Osram M51 Manuel utilisateur

M51 New Strobe Light

768 * 0.5W RGB 3in1；96*10W White LED Strobe

Light

User manual

ase

rea

ins

ction

refu

y before use

TABLE OF CONTENTS

1. Safety Instructions ...........................................................................3-4

2. Technical Specification ....................................................................5-6

3. Display and Menu...............................................................................6-8

4. DMX List ...........................................................................................9-21

5. Product Size .......................................................................................22

6. Attention ..........................................................................................22

7. Fixture Cleaning ...............................................................................23

statement

Fixtures should be fastened on the hooks with screws. Make sure the

installation is secure to prevent chattering and slipping during operation. Also

make sure that the structure of the connected luminaire can support the

luminaire 10 times the weight. At the same time, when installing the lamps,

they also use a safety rope to support the weight of the lamps by 12 times.

The installation of the equipment should be carried out by professionals, and it

should also be installed in places where people can't reach them casually or

where no one is free to pass by.

ety

nst

uctions

Please keep this User Guide for future consultation. If you sell the unit to another

user, be sure that they also receive this instruction booklet.

Unpack and check carefully there is no transportation damage before using

the unit.

Before operating, ensure that the voltage and frequency of power

supply match the power requirements of the unit.

It’s important to ground the yellow/green conductor to earth in order

to avoid electric shock.

The unit is for indoor use only. Use only in a dry location.

The unit must be installed in a location with adequate ventilation, at

least 50cm from adjacent surfaces. Be sure that no ventilation slots are

blocked.

Disconnect main power before replacement or servicing.

Make sure there are no flammable materials close to the unit while operating

as it is fire hazard.

Use safety cable when fixes this unit. DO NOT handle the unit by taking its head

only, but always by taking its base.

Maximum ambient temperature is Ta: 40℃. DO NOT operate it where the

temperature is higher than this Unit surface temperature may reach up to 85℃.

DO NOT touch the housing bare-hand during its operation. Turn off the power

and allow about 15 minutes for the unit to cool down before replacing or serving.

In the event of serious operating problem, stop using the unit

immediately.Never try to repair the unit by yourself. Repairs carried out by

unskilled people can lead to damage or malfunction. Please contact the

nearest authorized technical assistance center. Always use the same type

spare parts.

DO NOT touch any wire during operation as high voltage might be causing

electric shock.

Warning:

To prevent or reduce the risk of electrical shock or fire, do not expose the unit

to rain or moisture.

DO NOT open the unit within five minutes after switching off.

The housing, the lenses, or the ultraviolet filter must be replaced

if they are visibly damaged.

Caution:

There are no user serviceable parts inside the unit. DO NOT open the housing

or attempt any repairs yourself. In the unlikely event your unit may require

service, please contact your nearest dealer.

Installation:

The unit should be mounted via its screw holes on the bracket. Always ensure

that the unit is firmly fixed to avoid vibration and slipping while

operating. And make sure that the structure to which you are attaching the

unit is secure and is able to support a weight of 10 times of the unit’s weight.

Also always use a safety cable that can hold 12 times of the weight of the unit

when installing the fixture.

The equipment must be fixed by professionals. And it must be fixed at a place

where is out of the touch of people.

2. Technical Specifications

Light source: 768*0.5w RGB 3-in1 LED ,96*10w white led (6000K)

● Lamp life: ≥50000 hours

● Input voltage: AC100-250V ,50-60Hz

● Full power :1200W,Power factor PF≥0.98

● Beam angle: 130°

● Color system: RGB 3-in-1 + White LED

Control

DMX Channel:10/15/25/29 CH

Control Modes: DMX512/mater-Slave/Auto Run/Music/RDM

Pan/Tilt

Pan/:540°, accuracy 2.11°/step, fine-tuning accuracy: 0.008°;

Tilt:270°, accuracy 0.86°/step, fine-tuning accuracy: 0.0034°;

Using magnetic coded reset system

Construction

Menu display: 1.8-inch LCD color display; Chinese and English can be

switched at will, and the font can be reversed 180° display;

Data In/Out socket: 3-pin & 5-pin XLR sockets

Protection Rating: IP20

Working temperature: -10℃～45℃

Electronic control technology:

Menu or console control lamp reset;

0-100% dimming;

Constant current drive mode;

Temperature sensor detection, intelligent adjustment of light source power;

Lamp information query;

Intelligent fan speed control

Effect configuration:

full optical domain dimming, 65536-level dimming accuracy;

Fast strobe 1~25Hz;

White light is divided into 4 areas to control, and color is divided into 12 areas

to control;

Preset 56 kinds of effect macro function

Specification:

Dimension : 376×490×388mm; NW: 17kg;

3.Display and Menu:

Display:

MENU To select the programming functions

DOWN To go backward in the selected functions

uP To go forward in the selected functions

ENTER To confirm the selected functions

Set DMX

Address Code

1 Press "Menu" to "Set DMX Address",and press"ENTER" keys to enter

into

2 Show "Set DMX Address DMX Address:001",Press the "UP and DOWN"

keys to amended

3 Press "ENTER"keys to save and Exit,Press the"MENU"Keys does not

save and Exit

1.Mic Sense

001 - 100

Sound sensitivity adjustment

2.Language

English

Chinese

3.No Signal

1.（Black Out) 2.(Hold)

