PAB MP1 Standard Manuel utilisateur
Helmet for wildland re ghting
and technical rescue
CERTIFICATES: EN 16471 | EN 16473 | EN 166
· user manual ·
PAB MP1 Standard
firefighting series
When conditions are at their worst,
we are at our best.
3
INDEX
EXPLODED VIEW 5
SAFETY NOTICE 6
TECHNICAL DATA 9
CERTIFICATIONS AND TECHNICAL SPECIFICATIONS 10
UNPACKING 12
ADJUSTING THE HELMET 12
REMOVE THE HELMET 17
ADJUSTING THE INTEGRATED INTERNAL GOGGLES
AND FACE SHIELD * 18
ATTACHING THE SAFETY GOGGLES* 20
ATTACHING THE NECK PROTECTORS (*Optional) 21
MOUNTING THE LAMP HOLDERS AND LAMPS (*Optional) 22
MAINTENANCE AND CLEANING 24
FACE SHIELD REPLACEMENT 28
TRANSPORT 29
DISCARD 29
We thank you for selecting a PAB Akrapovic product.
PAB Helmet MP1 Standard version meets safety
requirements and conforms to EN 16471:2014,
EN 16473:2014 and EN166:2004 European standards.
It has been designed to protect the head under
the most extreme conditions. It has an optimal
relationship between protection and comfort with a
broad spectrum of optional upgrades.
It is a multi-purpose helmet, offering high standard of
protection and comfort with accessories that further
widen the possibility of customisation. Designed
for outland and wildland reghting, rescue service
activities, EMS activities and industrial protection.
1
MP1 SHELL
2
IMPACT LINER
3
INTERIOR BASKET
4
ADJUSTABLE NECK PIECE with REGULATOR
5
HEADBAND PAD
6
HEAD PAD
7
CHINSTRAP
8
REFLECTIVE STICKERS
9
LAMP *
10
LAMP HOLDERS *
11
FACE SHIELD/VISOR *
12
INTERNAL GOGGLES
13
NECK PROTECTOR *
*Optional Accessory
www.pab.hr
PAB Fire Compact
5
8
13*
1
3
2
12
4
9
6
5
10*
OVERVIEW
7
EXPLODED VIEW
Picture 1
11
www.pab.hr
Important!
PAB MP1 Standard is a safety helmet for the head intended for wildland reghting
and for technical rescue interventions.
Read the instructions carefully before wearing the helmet.
PAB accepts no liability, if the product has been used inappropriately or if it is not
used as intended. Product liability claims and warranties made by PAB for the product
are voided, if the product is not used, serviced or maintained properly.
Before wearing the helmet you should perform a detailed inspection of the helmet
and check if all its components are in their place and properly xed.
An unusual event may require to replace a product after only one use. This depends
on the type and intensity of use, or the environment in which it is used: aggressive
environments, extreme temperatures, contact with chemicals, strong impacts...
SAFETY NOTICE
PAB MP1 Standard
7
OVERVIEW
Warning:
Inappropriate use, maintenance or servicing can affect the function of the helmet
and can seriously endanger the user’s life. The helmet’s operability must be checked
and veried before each use. The helmet is not to be used if the operability test is
unsuccessful, if the helmet is damaged, if proper servicing or maintenance has not
been made, or if PAB original spare parts have not been used.
When tted with another item of personal protective equipment or with an accessory
(other than as supplied by the helmet manufacturer for use with this helmet) a
helmet marked as complying with EN 16471:2014 and EN 16473:2014 might no
longer satisfy all clauses of these standards. Refer to information provided by the
helmet manufacturer.
The helmet provides protection of the head against shock, sharp objects, splatters
of corrosive chemicals (Sul-phuric acid, Sodium hydroxide, p-Xylene, Butan-1-
ol, n-Heptane), molten metals, radiating heat, ames, electric current. The user’s
protection is not guaranteed in situations where the conditions exceed those
described in the specications above.
The helmet absorbs the energy of a blow by partial destruction of, or damage to,
the helmet. Even though such damage may not be readily apparent, any helmet
subjected to severe impact should be replaced.
Replace any damaged parts only with original PAB parts, as only these original parts
are authorised and ensure the performance of the helmet.
Warning:
The protection intended to be provided by the helmet can only be ensured when it
is properly assembled and correctly tted. Any removable parts shall not be worn
separately.
This helmet complies with the retention requirements of EN 16471:2014 and
EN 16473:2014 European stand-ards when the chin strap supplied by the helmet
manufacturer is worn and adjusted in accordance with these instructions.
www.pab.hr
1
4
6
6
3
3
1
SHELL MP1
2
CHINSTRAP
3
REFLECTIVE STICKERS
4
ADJUSTABLE NECK PIECE
WITH REGULATOR
5
INTERIOR BASKET
6
INTERNAL GOGGLES
7
NECK PROTECTOR *
8
TEXTILE BAG FOR STORING
AND TRANSPORT
*Optional acessory
Picture 2
Picture 3
Picture 4
PAB MP1 Standard
9
HANDLING INSTRUCTIONS
TECHNICAL DATA
Helmet sizes For head sizes from 52 cm to 64 cm (20.5 inches to 25.2 inches)
Weight
(helmet with integrated
internal goggles and no
optional accessories)
850 g ± 30 g
The weight may vary depending on the colour (e.g. photolumines-
cent colour).
When optional accessories are tted to the helmet the weight
changes.
Optional accessories • Face shield
• Neck protectors: standard versions
(leather, aluminised bre, Nomex or meta-aramid)
• Lamp holders
• Lamps
Warranty
• Helmet
• Optional accessories
2 years
2 years (this only applies to accessories produced by PAB Akrapovic)
The length of the useable life of this helmet will be affected by the types of
materials used in its construction and the environments in which the helmet
is used and stored. Recommendations on this topic should be sought from the
manufacturer.
1
SHELL MP1
2
CHINSTRAP
3
REFLECTIVE STICKERS
www.pab.hr
The helmet meets the requirements of Directive 89/686/CEE and is certied
according to EN 16471:2014 and EN 16473:2014 standards.
Helmet – Standards, Directives
Certication
agency
CSI S.p.A, Viale Lombardia 20, 20021 Bollate (MI), Italy,
Notied Body No.: 0497
Directives and
Standards
89/686/EEC “Personal Protection Equipment”
EN 16471:2014 “Fireghters helmets – Helmets for wildland re ghting “
EN 16473:2014 “Fireghters helmets – Helmets for technical rescue”
Integrated internal goggles
Certication
agency
CSI S.p.A (0497), Viale Lombardia 20, 20021 Bollate (MI), Italy,
Notied Body No.: 0497
Directives and
Standards
89/686/EEC “Personal Protection Equipment”
EN 166:2004 “Personal eye protection”
EN 14458:2004 “Personal eye-equipment – Face shields and visors for
use with reghters’ and high performance industrial
safety helmets used by reghters, ambulance and
emergency services “
CERTIFICATIONS AND TECHNICAL SPECIFICATIONS
PAB MP1 Standard
Table des matières
Autres manuels PAB Accessoires pour motos
Manuels Accessoires pour motos populaires d'autres marques
SRC
SRC B-TRK502-01-01-SL Manuel utilisateur
3M
3M Speedglas 9100 MP Manuel utilisateur
hepco & becker
hepco & becker 6307520 00 01 Manuel utilisateur
HOMCOM
HOMCOM AA0-077 Manuel utilisateur
hepco & becker
hepco & becker 6307558 00 01 Manuel utilisateur
Wunderkind Custom
Wunderkind Custom 106503-F15 Guide de l'utilisateur
