Oypla 3756 Manuel utilisateur
Turbo 2kw Convector Heater
User Manual
USER MANUAL Model No: 3756
•This product is not a toy and should only be used for its designated purpose.
•Make sure no objects are close. The user takes all responsibility for the construction
and placement of the product.
•Make sure the Turbo 2kw Convector Heater is out of the immediate reach of children
to avoid potential hazards and injuries.
•Never leave the radiator unattended.
•Once you are finished with the radiator be sure to turn it off, leaving it on can be
dangerous. Allow to cool before moving/storing.
•To protect against electrical shock, do not immerse cord, plug or any part of this
appliance in water or any other liquid.
•Ensure the power supply to the socket into which the appliance is plugged, is in
accordance with the rating label on the appliance and that the socket is earthed.
•This product is not a toy, and is only to be used for its designated purpose.
•Do not carry out alterations or modifications to this product.
•This product is intended for indoor use only.
•This product is only suitable for well insulated places or occasional use.
•Clean only with a damp cloth. Do not use strong industrial cleaning substances or
abrasive materials. Never clean while hot or in use. Make sure that the product has
been turned off, cooled down and unplugged from the wall before doing so.
•Do not set the timer to long cycles unless you will be near the Turbo 2kw Convector
Heater for an extended amount of time. This is to avoid potential fires.
•If the product is damaged or has any defects, please contact cs[email protected]
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold on
this condition, which no representative of the company can waive or change.
USER MANUAL Model No: 3756
USER MANUAL Model No: 3756
Operating Instructions
Parts List:
Please be aware that you will be referring to this parts list throughout the assembly process.
•Red all the instructions thoroughly before using the Turbo 2kw Convector
Heater
•Never allow children to operate, play with, or be in the immediate area of the
Turbo 2kw Convector Heater.
•Make sure that you turn the Turbo 2kw Convector Heater off, unless you are
using the timed mode. This is for your own safety and the safety of
possessions.
To reduce the risk of fire, electrical shock or
injury when using the Turbo 2kw Convector
Heater, follow these basic precautions.
USER MANUAL Model No: 3756
1. Hold the turbo convector heater upside down,
removing the two screws that correlate with the holes
on the base stand. After this, make sure to align the holes
in the base stand with the holes on the bottom of the
turbo convector heater.
USER MANUAL Model No: 3756
2. Screw both of the small screws you just removed into any of the aligned holes (as pictured to the above
left), this will allow for the base stand to be held in place against the turbo convector heater. Secure the
base stand by screwing a small screw into the remaining aligned hole. Please see the image to the top
right.
3. Once completed, the bottom
of the convector heater should
look similar to the image on the
right.
Free Standing Installation
Imported into the EU by Oypla.com LLP, Uxbridge, UB8 2FX
Environmental Protection
Products bearing the symbol shown above means that used electrical and electronic equipment (WEEE) should not be mixed with general
household waste. For proper treatment, recovery and recycling, please take this product(s) to designated collection points where it will be
accepted free of charge. Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on
human health and the environment, which could otherwise arise from inappropriate waste handling. Please contact your local authority for
further details of your nearest designated collection point. Penalties may be applicable for incorrect disposal of this waste, in accordance with
your national legislation.
USER MANUAL Model No: 3756
Operating your Convector Thermostat
Choose a suitable location for the heater, taking into
account the safety recommendations found in the
“Safety Instructions”.
Insert the plug into a suitable socket.
Turn the thermostat knob counter clockwise to the
maximum setting.
Turn on the heating element, which is found on above
the thermostat knob. To adjust the heating, turn the
switch to I (750W) for low heating. Turn the switch to II
(1250W) for medium heating. Turn the switch to III
(2000W) for high heating.
When you are comfortable with the temperature in the
room, slowly turn the thermostat anti-clockwise until you
hear a click. The thermostat will now ensure that the
room is kept at this temperature by automatically cycling
itself on and off.
Operating your Convector Timer
Turn the timer clockwise onto the current time, making
sure to align the time with the arrow.
Push the red points up, this creates an “ON” time.
Once the heater has reached the time, the heater will run
until the time is over. You can increase the time using the
red points if needed.
Operating your Convector Heater Fan
The convector heater incorporates an internal fan. The
internal fan can be switched on independent of the
heating elements.
The fan is operated by means of a fan switch, which only
works with the thermostat in the “ON” position.
In warm conditions, the heating elements are “ON” and
the fan is able to blow warm air into the room.
In cold conditions, the heating elements are “OFF” and
the fan is able to blow warm air into the room.
Cleaning the Heater
Always turn the heater off and un-plug the heater from
the wall socket, giving it time to cool down before
cleaning.
Clean the outside of the heater by wiping with a damp
cloth and buff with a dry cloth. As mentioned in the
“Safety Instructions”, do not use industrial cleaning
substances or abrasive materials. Do not allow any water
to enter the heater. Do not attempt to clean the plug.
Storing the Convector Heater
When storing the convector heater, make sure that the
area is clean and dry. Ensure that the heater is handled
with care to prevent potential damage.
Please retain a copy of all instructions for future consultation.
Table des matières
Manuels Chauffage populaires d'autres marques
oventrop
oventrop Regucor Series Manuel utilisateur
Blaze King
Blaze King CLARITY CL2118.IPI.1 Manuel utilisateur
ELMEKO
ELMEKO ML 150 Manuel utilisateur
BN Thermic
BN Thermic 830T Manuel utilisateur
KING
KING K Series Mode d’emploi
Empire Comfort Systems
Empire Comfort Systems RH-50-5 Guide de démarrage rapide
Empire Heating Systems
Empire Heating Systems WCC65 Manuel utilisateur
Wetekom
Wetekom 92 86 43 Manuel utilisateur
Desa
Desa SPC170-F Manuel utilisateur
Watlow
Watlow Watrod Electric Tubular Heaters Manuel utilisateur
Haverland
Haverland ECO-DRY GPS Series Manuel de la liste des pièces
Stelpro
Stelpro ASILVC2060 Series Manuel utilisateur