Outsunny 84F-006V80 Fiche technique
USING INSTRUCTION
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
INafc033_US_CA
84F-006V80
Check the manuals for your mobile phone or electron-
ic product when reading this manual for a better
operating experience.
The first charge is important to the battery perfor-
mance of the power station. Connect to a power
socket until fully charged before the first use
Consultez les manuels de votre téléphone portable ou
de votre produit électronique lorsque vous lisez ce
manuel pour une meilleure expérience d'utilisation.
La première charge est importante pour les perfor-
mances de la batterie de la station d'alimentation.
Branchez-la sur une prise de courant jusqu'à ce
qu'elle soit complètement chargée avant la première
utilisation.
-1-
3-14
15-26
-2-
To prevent harm or damage to you or the product, read the manual carefully
before using.
1.Storage
● Do not expose the product to extreme cold or hot temperatures (below -0 °C
or above 40 °C) when storing.
● Do not place the product near any heating appliances.
● Keep the product out of wet environments.
● Keep the product away from flammable liquids, gases or explosive materi-
als.
● Keep the product away from dust.
● Do not store the product with coins, jewellery, keys or other metal objects. It
could damage the product, reduce the charging capacity, or explode. The
product should be stored in a cool and dry place.
2. Charger
● Do not use a faulty charger or one that has a mismatched output voltage.
● Use the original charger. Incompatible or unqualified chargers are a safety
hazard and could damage the product.
● Do not use chargers without a safety certification.
3. When not being used
● Charge at least once every six months to preserve the life of the product
(battery cells). When using the product after a long time, make sure it is fully
charged before use. When the product is off, disconnect the power from both
ends.
4. Disposal of faulty/old batter and charger
● Dispose of products in accordance with regulations. Do not dispose the
built-in batteries as domestic wate to avoid an explosive hazard and/or pollu-
tion.
5.Do not squeeze, pierce or subject the product to high external pressure. This
is a potential fire or explosion hazard.
6. Keep the product out the reach of children.
-3-
7. This product is not to be used as a substitute for the mains AC power
supply.
8. Do not paint or put stickers on the appliance. This could affect the normal
functioning of the product.
9. Environment temperature for charging.
● Do not store the product in hot or cold places. Use the product in a room
temperature of 0-60°C.
● The summer temperature of a closed car can be as high as 80 °C. Having
the product in the car is a safety hazard to you and the vehicle.
● Keep out of direct sunlight. When charging, the operating temperature
should be between 0-40°C.
● Do not store the product near or inside heaters, microwaves or hot cooking
products. It could overheat and become a fire hazard.
10. Product cleaning
● Use a dry towel to wipe the product or charger.
● Do not use corrosive or cleaning chemicals.
11. Do not disassemble, repair or modify the product, this will void the warran-
ty.
-4-
1. When using the product for the first time, the actual power level may not
match with the indicator. Charge the product fully 2-3 times for it to return to
normal.
2. When in use, do not cover with towels, clothing, etc. Ensure you keep more
than 10cm of heat dissipation around the product.
3. Keep dry and do not let moisture or liquid enter this or other electrical prod-
ucts. This could damage the internal parts or circuits of the device.
● If the product is wet, do not use. If it is already on, turn off immediately. If you
cannot turn it off, leave it and contact the customer support service immediate-
ly.
4.Do not use the product where lots of dust may occur. Dust can cause prod-
uct failure and is a fire or explosion hazard.
5. Do not use the product near anything flammable or explosive, such as gas-
oline, gas, chemical agents, mines, etc. This is a safety hazard that could
cause injury or death. Always operate in accordance with regulations, instruc-
tions and signs when using in potentially explosive environments.
6. Do not use the product near anything corrosive, as it could damage the
product.
7. Place the product on a flat surface to prevent from falling and causing
damage.
8. Recharging the product
● Use the Yoobao original charger to charge the product.
● Do not exceed the charging time of the product. Unplug the charger when
fully charged. It is recommended to charge during the day or when someone is
present to keep watch.
● When charging, the product may heat up, this is normal. Be careful when
handling.
9.Discharging the product
● When discharged and the remaining power is low or the indicator flashes,
stop using immediately and fully charge before using again.
-5-
84F-006
84F-006
-6-
84F-006Model
110 60
-7-
Remaining power percentage
Battery symbol Press to turn reading
lamp on
Press to turn long-range
light on
Remaining usage time. Only for
reference (hours and minutes).
-8-
Please read before using
Accessories are equipped. When using solar panels, It is advised to use 100W
to get a higher charging efficiency.
Do not use on other electrical appliances. The product is fully charged then the
power indicator doesn’t flash and stays on. Stop charging and unplug the
power cord from the AC socket.
Charge the product in four ways:
1. Use the adapter to charge. Plug the adapter pin into the 110V AC power.
Connect the other end of the cable to the ‘DC5521 IN’ to charge the product.
2. Charging with a solar panel: Connect one end of the cable to the solar panel
(solar panel needs to be purchased separately) and insert the other end into
the DC input ‘DC5521 IN’ to charge the product. It is recommended to buy
solar panels specifically designed for this product.
7. Charging the product
-9-
4. Using a PD wall charger
Have a PD wall charger and a Type-C cable that supports a PD quick charge.
Plug the charger into a socket and connect the power station with the cable
through ‘C1 IN/OUT’.
3. Using a car charger
Connect the car charger into the cigarette lighter and the other end into DC
input ‘DC5521 IN’. To preserve the car battery, do not use when the car is not
running.
-10-
Table des matières
Langues :
