Oticon Chili BTE 13 SP Manuel utilisateur

INSTRUCTIONS FOR USE BTE 13 SP

Thank you

Thank you for choosing our product as your means to better hearing.

To support your efforts, we have put great care and attention into making sure that

your new hearing instruments are of the highest quality and that they are easy to

use and maintain.

We recommend that you read this manual carefully to achieve the maximum benefit

of your new hearing instruments.

Congratulations on your decision to actively improve your hearing with today’s most

advanced hearing technology in the market.

Contents

Instrument View BTE 13 SP 5

Changing batteries 7

Turning your instrument ON and OFF 9

Left/Right ear marking 10

Putting on your instrument 11

Push-button 12

Programs (Optional) 13

Volume Control 15

Volume Control and ConnectLine (Optional) 17

Stand-by (Optional) 18

Tamper-resistant battery door (Optional) 20

Telecoil (Optional) 21

Auto Phone (Optional) 22

DAI (Direct Audio Input) 24

IMPORTANT NOTICE

Please familiarise yourself with the entire contents of this booklet before using your

hearing instru ments. It contains instructions and important informa tion about the use

and handling of your hearing instru ments and batteries.

CAUTION

The BTE 13 SP is a powerful hearing instrument. In case you are fitted with BTE 13 SP,

never allow others to wear your hearing instruments as incorrect or wrongful usage

could cause permanent damage to their hearing.

FM 26

Caring for your hearing instrument 28

Seven easy steps to better hearing 35

Common problems and their solutions 40

Warnings Yellow Pages

Instrument View – BTE 13 SP

Battery size: 13

Microphone

openings

Volume

wheel

Push-button Earmould

Battery door

Sound hook

Plastic tube

Sound outlet

Ventilation

opening

Changing batteries

Your hearing instrument battery size is 13. Batteries

perform differently. Ask your hearing care professional

for help choosing the right battery quality for your

hearing instrument.

A worn out battery should be removed immediately

and disposed of according to local regulations.

When the battery power is low, you will hear 2 beeps.

This pre-warning starts when the battery has only a

few hours of operation left. The pre-warning will be

repeated in moderate intervals to indicate it is time

to change the battery.

If the battery runs out the instrument turns off. When

that happens, 4 beeps are played to indicate that the

instrument is no longer operating.

This is not an indication of a malfunction.

To replace the battery, follow these instructions:

• Open the battery door completely by pushing the raised edge on the bottom of

the instrument. To assist with the handling of the batteries, the magnet placed

at the end of the MultiTool can be used.

• Remove the sticky label from the + side of the new battery.

• The new battery may be inserted by using the magnetic end of the MultiTool.

Ensure that the positive (+) marking faces the positive (+) sign printed on the

battery door. Close the battery door.

If any moisture on the battery surface, it should be

wiped off before use. When you change the battery,

it will take a few seconds before the battery works

to full capacity. MultiTool

Turning your instrument ON and OFF

Turn ON your hearing instrument by closing the battery door completely with the battery

in place. When the battery door is closed the instrument will start up by playing a jingle.

This indicates that the battery is working and the instrument is operating.

Turn OFF your hearing instrument by opening the battery door slightly until a “click” is felt.

To preserve the battery, make sure your hearing instrument is switched off when

you are not wearing it.

IMPORTANT NOTICE

Open the battery compartment

fully to allow air to circu late

whenever you are not using

your hearing instrument,

especially at night!

Click

OFF

Click

1110

Left/Right ear marking

Hearing instruments are fitted to the uniqueness of each ear, which means if you have

two instruments then your left hearing instrument is programmed differently from your

right. That is why it is important to distinguish between the left hearing instrument and

the right.

In order to easily identify whether it is the left ear or right ear instrument, colour markings

may be applied inside the battery door.

Blue marks the LEFT instrument.

Red marks the RIGHT instrument.

Putting on your instrument

Place the tip of the earmould in your ear canal,

twisting slightly, making sure that the top part of the

earmould (A) is pushed behind and under the fold (B)

of your ear.

Gently pull up your ear and press the earmould in the

direction of the ear canal.

With the earmould positioned correctly in your ear,

place the hearing instrument behind your ear by lifting

its lower part and sliding it over the top of your ear.

12 13

Push-button

Your hearing instrument has a push-button for switching between different programs.

Programs (Optional)

Your hearing instrument can have up to 4 different programs.

When switching between the different programs, your hearing instrument will beep.

The number of beeps will indicate which program you are using.

One beep, when you switch to program 1

 Two beeps, when you switch to program 2

 Three beeps, when you switch to program 3

 Four beeps, when you switch to program 4

Press the button to go to the next program e.g from P1-P2.

14 1515

Volume Control

The volume wheel may be activated. The volume wheel allows you to adjust the volume

in specific situations to the level you feel comfortable with.

The volume wheel has markings 1, 2, 3 and 4 and a ‘click’ position:

The normal volume wheel setting is 3. When adjusting the volume to the normal level

you will hear a double beep.

