OZtrail CAM-H016-F Manuel utilisateur
OWNERS MANUAL
www.oztrail.com.au
Covert 16MP
CAM-H016-F
2
CONTENTS PAGE
Contents Page
2
Introduction
3
Important Safety Precautions
3
Product Specification
6
Contents
7
Getting to know your Camera
8
Getting Started
10
Camera Operation
15
AV Output
28
Connection to a Computer
29
Troubleshooting
31
Warranty
33
3
INTRODUCTION
Congratulations on the purchase of your new camera.
This manual contains important safety and operating
information. Please read all the information carefully before
you use the device to avoid accidents and keep it for future
reference. Follow these important safety and operation
instructions.
IMPORTANT SAFETY INSTRUCTIONS
•This Product is rated IP54, please ensure it is use within
this environment
•Press the buttons gently. Pressing too hard can damage
the product.
•Do not subject the camera to heat source or impact to
avoid damage.
•Do not attempt to dismantle or repair this camera
4
yourself. Qualified personnel should perform repairs.
•Disconnect or remove all power source from the camera
before cleaning.
•This product is not intended for commercial use.
Household/personal use only.
•To prevent software failure, never disconnect the product
from a PC while file transferring is in progress
•Keep your camera clean (use a dry soft cloth to clean. Do
not use alcohol, thinners or benzene to clean the surface
of the product).
•Do not kink USB and video cable and do not install it over
sharp edges.
•Keep batteries away from children and pets.
•Insert the batteries observing the proper polarity (+/-).
Failure to properly align the battery polarity can cause
Injury and/or property damage.
5
•Remove old or discharged batteries from the product.
•Remove the batteries when the product will not be used
for extended periods of time to prevent damage due to
rusted or corroded batteries.
•Never throw batteries into a fire, do not expose batteries
to fire or other heat sources.
•Battery Disposal: Old or discharged batteries must be
properly disposed of.
•Keep children away from batteries. If you suspect a
battery has been swallowed, seek immediate medical
assistance.
Attention: We have done our best to produce a complete and
accurate manual. However, we cannot ensure that there are no
errors or omissions during the printing process.
6
PRODUCT SPECIFICATION
•Video Resolution: 720P (1280 x 720 @ 30fps), 1080P
(1920 x 1080 @ 20fps)
•Still Image: 3MP, 5MP, 8MP, 12MP, 16MP
•2.4” Preview Screen
•IP54
•Triggering Distance: 20m
•Triggering Speed: 0.6secs
•Up to 7 images per trigger
•46 IR Low Glow LED (850nm)
•Powered by 8 x AA batteries
•Expandable Micro SD Slot up to 32GB
•Works with Windows XP, Vista, 7, 8, 10, OSX 10.2 and
above
NOTE: As a result of continual improvements, the design and specifications of the
product within may differ slightly from the unit illustrated on the packaging.
7
CONTENTS
Please make sure that the items shown below are included in
the package. Should an item be missing, please contact the
local retailer from which you purchased this product
1. Trail Camera 1 piece
2. Mounting Bracket and Accessories 1 piece
3. Mounting Strap 1 piece
4. USB Cable 1 piece
5. AV Cable 1 piece
6. User Manual 1 piece
8
GETTING TO KNOW YOUR CAMERA
DEVICE OVERVIEW
15
9
1
Up/Video
2
Right
3
Shot
4
OK
5
Left
6
Menu
7
Replay
8
Down/Capture
9
Micro SD Slot
10
AV Output
11
USB Output
12
OFF (Mode Switch)
13
Test (Mode Switch)
14
ON (Mode Switch)
10
15
Preview Screen
16
IR LED
17
Lens
18
Motion Sensor
19
Side Motion Sensors
GETTING STARTED
POWER SUPPLY
Please install batteries before using the camera.
Open the camera case and remove the battery cover. Install 8
pieces of 1.5V AA batteries. Please make sure they are inserted
as per the (+ and -) symbols.
Table des matières
Autres manuels OZtrail Caméra de repérage
