Panasonic HDC-SD800P Manuel utilisateur

Pa.aso.ic _

Owner's Manual

High Definition Video Camera

_o_e,.o.HDC-SD800P

Before connecting, operating or adjusting this product, please read the instructions completely.

AVCHD _ I"17OOLBY LEICA _,M

o,_,T_I olcoMAR_--

STEREOCREATOR

H_ml V TM

VQT3K35

Advanced IPla,,F, ac L'_

Motion picture playback using operation icon

For details on the basic playback operations, refer to page 36.

Touch I_1_ during playback to fast

forward.

(Touch "<4 to rewind.)

During Playback • The fast forward/rewind speed

Fast forward/

rewind playback _ increases if you touch 1_1_/,_1 again.

(The display on the screen changes

_1_ from I_1_ to _.)

[] • Normal playback is restored when you

1_1| touch I_/!!.

Skip playback

(to the start of a

scene)

Slow-motion

playback

During Pause

4!I

[]

Slide the LCD screen display right to left

(left to right) while touching it during

playback.

With the playback paused, continue

touching ||_-.

(41|| is for slow rewind playback)

Playback is slow while touching.

• Normal playback is restored when you

touch I_/!|.

• When slow-motion pictures are played

back in reverse, they will be shown

continuously at approximately 2/3 rd the

speed of normal playback (intervals of

0.5 seconds).

• Slow-motion playback for iFrame

scenes will be in 1 second intervals.

Frame-by-frame

playback

The motion

picture is

advanced one

frame at a time.

With the playback paused, touch II)'.

(Touch(11to advance the frames one

at a time in the reverse direction.)

• Normal playback is restored when you

touch _/ll.

• When the frames are advanced one at a

time in the reverse direction, they will be

shown in intervals of 0.5 seconds.

• Frame-by-frame playback for iFrame

scenes will be in 1 second intervals.

VQT3K35

Direct playback During Playback

Touch the Direct playback bar or slide

it while touching.

• The playback pauses temporarily and

skips to the position touched or slid to

while touching.

• Playback will start by releasing your

touching or sliding finger.

• Direct playback bar cannot be operated

with the remote control.

Creating still picture from motion picture

A single frame from the recorded motion picture can be saved as a still picture.

Picture size of the still picture to be recorded is _ (1920x 1080).

1 Pause at the scene you want to save asastill picture during

playback.

• It is convenient to use slow-motion playback and frame-by-frame playback.

2Press the O button fully.

• Date the motion picture was recorded wifl be registered as date of the still picture.

• Quality will be different from the normal still picture.

VQT3K35

Highlight&Time frame index

An image of one scene is displayed as a thumbnail at set search condition. Scene can be

played back from any midway point of the scene you wish to see.

• Operate the zoom lever to O_ side and change over the

thumbnail display to Highlight&Time frame index. (-) 37)

1Touch

• To display the next (previous) page:

Slide the thumbnail display upward (downward) while

touching it.

Switch the Touch Menu, and then touch A (up)/V (down) on the

thumbnail scroll lever.

2Touch the desired search condition.

[3 SECONDS]I[6 SECONDS]/[12 SECONDS]I[MINUTES]I[FACE]*I[HIGHLIGHT]*

*it is not displayed an iFrame scenes.

• When select [FACE], it will select the portion for which face recognition was performed from the

scenes judged to be clearly recorded. This will then be displayed as a thumbnail.

• A portion judged to be clearly recorded will be detected and displayed in thumbnail if you

select [HIGHLIGHT].

3(When [MINUTES] is selected)

Touch _/_ to set the time.

• it can be set up to a maximum of 60 minutes.

• Touch [ENTER].

4Touch the thumbnail to be played back.

• Next (Previous) thumbnail can be displayed by touching _/[_.

Repeat playback

Playback of the first scene starts after playback of the last scene finishes.

: [VIDEO SETUP] _[REPEAT PLAY] _[ON] I

The O indication appears on the full screen views.

• All the scenes are played back repeatedly. (When playing back motion pictures by date, all

the scenes on the selected date are played back repeatedly.)

VQT3K35

Resuming the previous playback

If playback of a scene was stopped halfway, the playback can be resumed from where it was stopped.

{_ : [VIDEO SETUP] _[RESUME PLAY] _[ON] I

If playback of a motion picture is stopped, _ appears on the thumbnail view of the stopped scene.

•The memorized resume position is cleared if you turn off the unit or change the mode.

(The setting of [RESUME PLAY] does not change.)

Zooming in on a still picture during playback

(Playback zoom)

You can zoom in by touching a still picture during playback.

1Touch and hold the part you wish to zoom in on during still picture playback.

• The still picture is zoomed in the following order: × 1 _ ×2 _ ×4. Touch and hold the

screen to zoom in from the normal display to ×2, Touch the screen to zoom in from ×2 to

×4.

• The still picture is zoomed in on, centering on the part you touched.

2Move to the zoomed in position by touching _/

(_1[_1[_ or slide while touching the screen.

• The location of the zoom displays for about 1 second when

zooming in (zooming out) or moving the displayed location.

