Oxdale se400 Mode d'emploi
1
OXDALE PRODUCT LTD
OPERATING AND MAINTENANCE MANUAL
SE400 LOG SPLITTER
KEEP FOR FUTURE USE
2
CONTENTS
Safety
3
Labels
6
Quick Guide
7
In Depth Instructions
9
Warranty Information
16
Technical Specifications
17
Declaration of Conformity
18
Contact Details
19
Other Information
Manufacturer
Oxdale Products
Unit 20 –21 Foxwood Road
Off Sheepbridge Lane
Chesterfield S41 9RF
Year of Construction
2019
Machinery Type
SE400
Mass of Machine
Serial Number
Max. Hydraulic Oil
Operating Pressure
3
SAFETY
OXDALE PRODUCRS REQUIRES THAT ANYONE OPERATING OR
MAINTAINING THE LOG SPLITTER SHALL READ AND UNDERSTAND
ALL SAFETY, OPERATION AND MAINTENANCE DATA CONTAINED IN
THIS USER MANUAL BEFORE USING THE LOG SPLITTER.
The log splitter is powered by a Honda Engine. A copy of the
Honda owner’s manual should accompany this instruction
manual. Please contact us if this is missing. Hydraulic action
provides the force to drive a splitting wedge into a log. Never
operate the logsplitter persons are in the area, especially small
children. Hazards associated with log splitting may be pinch
points, splinters, eye injury and entanglement.
IT IS FOR SINGLE PERSON USE ONLY.
YOU ARE RESPONSIBLE FOR THE SAFE OPERATION AND
MAINTENANCE OF THE LOG SPLITTER. THE MOST IMPORTANT
SAFETY DEVICE ON THE EQUIPMENT IS THE SAFE OPERATOR.
•Keep two hands on the operating leavers at all time,
never put hands or fingers between the wedge and the
log to be split or near moving parts. Always stop the
machine before cleaning it or making adjustments.
•The operator should wear suitable PPE including eye
protection, gloves and safety boots. Close fitting
clothing should be worn to reduce the risk of
entanglement.
•Never stand either side of the log splitter whilst
operating. Logs can sometimes split apart violently e.g.
due to knots. Stand in front of the machine to minimise
risk from falling debris.
4
•Never hold the top of the log whilst setting in place or
splitting.
•Never split two logs on top of each other.
•The log splitter is very powerful but some hard or wet
wood can be difficult to split. Do not force the wedge as
this could cause injury to yourself and cause damage to
the log splitter.
•Never operate the splitter when children or animals are
in the danger zones or let children operate the splitter.
•Do not leave machinery unattended whist it is running.
•Both ends of each log should be cut as square as possible
to help prevent the log from riding out of the splitter.
This is also aided by the three holes in the log platform
having raised edges to reduce the risk of slipping.
•Always choose a working area free from obstructions
and then keep the working area free from obstructions
such as logs and split wood.
•Machine is for single person operation only using both
hands on the operating lever.
•Operate splitter on solid ground level.
•The log splitter is designed only for splitting wood. Using
it for any other purpose may damage it and be
dangerous to the user and others.
•Ensure that the machine is stable and secure at all times
when in use and is stored safely when not in use in a dry
place.
•Ensure that the accompanying Honda engine manual
and its safety decals are referred to.
5
LABELS
The SE400 log splitter should have the following labels
attached. If any safety decals are missing or illegible, they
should be replaced immediately.
SAFETY LABELS
“Danger! Keep clear of moving parts!”
Always keep hands and any loose clothing out of
the way of moving parts, especially the splitting
wedge.
“Wear eye protection!”
Splitting logs carries the risk of flying debris,
always wear eye protection.
“wear gloves!”
Log splitting can involve contact with sharp
objects, suitable gloves should always be worn.
“Wear appropriate footwear!”
Steel toecap boots should always be worn due to
potential for heavy objects to fall off the splitter
“Wear hearing protection!”
Operators are required to wear hearing protection
conforming to current standards.
