Oversteel Krypto Manuel utilisateur
KRYPTO
GAMING MONITOR SERIES
24 FULL HD RESOLUTION
1920×1080@165Hz
USER MANUAL
MANUAL DE USUARIO
MANUEL DE L'UTILISATEUR
BENUTZERHANDBUCH
MANUALE UTENTE
04
16
28
40
52
EN
ES
FR
DE
IT
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States
and other countries.
Los términos HDMI y HDMI High-Definition Multimedia Interface, y el logo de HDMI son
Marcas comerciales o marcas registradas de HDMI Licensing Administrator, Inc. en los Estados
Unidos Estados y otros países.
Les termes HDMI et HDMI High-Definition Multimedia Interface, ainsi que le logo HDMI sont
Marques commerciales ou marques déposées de HDMI Licensing Administrator, Inc. aux États-
Unis États et autres pays.
Die Begriffe HDMI und HDMI High-Definition Multimedia Interface sowie das HDMI-Logo
lauten Marken oder eingetragene Marken von HDMI Licensing Administrator, Inc. in den
Vereinigten Staaten Staaten und andere Länder.
I termini HDMI e HDMI High-Definition Multimedia Interface e il logo HDMI sono Marchi o
marchi registrati di HDMI Licensing Administrator, Inc. negli Stati Uniti Stati e altri paesi.
EN
ES
FR
DE
IT
KRYPTO
GAMING MONITOR SERIES
24 FULL HD RESOLUTION
1920 ×1080@165Hz
4
KRYPTO
GAMING MONITOR SERIES
EN Important Safety Precautions
1. Please read all the instructions carefully before using this product.
2. BE SURE TO unplug the power cord when cleaning LCD. Never clean it with liquid detergent or spraying detergent, but wipe it with
wet soft cloth. If it is still not clean, please use special detergent for LCD.
3. DO NOT use accessories not authorized by the manufacturer, other wise they may incur danger.
4. When disconnecting the power cord of display or power adapter, always remember to hold the plug instead of puling the wire to
unplug the power cord.
5. Keep the display away from water sources such as bath tub, washbasin, sink or washing machine.DO NOT place the display on wet
floor or near a swimming pool, or press LCD surface with fingers or hard objects.
6. The grooves and openings on the back and bottom of the shell are for ventilation purpose and also for guaranteeing the reliability
of the elements and preventing them from overheating; in order to prevent the vents from blocking; DO NOT place the display on
bed, sofa, carpet or other similar surfaces; DO NOT place the display near to or on heat radiator or heater; DO NOT put the display
into embedded device, unless it is provided with adequate ventilating equipment.
7. Only the type of power source indicated on the nameplate applies to this display. If you have any questions on the type of power
source you use, please consult the dealer of the display or local administration of power supply.
8. For safety, the display or the power adapter is equipped with three-pin plug power cord. The third pin of this plug is for grounding,
and only applicable to socket that is correctly grounded. In case that your socket is not available for the plug, please contact
electrician to replace the socket.
9. Since there is high voltage or other risks when the shell is opened or moved, please DO NOT repair the display by yourself, but
request qualified maintenance staff to carry out.
10. In one of the following cases, please unplug the display or the power adapter and ask qualified maintenance staff for help:
a. The power cord or the plug is impaired or worn.
b. The display falls off or the shell is damaged.
c. The display is obviously abnormal.
11. Please place the display in a cool, dry and well ventilated place.
12. Store the display in temperature range of -10°C~60°C, beyond which the display may be damaged permanently.
The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to
your home, consult your dealer or local power company.
The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power
outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an
adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded plug.
Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will protect the monitor from damage due to
power surges.
Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate configured receptacles marked
between 100-240V AC, Min. 5A.
The wall socket shall be installed near the equipment and shall be easily accessible.
Power & Electrical Warnings
5
KRYPTO
GAMING MONITOR SERIES
EN
Read the safety instructions carefully and thoroughly.
All cautions and warnings on the device or user’s manual should be noted.
Refer servicing to qualified personnel only.
Keep the User’s Guide that comes with the package for future reference.
To prevent fire or shock hazard, keep this device away
from humidity and high temperature.
The ventilator on the device is used for air convection and to prevent the device
from overheating. Do not cover the ventilator.
Lay this device on a reliable flat surface before setting it
up.
Do not leave the device in an unconditioned environment with a storage
temperature above 60OC or below -20OC, which may damage the device.
NOTE: The maximum operating temperature is around 40OC.
Always keep strong magnetic or electrical objects away from the device.
Make sure that the power voltage is within its safety range and has been adjusted properly to the value of 100~240V before connecting the
device to the power outlet. Do not disable the protective earth pin from the plug. The device must be connected to an earthed mains socket-
outlet. Always disconnect the power cord or switch the wall socket off if the devicewould be left unused for a certain time to achieve zero
energy consumption.
Place the power cord in a way that people are unlikely to step on it. Do not place
anything on the power cord.
When cleaning the device, be sure to remove the power plug. Use a piece of soft
cloth rather than industrial chemical to clean the device. Never pour any liquid
into the opening; that could damage the device or cause electric shock.
If any of the following situations arises, get the device checked by service personnel:
The power cord or plug is damaged.
Liquid has penetrated into the device.
The device has been exposed to moisture.
The device does not work well or you can not get it work according to user’s manual.
