Pace TD-100 Manuel utilisateur

www.paceworldwide.com

Solutions and systems for soldering, rework and repair of electronics www.paceworldwide.com

Process Guide I-QFP-02

QFP Installation

Mini Wave

Equipment Required

PACE Intelliheat®Power Supply

TD-100 Thermo-Drive®Soldering Iron

Mini-Wave®Tip (See Chart on Back)

Tip Tool

HP-65 HandiPik®

Optional Equipment

Tweezer

Materials

Flux-cored Solder

Flux

Cleaner

Procedure

1. Set a tip temperature of 343°C (650°F) for lead-free

or 316°C (600°F) for leaded alloys and adjust as

necessary.

2. Install selected Mini-Wave®tip into the TD-100 using

Tip Tool.

3. Position the component ensuring proper lead-to-land

alignment. Hold the component in place using the

HandiPik®or tweezers.

4. Apply ﬂux and tack solder opposing corner leads.

5. Apply ﬂux to ALL lead/land areas.

6. Clean tip on Tip & Tool Stand sponge.

7. Apply solder to the cupped portion of tip to create a

convex bead of molten solder.

8. Position Mini-Wave®tip so the solder bead contacts

the top portion of leads. Slowly move tip over one row

of leads to form proper solder ﬁllets at each joint.

9. Repeat steps 6 through 8 on remaining sides of

component.

10. Re-tin Mini-Wave®tip with solder. Return TD-100 to

its Tip & Tool Stand.

11. Clean, if required, and inspect.

A

A

B

C

Position Component

C

Flux Leads

B

Tack Lead

D

Fill Tip

© 1997, 2001, 2012 PACE, Incorporated. Hand Soldering Manual for Rework/Repair & Assembly

(001) 910-693-8620 (USA) 877-882-7223

TD-100

D

E

E

Solder Component

Solutions and systems for soldering, rework and repair of electronics www.paceworldwide.com

Process Guide I-QFP-02

TD-100 Tips

© 1997, 2001, 2012 PACE, Incorporated. Hand Soldering Manual for Rework/Repair & Assembly

(001) 910-693-8620 (USA) 877-882-7223

Tips Description Tip Size - L Size - D Part Number

MiniWave®N/A 3.05mm (.120") 1124-0032-P1

Angled MiniWave®N/A 3.05mm (.120") 1124-0033-P1

Single Sided Chisel N/A 3.05mm (.120") 1124-0034-P1

Angled MiniWave®N/A 2.11mm (.083") 1124-0035-P1

Single Sided Chisel, Fine Pitch N/A 1.5mm (.06") 1124-0038-P1

Angled MiniWave®, Fine Pitch N/A 1.6mm (.064") 1124-0039-P1

MicroFine Single Sided Chisel N/A 0.9mm (.035") 1124-0040-P1

MicroFine Single Sided Chisel N/A 1.1mm (.045") 1124-0041-P1

Angled Micro-Wave N/A 1.1mm (.045") 1124-0045-P1

Micro-Wave N/A 1.1mm (.045") 1124-0046-P1

Single Sided Chisel 17.00mm (0.693") 4.55mm (0.178") 1124-0048-P1

MiniWave®N/A 2.79mm (0.110") 1124-0049-P1

Autres manuels pour TD-100

3

Autres manuels Pace pistolet à souder

Manuels pistolet à souder populaires d'autres marques

Bakon

Bakon 3200 Manuel utilisateur

Proxxon

Proxxon Gaslotset MGS Manuel utilisateur

jbc

jbc SFR-A Manuel utilisateur

jbc

jbc CL8010 Manuel utilisateur

HAKO

HAKO FX-8804 Manuel utilisateur

SATA

SATA 02002A Manuel utilisateur

Velleman

Velleman HRJA151 Manuel utilisateur

Weller

Weller WSM 1 Manuel utilisateur

Vishay Precision Group

Vishay Precision Group Micro-Measurements Mark V Instructions de montage

ersa

ersa i-CON 1V Manuel utilisateur

Hakko Electronics

Hakko Electronics FX-100 Manuel utilisateur

Weller

Weller WAD 101 Manuel utilisateur

Weller

Weller WXD 2 Manuel utilisateur

AlienTek

AlienTek T100 Manuel utilisateur

Atten

Atten ATETOOL AT-689A Manuel utilisateur

Surtek

Surtek 112554 Dimensions et guide d'installation

Parkside

Parkside PLBS 30 A1 Manuel utilisateur

BlackJack SolderWerks

BlackJack SolderWerks BK8000 Manuel utilisateur