6
OPERATORS QUICK GUIDE
It is important for the safety of the operator and the
machine to follow these instructions
PLEASE REFER TO IN DEPTH INSTRUCTONS BEFORE FIRST USE
Pre-Operation Checklist
•Grease the slider every 10 hours of operation and
pre/post season.
•Check that all hydraulic fittings and connections are
tight and in good condition.
•Check for damaged, worn, missing parts and replace if
necessary.
•Replace missing or illegible safety decals.
•Inspect the log holding device for damage
Operating Checklist
•Position the log splitter on solid level ground when
operating.
•Start the engine and adjust the throttle to suit the
work being done (check the engine manual for
details.)
•Position the log on the operating table so it is lined up
with the centre of the wedge
•Secure the log firmly using the log holding device
•Using both hands lift the safety leavers to lower the
wedge to split the log. The speed can be controlled by
how much pressure you put on the control valve.
•Using both hands, lower the operating leavers to lift
the ram back to the desired height
7
•Stop splitting if the log starts to move and reposition
as per the above instructions.
•Should the wedge lock or become stuck in the log,
return the wedge to the fully open position and gently
rock the log free before continuing.
Post Operating Checks and Maintenance Instructions
•Wipe off your log splitter with a damp cloth
periodically to keep it free of debris.
•It is recommended that you store your splitter in a dry
place when not in use.
•The splitting wedge may need to be sharpened
periodically, just using a file.
•Inspect the log holding device for damage.
Storage and Transportation
•The SE400 should be stored in an upright, vertical
position.
•Should be stored in a dry location.
•Should be stored in a safe location where the machine
will not get knocked over.
•The SE400 should be transported in a vertical position
and should be strapped securely.
8
IN DEPTH INSTRUCTIONS
Before First Use
FILL THE ENGINE WITH ENGINE OIL AND PETROL
The engine will contain oil however the level should be tested
before use.
Before the engine can be started for the first time it needs to
be filled with petrol. Please refer to the Honda engine manual
for details on how to fill the engine with oil and petrol.
PETROL FILLER CAP
OIL FILLER CAP
Filling the Tank with Hydraulic Oil
The hydraulic oil tank holds approximately 14 litres of
hydraulic oil. We recommend using ISO 46 type oil. The tank is
filled through the filler cap on top of the unit.
Pour the oil in until you have filled the tank as indicated on the
level gauge.
9
Please note that once the unit has been run for the first time
and the pump filter and pipe work filled, you will need to top
up the tank.
FILLER CAP
LEVEL GAUGE
GREASING
The ram collar needs to be greased
where it slides down the guide; this
will help reduce the friction and
help the unit run more smoothly.
This needs to be carried out every
10 hours or alternativly at the start
of each day.
Ram Collar
10
Operating Instructions
These instructions are designed for the safety of the
operator and the machine
The log splitter is designed for splitting logs only AND IS FOR
SINGLE PERSON USE. It can handle logs no bigger than 450mm
and having a diameter no bigger than 900mm and no smaller
that 75mm in diameter.
Only persons who are competent to do so and having read this
manual, in full, should use the log splitter.
Before using the log splitter for the first time each day a visual
inspection should be carried out as explained in the operators
guide.
When operating the unit, it should be positioned on solid and
as far as possible, level ground. Wheel blocks should be used
to prevent movement of the machine. Both hands should be
kept on the leavers when the ram is being extended and
retracted. Lifting the handle will extend the ram and lowering
the handle will retract the ram.
Autres manuels pour se400
1
Table des matières
Autres manuels Oxdale fendeuse de bûches
Manuels fendeuse de bûches populaires d'autres marques
Scheppach
Scheppach OX 3-1000 Instructions de montage
Swisher
Swisher 21200 Manuel utilisateur
Elem Garden Technic
Elem Garden Technic FBHT65-22TCH Manuel utilisateur
Champion Power Equipment
Champion Power Equipment 90720 Manuel
Boss Industrial
Boss Industrial ES5T20 Manuel utilisateur
Villager
Villager LSP 12 T Manuel utilisateur
