Ovation Explorer Manuel utilisateur

USER MANUAL

EXPLORER

Caution!

Be careful with your operations. With a dangerous voltage you can suffer a dangerous

electric shock when touching the wires!

Keep this device away from rain and moisture!

Make sure it is grounded when using it!

Unplug mains lead before opening the housing!

For your own safety, please read this user manual carefully before you initial start-up.

Every person involved with the installation, operation and maintenance of this device has

- be qualified

- follow the instructions of this manual

Introduction

Thank you for having chosen Explorer moving head wash light. You will see you acquired

a powerful and versatile device. Unpack your item. Before you initial start-up, please make

sure that there is no damage caused by transportation. Should there be any, consult your

dealer and do not use the device.

Safety instructions

This device has left our premises in absolutely perfect condition. In order to maintain this

condition and to ensure a safe operation, it is absolutely necessary for the user to follow

the safety instructions and warning notes written in this user manual. Always disconnect

from the mains, when the device is not in use or before cleaning it. Keep away children

and amateurs from the device! There are no serviceable parts inside the device.

Maintenance and service

operations are only to be carried out by authorized dealers.

Features

36 * 10W high power RGBW 4-in-1 LED

Extremely Long Life:50,000 Hr and low power consumption

DMX channel:7/13 channels

Zoom function

Beam angle:15-60°

Pan/tilt movement: 8 bit and 16 bit resolution

Three operation modes: DMX 512 protocol, stand alone, master/slave

For smooth and precise resolution

Pan: 540 optional, Tilt: 270 movement

High speed of pan/tilt movement, speed of pan/tilt movement is adjustable

Scan position memory, auto reposition after unexpected movement

Strobe effect with 18 flashes per second and pulse effect

General dimming and blackout for all four colors

Excellent color mixing and rainbow effect

Friendly blue LCD display

Preset program: 7 built in programs can be called up via DMX controller

Dimension

Installation

On the rear panel of the item you can find an 3pin XLR-jack (DMX Out) and an 3pin

XLR-plug (DMX In), which can be used for connecting several devices. Choose the device

which is to control the effects. Connect the DMX OUT-jack with the DMX IN-plug of the

next device.

DMX-512 connection / connection between fixtures

Occupation of the XLR-connection:

If you are using controllers with this occupation, you can connect the DMX-output of the

controller directly with the DMX-input of the first fixture in the DMX-chain. If you wish to

connect DMX-controllers with other XLR-outputs, you need to use adapter-cables.

Building a serial DMX-chain:

Connect the DMX-output of the first fixture in the DMX-chain with the DMX-input of the

next fixture. Always connect one output with the input of the next fixture until all fixtures

are connected.

DMX-512 connection with DMX terminator

For installations where the DMX cable has to run a long distance or is in an electrically

noisy environment, such as in a discotheque, it is recommended to use a DMX terminator.

This helps in preventing corruption of the digital control signal by electrical noise. The

DMX terminator is simply an XLR plug with a 120 resistor connected between pins 2 and

3,which is then plugged into the output XLR socket of the last fixture in the chain. Please

see illustrations below.

Caution: At the last fixture, the DMX-cable has to be terminated with a terminator. Solder

a 120 resistor between Signal (–) and Signal (+) into a 3-pin XLR-plug and plug it in the

DMX-output of the last fixture.

Connection with the mains

Connect the device to the mains with the enclosed power supply cable.

Overview

(1) Lens (9) Enter-button

(2) Yoke (10) Control Board

(3) Base (11) Housing

(4) Carrying handle (12) 3-PIN DMX output socket

(5) LCD-Display (13) 3-PIN DMX input socket

(6) Mode/esc-button (14) Power switch

(7) Up-button (15) Fuse

(8) Down-button (16)Power supply

Control menu map

Operation

Projector DMX starting address selection

All fixtures should be given a DMX starting address when using a DMX signal,so that the

correct fixture responds to the correct control signals. This digital starting address is the

channel number from which the fixture starts to listen to the digital control information sent

out from the DMX controller. The allocation of this starting address is achieved by setting

the correct number on the display located on the base of the device.

You can set the same starting address for all fixtures or a group of fixtures, or make

different address for each fixture individually.

If you set the same address, all the units will start to listen to the same control signal from

the same channel number. In other words, changing the settings of one channel will affect

all the fixtures simultaneously.

If you set a different address, each unit will start to listen to the channel number you have

set,based on the quantity of control channels of the unit. That means changing the

settings of one channel will affect only the selected fixture.

In the case of the moving head, which is 13 channels fixture when you select the standard

channel mode, you should set the starting address of the first unit to 1, the second unit to

17(16+1), the third unit to 33(16+17), and so on.

Control Board

The Control Board offers several features: you can simply set the starting address, switch

on and off the lamp, run the pre-programmed program or make a reset.

The main menu is accessed by pressing the Mode-button until the display starts flashing.

Browse through the menu by pressing the Up-button or Down-button. Press the

Enter-button in order to select the desired menu. You can change the selection by

pressing the Up-button or Down-button. Confirm every selection by pressing the

Enter-button.You can leave every mode by pressing the Mode-button.The functions

provided are described in the following sections.

DMX Protocol

Mode/Channel Function Value Type of control

1/7 2/13

CH1 General dimming 0-255 proportional

CH2 Strobe 0-255 proportional

CH1 CH3 Red 0-255 proportional

CH2 CH4 Green 0-255 proportional

CH3 CH5 Blue 0-255 proportional

CH4 CH6 White 0-255 proportional

CH7 CT 0-8

9-255

OFF

3200K-6500K

CH5 CH8 X-movement 0-255 0-540°

CH6 CH9 Y-movement 0-255 0-270°

CH10 X/Y-movement speed 0-255 Inversely proportional

CH11 CMY color mixing 0-255 proportional

CH12 CMY

0-95

96-127

128-255

OFF

Reset(stop 5S)

built-in program

CH7 CH13 Zoom 0-255 proportional

Choose Channel mode

Turn on the fixture,you will see the follow:

Then,press"ENTER" to enter the modes of choosing DMX channels.

