SAFETY INSTRUCTIONS
and safer when used within their quoted capacity range.
work for which they were not intended.
are recommended. Wear a hair net if you have long hair.
piece securely. This is safer than using your hand.
regulations and the instructions for changing cutting-off
extension cables regularly and replace them if damaged. Keep
handles dry and free from oil and grease.
using the electric tool, prior to maintenance, and when
changing attachments such as cutting-off wheels.
dangerous to use unsuitable accessories.
cause an injury.
the electric tool, carefully check that the safety devices or any
slightly damaged parts are working as intended. Check that
the moving parts are in good working order, that they do not
jam, and that no parts are damaged. All parts must be
correctly assembled and meet all the conditions required to
stated in the operating instructions, damaged safety devices
service centre. Have damaged switches replaced by a customer
cannot be turned on and off.
points toward the work piece.
Always switch off your electric tool before leaving it. Wait until
the tool stops moving completely.
conductor may only be connected to a matching socket-outlet.
liquids or gases.
components.
being used it should be kept in a dry, closed place out of
connecting up a dust extraction and collection system, make
sure that such a system is connected and in use.
cable to pull the plug out of the socket-outlet. Protect cables
from heat, oil and sharp edges.
squarely and keep your balance at all times.
when inserting the plug in the socket-outlet.
approved for outdoor use and which are marked accordingly.
distracted.
CAUTION! The use of mounted attachments and accessories
other than those intended may put you at risk of injury.
replacement parts. If not, the user may suffer an accident.
Additional safety rules for cutting-off machines
CAUTION!
unless it is fully
assembled and installed as described in this manual.
safety shoes, long tight sleeves and gloves.
beginning your work.
they are in good working order.