4.Fan Set

1.Auto 2.Low 3.High

Fan settings

5.Reset

Yes

6.Default

1.Yes 2.NO

Reset

7.Adjust

Pass Word：****

Pan

Change the value of Pan/Tilt to

correct the angle

Tilt

Address

Setting from 001 - 512

Rever

Pan Invert

1.YES 2.NO

X forward and reverse settings

Tilt Invert

1.YES 2.NO

Y forward and reverse settings

Display

1.YES 2.NO

Display font forward and

reverse settings

Information

1.CH Value

Each channel show CH value

2.Temp ____℃

Show the temperature of led

board

3.Soft V1.0

Show the version number

Channel

10 channels

15 channels

25 channels

29 channels

Mode

DMX 512

AUTO

Master/Alone

SOUND

Master/Alone

Manual

Master

Pan:0--255

Manual Control

Tilt:0--255

Red：0--255

Alone

Greed：0--255

Blue：0--255

White：0--255

Strobe：0-255

4. DMX Channel List:

Model 1 - CH 10

Channel

Display

Function

Value

CH-1

Pan

0-540° Pan control

0 --- 255

CH-2

Tilt

0-205° Tilt control

0 --- 255

CH-3

Dimmer

Linear dimming dark to bright

0--255

CH-4

Strobe

0--3

Synchro strobe speed

From slow to fast (1HZ-25HZ)

4--203

Random strobe

204--255

CH-5

Middle

White dimming

0--255

CH-6

Both sides

Red dimming dark to bright

0--255

CH-7

Both sides

Green dimming dark to bright

0--255

CH-8

Both sides

Blue dimming dark to bright

0--255

CH-9

Dimming mode

Model 1

0--49

CH-9

Dimming mode

Model 2

50--99

Model 3

100--149

Model 4

150--255

CH-10

Reset

0-250

Reset within 5s

251--255

Model 2 - CH 15

Channel

Display

Function

Value

CH-1

Middle

White dimming

0--255

CH-2

Middle

White fine-tuning

0--255

CH-3

Middle

Total dimming is linear dimming

from dark to bright

0--255

CH-4

Middle

Total dimming, fine-tuning control

0--255

CH-5

Middle - Strobe

0--3

Synchro strobe speed

4--203

Table des matières

Autres manuels Osram Matériel de DJ

Osram

Osram BY-P23B Manuel utilisateur

Osram

Osram Clay Paky Scenius Spot Manuel d'utilisation et d'entretien

Osram

Osram CLAYPAKY ALPHA WASH 1500 Manuel utilisateur

Osram

Osram CLAYPAKY AXCOR PROFILE 900 Manuel utilisateur

Osram

Osram Claypaky CloudIO Manuel utilisateur

Osram

Osram KREIOS PROFILE 80W WW Manuel utilisateur

Osram

Osram BY-P12 Manuel utilisateur

Osram

Osram ADB Stagelight LEXPERT PROFILE L Manuel utilisateur

Osram

Osram BY-P05 Manuel utilisateur

Osram

Osram BY-P06 Manuel utilisateur

Osram

Osram KREIOS PAR162W VNSP IP 100-240V Manuel utilisateur

Osram

Osram BY-M03B Manuel utilisateur

Osram

Osram Claypaky AXCOR PROFILE 600 TEATRO Manuel utilisateur

Osram

Osram ARCHISHAPE 2.0 Linear Manuel utilisateur

Osram

Osram Clay Paky MYTHOS Manuel utilisateur

Manuels Matériel de DJ populaires d'autres marques

ALPHA LITE

ALPHA LITE ALPHA 1500 Manuel du propriétaire

Chauvet

Chauvet OVATION E-930VW Manuel utilisateur

Zumtobel

Zumtobel APHRODITE Home Manuel utilisateur

Snow Masters

Snow Masters Zig Oscillator Manuel utilisateur

EuroLite

EuroLite 50530554 Manuel utilisateur

Beamz

Beamz BUV243 Manuel utilisateur

thomann

thomann Stairville DJ Lase 40-G MK-III Manuel utilisateur

Eagletone

Eagletone 6 Eyes Flower Manuel utilisateur

EuroLite

EuroLite FLD-1508 Manuel utilisateur

Technical Pro

Technical Pro LG8xSEA Manuel utilisateur

JB Systems

JB Systems Lounge Laser DMX Manuel utilisateur

Lightmaxx

Lightmaxx Vega Halo 90 Manuel utilisateur

Elation

Elation FUZE WASH Z350 Manuel utilisateur

Maverick

Maverick MK3 WASH Manuel utilisateur

Infinity

Infinity TF-260C7 Fresnel Manuel utilisateur

Chauvet

Chauvet EVE E-50Z Manuel utilisateur

Eliminator Lighting

Eliminator Lighting E 138 Manuel utilisateur

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manuel utilisateur