• The more picture is enlarged, the more its quality deteriorates.

Zooming out from the zoomed still picture @ Displayedlocation of

the zoom

Touch _ tozoom out. (×4_ ×2_ ×1)

• Touch _ to return to normal playback (× 1).

• You can also perform zoom operations using the zoom lever.

VQT3K35

Playing back motion pictures/still pictures by date

The scenes or the still pictures recorded on the same day can be played back in succession.

1Touch the date select icon. (-) 26)

2Touch the playback date.

The scenes or the still pictures recorded on the date

selected are displayed as thumbnails.

3Touch the scene or the still picture to be ODate select icon

played back.

• Playing back of all the scenes or the still pictures returns if the unit is turned off or the mode

is changed.

• Even if AVCHD scenes are recorded on the same day, they are grouped separately in the

following cases. -1, -2... is added after the recording date displayed on the screen.

When the number of scenes exceeds 99

When the Interval recording is used

• Even if AVCHD scenes or 1080/60p scenes are recorded on the same day, they are

grouped separately when switching between AVCHD and 1080/60p recordings. -1, -2... is

added after the recording date displayed on the screen.

• Even if iFrame scenes are recorded on the same day, they are grouped separately in the

following cases.

When the number of scenes exceeds 99

When [NUMBER RESET] is performed

• Even if still pictures are recorded on the same day, they are grouped separately in the

following cases.

When the number of still pictures exceeds 999

When pictures are recorded in Hi-Speed Burst Shooting mode ( _ is indicated after the

date in the list by date)

When [NUMBER RESET] is performed

• _ is displayed after the date in the list by date for the still pictures created from the motion

picture. (-_ 83)

VQT3K35

Highlight Playback

Part that was recognized as clearly recorded is extracted from a long recording, and it can be

played back in a short time with effects and music added.

•Highlight playback cannot be used for iFrame scenes.

1Touch _. (-) 26)

2(Only when you would like to change the settings)

Touch [SET] to select the item to change.

[PRIORITY SETUP]: Select the target to give priority to p!ay back. (-> 88)

[PLAYBACK TIME]: select the time t0 P!aY back

[MUSIC SELECT]: Select the music to be played on playback. (-'> 88)

3Touch [START].

• When the [SCENE SETUP] is not changed in step 2, it will playback with the last recorded

date.

4Select the playback operation. (-_ 36, 82)

• When the playback is finished or stopped, the screen to select [REPLAY],

[SELECTAGAIN] or [EXIT] is displayed. Touch the desired item.

• Playing back of all the scenes returns if the unit is turned off or the mode is changed.

• Slow-motion playback, frame-by-frame playback, and direct playback bar operation are not possible.

• Highlight playback cannot be performed with interval-recorded motion pictures. (-,) 62)

• Scene setting

1 Touch [SELECT SCENES] or [SELECT DATE].

2(When [SELECT SCENES] is selected)

Touch the scenes to be played back.

• Up to 99 scenes can be selected in succession.

• When touched, the scene is selected and *,/ is displayed.

Touch the scene again to cancel the operation.

(When [SELECT DATE] is selected)

Touch the date to be played back.

• A maximum of 7 days can be selected.

• When touched, the date is selected and surrounded by red.

Touch the date again to cancel the operation.

3 Touch [Enter]/[ENTER].

VQT3K35

• Priority setting

1 Touch [FACE] or [FACE RECOG.].

•If you touch [FACE], any detected face, including the face of person registered for Face

Recognition, is given priority on playback.

2 (When [FACE RECOG.] is selected)

Touch a face to specify.

• You can specify up to 6 faces, which are to be played back in priority.

• When touched, the registered face is selected and surrounded

by red. Touch the registered face again to cancel the

operation.

• Touch [ENTER]. When a single face is specified, the name registered for that face is

displayed. When multiple faces are specified, the number of faces is displayed.

•Playback time setting

Touch the playback time.

• The playback time of [AUTO] is a maximum of approx. 5 minutes.

• Playback time may become shorter than the setting, or it may

not even play back if the part recognized as clearly recorded is _j_,_

short.

•Effect setting

Effects such as fade, slow-motion, still (pause), or digest playback are inserted.

1 Touch the desired effect.

[POP]: Recommended for enjoyable

situations such as party scene.

[CLASSICAL]: Recommended for slow moving

scene.

[NATURAL]: Recommended for scenery.

[DYNAMIC]: Recommended for fast moving scene such as sports scene.

[NONE]: Effect is off.

•When the effect setting is changed, music setting will be set the same as the effect setting.

(To set the effect setting and music setting to different settings, change the music setting

after setting the effect setting.)

2 Touch [ENTER].

•Music setting

1 Touch your favorite music.

• When [EFFECT SETUP] is set to [NONE], you will be able to

select [NO MUSIC]. When [NO MUSIC] is selected, the audio

recorded at the time of shooting is played back.

• To adjust the volume of music during playback or audio

testing, operate the volume lever. (-) 37)

2 Touch [ENTER].

To test the music audio

Touch [START].

