Oursson HB6060 Manuel utilisateur
Hand blender HB6060
Operation manual
Congratulations on purchasing the Oursson Hand Blender!
CONTENTS
5
6 Chapter1:Introduction
6 Safety Instructions
8 Recommendations
9 Complete set
10 Parts of the structure
11 Chapter2:Operation
11 Whiskattachment
11 Measuring cup
12 Nozzle for blending
12 Bracket for vertical mounting and storage
13 Chopper attachment
15 Operation
15 Power Control
16 Recommendations for grinding various products
17 Cleaning and Maintenance
17 Quick Clean
17 Mounting the wall bracket
18 Chapter3:Other
18 Specifications
19 Product Certification
20 Servicing
INTRODUCTION
6
Dangersymbol
A reminder to user about high voltage.
Warningsymbol
A reminder to user about the necessity
of operating exactly according to the instructions.
When using electrical appliances should take
the following precautions:
• Use the device according to the following
operation guide.
• Install the device on a stable surface.
• Use only the tools which are the included
in the product set.
• To protect against risk of electrical shock
do not put motor body, cord, or electrical
plug of the blender in water or other liquid.
If for some reason the water got into the
unit, contact an authorized service center
(ASC) OURSSON AG.
• For power supply use a power grid with
proper characteristics.
• Do not use the device in areas where
the air can contain vapors of flammable
substances.
• Never attempt to open the device by
yourself – it could possibly be the reason
of an electrical shock, can lead to product
malfunction and will invalidate the
manufacturer’s warranty. For repair and
maintenance, contact only authorized
service centers meant for repair of products
under the trademark OURSSON.
• When moved from a cool to a warm place
and vice versa unpack it before use and
wait 1-2 hours without turning it on.
• In order to prevent electrical shock do not
immerse the entire product or the wires into
the water.
220-240 В
SAFETYINSTRUCTIONS
INTRODUCTION
7
• Be particularly careful and cautious when
using the device near children.
• Do not touch any moving parts, as this may
cause injury.
• The power cord is specially made relatively
short in order to avoid the risk of injury.
• Do not allow the cord to hang over
the sharp edge of the table or touch hot
surfaces.
• Do not connect this device to a grid which
is overloaded with other appliances:
it can lead to the fact that the device
will not function properly.
• Do not install the device near gas and
electric stoves and ovens.
• After use, make sure to disconnect the
device from the power grid.
• Keep the device from bumps, falls, vibration
and other mechanical influences.
• Make sure to disconnect the device from
the power grid before cleaning or changing
accessories.
• Do not use the device outdoors.
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge.
They can only use the device under the
supervision of the person responsible for
their safety, or after instruction on the safe
use of the device. Do not allow children to
play with the product.
• Use the product for its intended purpose.
• This product is intended only for use
in the home.
• If the power cord is damaged, it must be
replaced by a specialist from the authorized
service center ( ASC ) OURSSON AG
to avoid danger.
•
Do not use abrasive cleaning materials, organic
cleaning products (alcohol, gasoline etc.).
INTRODUCTION
8
• Do not operate without making sure
that the cap for chopping bowl is closed
correctly and firmly.
• Use only the parts included in the product kit.
• When cleaning the device it is allowed to
use a small amount of neutral detergent.
• Do not immerse the motor unit into water,
it may cause electrical shock.
• During operation, do not substitute the
blender blades close to hand, as well as
kitchen utensils to avoid injury and / or
damage to the instrument. Spatula can
be used only when the unit is turned off.
• To not dull knives, do not use the device
for crushing ice, coffee or a very solid
products, as well as for mixing solids.
• Before using the device, please read
the user manual. After reading, please
keep it for future use.
• All illustrations in this manual are schematic
representations of real objects, which may
differ from the actual images.
• To avoid injury before establishing knives,
put the chopping cup on a clean flat
surface.
RECOMMENDATIONS
NOTE! The operation of this device
in any case does not imply
the use of physical force to it,
as this may cause damage
to the product through the fault
of the user.
INTRODUCTION
9
COMPLETESET
Motor unit
Whisk attachment
Nozzle for blending
Chopper attachment 500 ml
Measuring cup 500 ml
Bracket for vertical mounting and storage
Operating manual with warranty card
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
INTRODUCTION
10
Blade for chopping
Chopping bowl
Adapter for whisk attachment
Whisk attachment
Measuring cup 500 ml
Cover lid
Bracket for vertical mounting and storage
4
5
6
7
8
9
2
3
4
5
6
7
9
8
10
11
12
13
14
1
1
2
3
12
13
14
10
11
PARTSOFTHESTRUCTURE
Speed Switch
On / Off button
Button for TURBO Mode
Motor unit
Nozzle for blending
Chopper
Cap for chopper
Table des matières
Autres manuels Oursson Appareils de cuisine
Oursson
Oursson MG5000 Manuel utilisateur
Oursson
Oursson MD2041 Manuel utilisateur
Oursson
Oursson MP5015PSD Mode d’emploi
Oursson
Oursson MF2005 Manuel utilisateur
Oursson
Oursson MS2050 Manuel utilisateur
Oursson
Oursson MG5020 Manuel utilisateur
Oursson
Oursson MP5010PSD Manuel utilisateur
Oursson
Oursson DH5000D Manuel utilisateur
Oursson
Oursson CH4010 Manuel utilisateur
Oursson
Oursson CH3020 Manuel utilisateur
Oursson
Oursson JM3300 Manuel utilisateur
Oursson
Oursson MP5021SD Manuel utilisateur
Oursson
Oursson DH2200D Manuel utilisateur
Oursson
Oursson MO2305 Manuel utilisateur
Oursson
Oursson MG5550 Manuel utilisateur
Oursson
Oursson AG5002D Manuel utilisateur
Oursson
Oursson VR1520 Manuel utilisateur
Oursson
Oursson MF3500D Manuel utilisateur
Oursson
Oursson CM0400 Manuel utilisateur
Oursson
Oursson TP3310PD Manuel utilisateur