The device has dropped and damaged.
The device has obvious sign of breakage
Recommendations:
1. Take a 10-minute break for every 30 minutes of screen time.
2. Children under 2 years of age should have no screen time. For children aged
2 years and over, screen time should be limited to less than one hour per day
Warning!
Overuse of screens is likely to affect eyesight.
6
KRYPTO
GAMING MONITOR SERIES
EN IMPORTANT SAFETY PRECAUTIONS
Do not place the monitor in rain, humid environment or open the monitor case to avoid any shock, electrical hazards, and/or mechanical hazards.
Operation
• Keep the monitor out of direct sunlight and away from stoves or any other heat source.
• Keep the monitor out of water source
• Remove any object that could fall into ventilation holes or prevent proper cooling of the monitor's electronics.
• Do not block the ventilation holes.
• Do not knock or drop the monitor during operation or transportation.
Maintenance Guidelines
CAUTION
• Do not place the monitor in rain, humid environment or open the monitor case to avoid any shock, electrical hazards, and/or mechanical hazards.
• Before cleaning the monitor, unplug the monitor power cable from the electrical outlet.
Caring for Your Monitor
• To clean your screen, slightly dampen a soft, clean cloth with water.
• If possible, use a special screen-cleaning tissue or solution. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.
• Use a slightly dampened, warm cloth to clean the frame. Avoid using detergent of any kind as some detergents might leave a milky film on the plastics.
• Unplug the monitor if you are not going to use it for an extendedperiod of time.
• To avoid the risk of shock or permanent damage to the set, do not expose the monitor to dust, rain, water, or excessive moisture environment. If your monitor gets wet,
wipe it with dry cloth as soon as possible.
Monitor x1
DP Cable x1 Power Adaptor x 1 User manual x1Wall mounted adapter x1
Stand stem x 1 Stand base x 1 KM4*10x7 Screw Bolts
(for Stand Installation)
1. Product Description
The screws come in different sizes: NO.1 (11mmx4pcs), NO.2 (35mmx4pcs).
Extra screws may be included as backup.
7
KRYPTO
GAMING MONITOR SERIES
EN
2. Product Overview
2.1 Monitor Buttons
2.2 Monintor Ports
Press Rocker up Scene mode.
Power Buon Turn o monitor (longpress).
Press Rocker
to the le Input selection.
Press Rocker
down Game Crosshair.
Press Rocker
to the right main menu.
LED Indicator Changes colors to indicate status.
HDMI Connectors Insert one end of the HDMI cable into the computer's HDMI output and
connect the other end to the monitor's HDMI port.
DP Connectors Insert one end of the DP cable into the computer's DP output and connect
the other end to the monitor's DP port.
Power Connector Insert the power cable to supply power to the monitor.
1
7 8 9
2 3 4 5
6
1
8
7
3
5
6
2
9
4
8
KRYPTO
GAMING MONITOR SERIES
EN 3. Stand Installation
Keep the foam underneath the monitor before attaching the stand.
Open the package to take out foams and put
them on a flat tabletop.
Open the package and take out the product with the foam still a ached. Carefully place it on a
desk or table and shield the screen.
Take out the base, align it with the bottom of the stand and tighten them with 2 screws.
Take out the stand, install it on the rotary shaft 1 of the
monitor and tighten them with 2 screws.
1
3
2
Monitor
Screws
Screws
9
KRYPTO
GAMING MONITOR SERIES
EN
Open the package, take out the product with foam still attached, and gently place it on a desktop or table.
This monitor only includes screws which may be used when
aaching the monitor to a VESA 75*75mm type mount. No VESA
mount or mounting accessory is included.
Open the top cover of poly dragon, take out the film covering bag of the fuselage, and then place the
fuselage in the bottom cover of poly dragon. Take out the wall mounted adapter and 2 screws. Lock the
wall mounted adapter with two PM4 * 10mm screws.
Follow the directions received with your mount, stand, or accessory and install the monitor on the wall or fixture as desired.
Do not discard the original screws. These may be needed for future use.
4. Wall Mounting
1
2
3
Stand Base
Stand Stem
Wall mounted adapter
Screws
Mount
(not included)
10
KRYPTO
GAMING MONITOR SERIES
EN 5.Basic Operation
Adaptive-Sync
This feature is off by default. To activate, you must have hardware with Adaptive-Sync capability, a DP or HDMI cable, and the latest
graphic drivers.
After connecting your computer and monitor with a DP or HDMI cable, you may receive a prompt to enable the feature on your
computer. If you do not, you may need to enable the function in your graphics card menu. See your graphics card manufacturer’s
documentation for instructions.
1. Insert one end of the DP cable into your PC's graphics card. A
HDMI cable may also be used. A HDMI cables is not included.
2. Connect the power cable to your monitor, then connect the other
end to your power source. It is recommended that you use a surge
protector with adequate voltage if a wall outlet cannot be reached
directly.
DP Connectors
Indicator Light
HDMI Connectors
6. lndicator Light
Solid blue light indicates power is on and the monitor is operating nor mally. Flashing blue light indicates
no video source, no horizontal or vertical signal has been detected or voltage is low. Please ensure your
computer is on and all video cables are fully inserted and/or connected.
Ce manuel convient aux modèles suivants
1
Table des matières
Langues :
Autres manuels Oversteel Moniteur