Setting

4 Louder

3 Normal sound level - preferred

2Softer

‘click’ Inactive (silent and saving power)

Below you can see a description of the programs available in your hearing instrument.

Prg. 1:

Prg. 2:

Prg. 3:

Prg. 4:

Using 2 instruments

If you have two instruments the push-button on one instrument can be programmed to

change the program on both hearing instruments (Binaural Coordination). This means, when

you adjust the program for one instrument, it automatically adjusts the other.

16 1716

If you turn the wheel below 1 you can feel a ‘click’ and the instrument will become

inactive and silent. Use the inactive setting if you need to silence the instrument while

you have the instrument on.

Remember to adjust the volume to the normal setting 3 either before or after putting the

instrument on to assure good audibility.

Volume Control and ConnectLine (Optional)

Make sure to set the volume control on the instrument in the 1 to 4 range to enable use

of the Streamer for remote control, phone calls and TV/music streaming. Streaming

cannot be initiated while the instrument volume control is set to the inactive

‘click’ position.

If you use the Streamer to adjust the regular hearing instrument listening volume, the

resulting volume will no longer match the indications on the volume wheel. Turning the

volume control to the inactive ‘click’ position and back into the 1-4 range or turning the

instrument off and back on will reset the volume to the setting indicated on the volume

wheel.

When adjusting the volume to the preferred level you will hear a double beep.

During audio streaming, adjust the volume on the Streamer. The Streamer will control

the volume independently of the setting of the volume wheel.

IMPORTANT NOTICE

Do not use the inactive ‘click’ position as a switch off as the hearing aid still draws

power from the battery in this mode.

IMPORTANT NOTICE

Do not use the stand-by function as a switch off as the hearing aid still draws power

from the battery in this mode.

Stand-by (Optional)

Push the button for a minimum of 3 seconds to set the instrument in stand-by mode.

To reactivate the instrument, push the button briefly again.

Use the stand-by function if you need to silence the instrument while you have

the instrument on.

Using 2 instruments

If you have two instruments, the push-button on one

instrument can be programmed to set both hearing

instruments on stand-by.

Push 3 sec

Autres manuels pour Chili BTE 13 SP

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels oticon Prothèse auditive

oticon

oticon minirite Manuel utilisateur

oticon

oticon Dual Manuel utilisateur

oticon

oticon CROS miniRITE T Manuel utilisateur

oticon

oticon Acto CIC Manuel utilisateur

oticon

oticon miniRITE Alta2 Manuel utilisateur

oticon

oticon EduMic Manuel utilisateur

oticon

oticon Alta2 Pro Ti Manuel utilisateur

oticon

oticon Alta Manuel utilisateur

oticon

oticon STREAMER PRO Mode d’emploi

oticon

oticon minirite Manuel utilisateur

oticon

oticon More Manuel utilisateur

oticon

oticon Alta2 Pro Ti Manuel utilisateur

oticon

oticon Chili BTE 13 SP Manuel utilisateur

oticon

oticon CROS PX miniRITE R Manuel utilisateur

oticon

oticon BTE Nera2 Pro Manuel utilisateur

oticon

oticon RemoteCare Manuel utilisateur

oticon

oticon miniRITE Alta2 Manuel utilisateur

oticon

oticon BTE13 PP Manuel utilisateur

oticon

oticon miniRITE Alta2 Manuel utilisateur

oticon

oticon designRITe Alta Manuel utilisateur

oticon

oticon ConnectClip Manuel utilisateur

oticon

oticon CIC/MIC Manuel utilisateur

oticon

oticon REM AutoFit Manuel utilisateur

oticon

oticon Alta Manuel utilisateur

Manuels Prothèse auditive populaires d'autres marques

Sonic

Sonic Bliss miniBTE Manuel utilisateur

Lexie

Lexie B1 Manuel de la liste des pièces

Widex

Widex FM+DEX Manuel utilisateur

Siemens

Siemens Triano Manuel utilisateur

Camplicomms

Camplicomms HC-200 Manuel utilisateur

Widex

Widex SUPER 220 S2-VSD Manuel utilisateur

Phonak

Phonak Q90 Manuel utilisateur

Williams Sound

Williams Sound SoundPlus WIR 237 Mode d’emploi

Oticon Medical

Oticon Medical Ponto SoundConnector Manuel utilisateur

Siemens

Siemens Life micon Manuel utilisateur

Starkey

Starkey Destiny Manuel utilisateur

Audicus

Audicus The Icon Manuel utilisateur

Advanced Bionics

Advanced Bionics Slim HP Standard Manuel utilisateur

Widex

Widex DREAM440 THE DREAM SERIES Manuel utilisateur

Phonak

Phonak myPilot Manuel utilisateur

NIKEN

NIKEN NK-401 Manuel utilisateur

ON Semiconductor

ON Semiconductor Ezairo 7111 Pre Suite Manuel utilisateur

Sonetik

Sonetik GOHEAR Manuel utilisateur