend carefully reading the Quick Reference Guide and

online help file first for problems with the operating environment or operations.

If you still cannot troubleshoot the problem, contact Panasonic Technical Support.

About Copies

When writing to CD-R/RW, make sure that you are not infringing any copyrights.

It is illegal to copy audio CDs for non-personal use.

When backing up software, make sure that you are not infringing any software copyrights for that product.

Easy CD Creator and DirectCD are designed to assist you in reproducing material in which you own the copyright or have

obtained permission to copy from the copyright owner. Unless you own the copyright or have permission to copy from the

uncertain about your rights, contact your legal advisor.

NOTE

Autres manuels pour CF-VCW Series

Table des matières

Autres manuels Panasonic Lecteur CD/CDR

Panasonic

Panasonic CF-VCD252 Manuel utilisateur

Panasonic

Panasonic LK-MW602SK Manuel utilisateur

Panasonic

Panasonic LK-MC606BP Manuel utilisateur

Panasonic

Panasonic LF-1004AB Manuel utilisateur

Panasonic

Panasonic KX-LD721 Manuel utilisateur

Panasonic

Panasonic CW-7586-J Manuel utilisateur

Panasonic

Panasonic CW-7585-B Manuel utilisateur

Panasonic

Panasonic BRS1D Manuel utilisateur

Panasonic

Panasonic CF-VCW282U Manuel utilisateur

Panasonic

Panasonic CF-VCW281 Manuel utilisateur

Panasonic

Panasonic KX-LD721 Manuel utilisateur

Panasonic

Panasonic CF-VDR Series Manuel utilisateur

Panasonic

Panasonic KX-LRW10A Manuel utilisateur

Panasonic

Panasonic KX-L783A Manuel utilisateur

Panasonic

Panasonic KX-LD745 Manuel utilisateur

Panasonic

Panasonic CF-VCD281 Manuel utilisateur

Panasonic

Panasonic LF-1600A Manuel utilisateur

Panasonic

Panasonic KX-L810A Manuel utilisateur

Panasonic

Panasonic CF-VDR731 Manuel utilisateur

Panasonic

Panasonic LK-MC688BP Manuel utilisateur

Panasonic

Panasonic KX-LRW21A Manuel utilisateur

Panasonic

Panasonic KX-L840A Manuel utilisateur

Panasonic

Panasonic CR-594-B Manuel utilisateur

Panasonic

Panasonic CF-VCD711W Manuel utilisateur

Manuels Lecteur CD/CDR populaires d'autres marques

Philips

Philips CDD3610 Manuel utilisateur

QPS

QPS Que!Fire Manuel utilisateur

LG GCC-4241N Manuel utilisateur

Plextor

Plextor 12X-3 Mode d’emploi

Samsung

Samsung SN-324B Manuel utilisateur

Teac

Teac CD-211E Manuel utilisateur

SmartDisk

SmartDisk Firewire CD-R/W Manuel utilisateur

Axis

Axis CD-ROM SERVER Manuel utilisateur

LG CRD-8322B Manuel utilisateur

Memorex

Memorex 32023234 - 52x32x52x External USB2.0 CD... Instructions d'installation

Yamaha

Yamaha CD Recordable/Rewritable Drive CRW3200 Manuel utilisateur

Sony

Sony CRX230AE Manuel utilisateur

Sony

Sony CRX - 160E Manuel utilisateur

Pioneer

Pioneer BDR-S13U-X Manuel utilisateur

LG CRD-8320B Manuel utilisateur

Conner

Conner CFP2107 Series Manuel utilisateur

Sony

Sony CRX-1611 Manuel utilisateur

Plextor

Plextor 12-20C Mode d’emploi