• Touch the other music option to change the music to be tested.

• When you touch [STOP], the music playback stops.

VQT3K35

Changing the playback settings and playing back the

slide show

1Touch _.(-3'26)

2(Only when you would like to change the settings)

Touch [SET] to select the item to change.

[DATE SETUP]: Select the date to be played back.

[EFFECT SETUP]: Select the effect for playback. (-) 88)

[SLIDE INTERVAL]: Selects the intervalbetween still pictures at playback.

[MUSIC SELECT]: Select the music to be played on playback.

3(When [DATE SETUP] is selected)

Touch the playback date.

(When [EFFECT SETUP] is selected)

Touch the desired effect.

• When the effect setting is changed, music setting will be set

the same as the effect setting. (To set the effect setting and

music setting to different settings, change the music setting

after setting the effect setting.)

• When [EFFECT SETUP] is set, [SLIDE INTERVAL] cannot be set.

(When [SLIDE INTERVAL] is selected)

Touch the interval of playback for the slide show.

[SHORT]: Approx, 1 second

[NORMAL]: Approx, 5 seconds

[LONG]: Approx. 15 seconds

VQT3K35

(When [MUSIC SELECT] is selected)

Touch the desired sound.

•To adjust the volume of music during playback of the slide

show or audio testing, operate the volume lever. (._ 37)

• Touch [ENTER].

(To test the music audio)

Touch [START] and start the audio testing.

• Touch the other music option to change the music to be tested.

• When you touch [STOP], the music playback stops.

4Touch [START].

5Select the playback operation. (-_ 36)

• When the playback is finished or stopped, the screen to select [REPLAY],

[SELECTAGAIN] or [EXIT] is displayed. Touch the desired item.

VQT3K35

Autres manuels pour HDC-SD800P

Table des matières

Autres manuels Panasonic caméscope

Panasonic

Panasonic Palmcorder PV-L51 Manuel utilisateur

Panasonic

Panasonic Viera HX-DC1 Manuel utilisateur

Panasonic

Panasonic Palmcoder PV-A228 Manuel utilisateur

Panasonic

Panasonic HX-DC1H Manuel utilisateur

Panasonic

Panasonic SDR-S26P Manuel utilisateur

Panasonic

Panasonic Palmcorder PV-GS200 Manuel utilisateur

Panasonic

Panasonic AG-AC30 Manuel utilisateur

Panasonic

Panasonic NV-GS400GC Manuel utilisateur

Panasonic

Panasonic HC-VXF990 Caractéristiques techniques

Panasonic

Panasonic HC-X1000PP Manuel utilisateur

Panasonic

Panasonic Hd camcorder Manuel utilisateur

Panasonic

Panasonic PV-D301 Manuel utilisateur

Panasonic

Panasonic AGHPX500P - MEMORY CARD CAMERA RECORDER Manuel utilisateur

Panasonic

Panasonic SV-AV10A Operating Manuel utilisateur

Panasonic

Panasonic NV-DS99EN Manuel utilisateur

Panasonic

Panasonic HDC-SDT750 Manuel utilisateur

Panasonic

Panasonic AJ-HVF20BE Manuel utilisateur

Panasonic

Panasonic Palmcorder PV-D427 Manuel utilisateur

Panasonic

Panasonic NV-GS25GN Manuel utilisateur

Panasonic

Panasonic HC-WXF1 Manuel utilisateur

Panasonic

Panasonic HDC-SD5BNDL Manuel utilisateur

Panasonic

Panasonic NV-GS75GN Manuel utilisateur

Panasonic

Panasonic Palmcorder PV-L781 Manuel utilisateur

Panasonic

Panasonic DVCPRO AJ-D615MC Manuel utilisateur

Manuels caméscope populaires d'autres marques

Toshiba

Toshiba CAMILEO Z100 Manuel utilisateur

Canon

Canon RC 260 Manuel utilisateur

Sony

Sony Handycam DCR-DVD7E Manuel utilisateur

Brinno

Brinno TimeLapse TLC200 Manuel utilisateur

JVC

JVC GR-SXM68AC Guide de démarrage rapide

Insignia

Insignia NS-DCC5HB09 - Camcorder - 720p Manuel utilisateur

MYDLINK

MYDLINK DCS-6100LH Manuel utilisateur

Sony

Sony video Hi8 Handycam CCD-TR555 Manuel utilisateur

SECURECOM

SECURECOM V-5014B Manuel utilisateur

Sharper Image

Sharper Image U-VIDEO Manuel utilisateur

JVC

JVC AA-V15EG Manuel utilisateur

Canon

Canon LEGRIA HV40 Manuel utilisateur

Sony

Sony Handycam DCR-VX2000 Manuel utilisateur

RCA

RCA CC616 Manuel utilisateur

ATIK Cameras

ATIK Cameras Horizon Manuel utilisateur

Sony

Sony Handycam HDR-CX580V Manuel utilisateur

Sharp

Sharp ViewcamZ VL-Z8H Manuel utilisateur

Philips

Philips M620/21 Manuel utilisateur