Mode 1:

MOVING LED

D:001 no

MAIN MENU

Address

MAIN MENU

Change-CH

DOWN

Channel Function

CH1 Red

CH2 Green

CH3 Blue

CH4 White

CH5

X-movement

CH6 Y-movement

CH7 Zoom

Mode 2:

Channel Functions

CH1 General dimming

CH2 Strobe

CH3 Red

CH4 Green

CH5 Blue

CH6 White

CH7 CT

CH8 X-movement

CH9 Y-movement

CH10 X/Y-movement speed

CH11 CMY

CH12 CMY

CH13

Zoom

Set DMX address

Display the DMX 512 value of each channel.With this function you can display the DMX

512 value of each channel. The display automatically shows the channel with a value

changing.

Synchronization & master /slave mode

Take some items and connect them by DMX cables, disconnect the items from DMX

controller, the items will wok synchronously, one as master, the others as slave.

Auto Program

With this function, you can run the internal program. You can select the desired program

under.You can set the number of steps under .You can edit the individual scenes

under .With this function, you can run the individual scenes either automatically, i.e. with

the adjusted Step-Time.

Error message

When you turn on the fixture, it will make a reset first. The display may show XXer while

there are problems with one or more channels. XX stands for channel1, 2, 3,etc who has

the testing sensor for positioning.For example,when the display shows Red Er , it means

there is some error in channel 1,If there are some errors on channel 1, channel 2, channel

5 at the same time, you may see the error message Red Color Er , Green Er ,Pan Er flash

repeated for 5 times, and then the fixture will generate a reset signal, all the stepper reset.

If the fixture remain error message after performing reset more than 3 times, it will detect

whether the fixture has more than 3 errors. If the fixture has more than 3 errors (including

3 errors), all the channels can not work properly; but if the fixture has less than 3 errors,

only the channels which have errors can not work properly, others can work as usual.

Technical specifications

Power supply: 100V~240V AC,50Hz / 60Hz

Power consumption: max. 430W

Net weight: 9.8KGS

Gross weight: 11.5KGS

Packing dimensions: 37x33x46cm

Remark: All information is subject to change without prior notice.

Table des matières

Autres manuels Ovation Matériel de DJ

Ovation

Ovation Pioneer 100 ZOOM WW/CW Manuel utilisateur

Ovation

Ovation C-805FC Manuel utilisateur

Ovation

Ovation B-2805FC Manuel utilisateur

Ovation

Ovation E-260CW Manuel utilisateur

Ovation

Ovation TRUECOLOR 336M Manuel utilisateur

Ovation

Ovation B-565FC Manuel utilisateur

Ovation

Ovation Ovation E260CW14 Manuel utilisateur

Ovation

Ovation POWER PAR 350 TW Manuel utilisateur

Ovation

Ovation E-910FC Manuel utilisateur

Ovation

Ovation MINI FRESNEL 50TZ Manuel utilisateur

Ovation

Ovation Mainforce 1240 Manuel utilisateur

Ovation

Ovation CYC 3 FC Manuel utilisateur

Ovation

Ovation E-260WW IP Manuel utilisateur

Ovation

Ovation GR-1 IP Manuel utilisateur

Ovation

Ovation CYC RGBW Manuel utilisateur

Ovation

Ovation B-2805FC Manuel utilisateur

Ovation

Ovation F-265WW Manuel utilisateur

Ovation

Ovation PANTO LEKO 60 Manuel utilisateur

Ovation

Ovation H-605FC Manuel utilisateur

Ovation

Ovation MIN-E-10CW Manuel utilisateur

Ovation

Ovation F-55WW Manuel utilisateur

Ovation

Ovation C-805FC Manuel utilisateur

Ovation

Ovation Mainforce 1240 Manuel utilisateur

Ovation

Ovation E-260WW Manuel utilisateur

Manuels Matériel de DJ populaires d'autres marques

ALPHA LITE

ALPHA LITE ALPHA 1500 Manuel du propriétaire

Chauvet

Chauvet OVATION E-930VW Manuel utilisateur

Zumtobel

Zumtobel APHRODITE Home Manuel utilisateur

Snow Masters

Snow Masters Zig Oscillator Manuel utilisateur

EuroLite

EuroLite 50530554 Manuel utilisateur

Beamz

Beamz BUV243 Manuel utilisateur

thomann

thomann Stairville DJ Lase 40-G MK-III Manuel utilisateur

Eagletone

Eagletone 6 Eyes Flower Manuel utilisateur

EuroLite

EuroLite FLD-1508 Manuel utilisateur

Technical Pro

Technical Pro LG8xSEA Manuel utilisateur

JB Systems

JB Systems Lounge Laser DMX Manuel utilisateur

Lightmaxx

Lightmaxx Vega Halo 90 Manuel utilisateur

Elation

Elation FUZE WASH Z350 Manuel utilisateur

Maverick

Maverick MK3 WASH Manuel utilisateur

Infinity

Infinity TF-260C7 Fresnel Manuel utilisateur

Chauvet

Chauvet EVE E-50Z Manuel utilisateur

Eliminator Lighting

Eliminator Lighting E 138 Manuel utilisateur

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manuel utilisateur